M20_Ope_E - 第483页
Chapter 16 Dispenser 16-13 16-2 Library copying 16-2-1 User library and master library copying User and master libraries are provided for each type of data (component data, feeder data, supply data, pallet data, tray dat…
Chapter 16 Dispenser
16-12
16-1-3-4 Dispense nozzle data
This dispense nozzle data contains data related to the nozzle.
Menu: Dispense Nozzle Data
Window:
Nozzle Code Enter a nozzle code.
Right-click this cell to select a nozzle code.
This nozzle code will link with the nozzle code of the syringe data.
Comment Enter a comment.
Nozzle Type Specifies this nozzles type ("Single" or "Twin").
Right-click on the item to select the type.
Outer Diam. Enter an outer diameter of the nozzle.
(Unit: mm)
Inter Diam. Enter an internal diameter of the nozzle.
(Unit: mm)
Nozzle Pitch Enter the nozzle pitch (distance between the centers of the 2 nozzles) for twin
nozzles.
Nozzle Offset Tolerance For twin nozzles, the nozzle offset from the dot station's dispense points is
measured, and an error occurs if the deviation amount for 2 dispense points
exceeds this tolerance value.
Nozzle Tip Clearance The nozzle tip clearance corresponding to the internal diameter of the nozzle
is set automatically.
If the internal diameter of the nozzle is changed, this numeric value may also
be changed.
See [Clearance Adjust Value] of the dispense data described previously.
(Unit： mm)
Chapter 16 Dispenser
16-13
16-2 Library copying
16-2-1 User library and master library copying
User and master libraries are provided for each type of data (component data, feeder data, supply data,
pallet data, tray data, nozzle data, etc.).
User-created data can be saved in user library, and this data can then be used in other programs.
The master library is a read-only library which contains standard operation data which was saved by us
prior to shipment.
The user and master libraries are normally hidden.
Data from the master library can be copied to the user library for use.
Menu: Program data > component data / feeder data / supply data / pallet data / tray data / nozzle data
Action:
① At each data screen, click the [Function] > [Library search] item, or simply click the [Library search]
icon.
The keyboard's [F3] key can also be used for this purpose.
② The user and master libraries display at the bottom half of the screen.
The user library is white, and the master library is gray.
③ Data can be copied between the top half of the screen (type data) and the lower half of the screen
(user & master libraries) by using the mouse's drag-and-drop function.
Drag and drop desired
data to copy it.
Master Library (gray)
Various data
User Librar
y
(
white
)
[Search Library] icon
Chapter 16 Dispenser
16-14
④ The mouse's drag-and-drop function can also be used to copy data from the master library to the
user library.
Note: Use care when copying, because overwriting will occur if a same code name already exists at the copy
destination.
We therefore recommend changing the code name (rename) after copying component data.
Note: Data cannot be copied to the master library.
⑤ The user and master library display can be turned on and off.
To do this, click the [>>] button, then select (enter a check-mark) the library to be displayed.
The user and master libraries can also be displayed simultaneously.
A "sorting" function can be used by selecting (enter a check-mark) the [Auto sort] item, and then
clicking the <Search> button.
⑥ A search filter function is available.
Specify the "size", etc., then click the <Search> button to display the found candidates.
⑦ To turn the user and master library displays off at the lower half of the screen, click [Function] >
[Library search] again, or click the [Library search] icon.
The keyboard's [F3] key can also be used for this purpose.
[Hand Glass] button
[Hand Glass] button