M20_Ope_E - 第512页
Chapter 17 Multi Conveyor 17-2 Multi Conveyor Outline The “Multi Conveyor” detects the transferred boar d by the laser sensor fixed on the head assembly. There are no board arrival sensor and board stoppe r that a conven…
Chapter 17 Multi Conveyor
17-1
Chapter 17
Multi Conveyor
Multi Conveyor Outline
Pa
rameter Setti
ngs
PCB Data
Manual Op
erat
ion
Chapter 17 Multi Conveyor
17-2
Multi Conveyor Outline
The “Multi Conveyor” detects the transferred board by the laser sensor fixed on the head assembly.
There are no board arrival sensor and board stopper that a conventional conveyor system has.
The “Multi Conveyor” provides following features.
1. Entrance and/or Exit buffer conveyors are automatically chosen and work depending on the
board length. (“Entrance” or “Exit” must be selected to be used as a buffer conveyor for machines
M10 and D10.)
2. The position in conveyor width direction to detect the board by the laser sensor can be
programmed for a board with “Cutout”.
3. The board is clamped in the best position on the conveyor where close to the fixed camera for
saving the running time.
4. The board flow direction can be changed in the system parameter easily.
Parameter settings
Set the parameters for using multi conveyor.
【Menu】 System > System Parameter > Machine Config. 2
Chapter 17 Multi Conveyor
17-3
【Operation】
1. In case of machines M10 and D10, select the conveyor to be used as “Entrance” or “Exit” in the
system parameter: “Buffer on 2Drive Conveyor” for using 2 drive conveyor (board length330mm to
420mm) (see below).
This selection setting is not necessary for M20 machine.
2. Board flow direction can be changed in the system parameter “Board Flow”.
3. Save the system parameter and close the screen after changes.
4. The machine must be shut down and turned on the power again to be effective the changes.
【NOTE】 The operator who is “Forbidden” to change the system parameter in “Management > Operator
Management” is not allowed to change the settings accordingly.
Left to Right Left to Right
Board on
Entrance buffer
Production
board
Production
board
Board on
Exit buffer