MDO3000 Programmer Manual.pdf - 第1025页

Status and Events Execution Error The following t able lists the execution e rrors that are detected during execution of a command. T able 3-6: Execution Error Messages (EXE Bit 4) Code Message 200 Execution error 22 1 S…

100%1 / 1158
Status and Events
Table 3-4: No Ev
ent Messages
Code Message
0 No events to re
port; queue empty
1
No events to r
eport; new events pending *ESR?
Command Error
The following table shows the command error messages generated by improper
syntax. Check that the command is properly formed and that it follows the rules
in the section on command Syntax.
Table 3-5: Command Error Messages (CME Bit 5)
Code Message
100
Command error
101 Invalid character
102
Syntax error
103 Invalid separator
104 Data type error
105
GET not allowed
108 Parameter not allowed
109 Missing parameter
110
Command header error
112 Program mnemonic too long
113
Undefined header
120 Numeric data error
121 Invalid character in numeric
123 Exponent too large
124 Too many digits
130
Suffixerror
131
Invalid suffix
134
Suffix too long
140
Character data error
141 Invalid character data
144
Character data too long
150
String data error
151 Invalid string data
152
String data too long
160 Block data error
161 Invalid block data
170
Command expression error
171 Invalid expression
3-14 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
Status and Events
Execution Error
The following t
able lists the execution errors that are detected during execution of
a command.
Table 3-6: Execution Error Messages (EXE Bit 4)
Code Message
200 Execution error
221
Settings conflict
222
Data out of range
224 Illegal pa
rameter value
241 Hardware missing
250 Mass storage error
251 Missing m
ass storage
252 Missing media
253
Corrupt media
254
Media full
255
Directory full
256
File name not found
257 File name error
258 Medi
aprotected
259 File name too long
270 Hardcopy error
271 Har
dcopy device not responding
272 Hardcopy is busy
273 Hardcopy aborted
27
4
Hardcopy configuration error
28
0
Pr
ogram error
282
I
nsufficient network printer information
283 Network printer not responding
284 Network printer server not responding
286 Program runtime error
287
Print server not found
2200 Measurement error, Measurement system error
2201 Measurement error, Zero period
2202
Measurement error, No period, second waveform
2203
Measurement error, No period, second waveform
2204
Measurement error, Low amplitude, second waveform
2205
Measurement error, Low amplitude, second waveform
2206 Measurement error, Invalid gate
2207
Measurement error, Measurement overflow
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 3-15
Status and Events
Table 3-6: Execution Error Messages (EXE Bit 4) (cont.)
Code Message
2208
Measurement error, No backwards Mid Ref crossing
2209
Measurement error, No second Mid R ef crossing
2210
Measurement error, No Mid Ref crossing, second waveform
2211
Measurement error, No backwards Mid Ref crossing
2212 Measurement error, No negative crossing
2213 Measurement error, No positive crossing
2214
Measurement error, No crossing, target waveform
2215
Measurement error, No crossing, second waveform
2216
Measurement error, No crossing, target waveform
2217
Measurement error, Constant waveform
2219 Measurement error, No valid edge - No arm sample
2220 Measurement error, No valid edge - No arm cross
2221 Measurement error, No valid edge - No trigger cross
2222 Measurement error, No valid edge - No second cross
2223
Measurement error, Waveform mismatch
2224 Measurement error, WAIT calculating
2225
Measurement error, No waveform to measure
2226
Measurement error, Null Waveform
2227
Measurement error, Positive and Negative Clipping
2228
Measurement error, Positive Clipping
2229
Measurement error, Negative Clipping
2230
Measurement error, High Ref < Low Ref
2231 Measurement error, No statistics available
2233
Requested waveform is temporarily unavailable
2235 Math error, invalid math description
2240 Invalid password
2241
Waveform requested is invalid
2244
Source waveform is not active
2245
Saveref error, selected channel is turned off
2250
Reference error, the reference w aveform file is invalid
2253
Reference error, too many points received
2254
Reference error, too few points received
2259 File too big
2270 Alias error
2271 Alias syntax error
2273 Illegal alias label
2276 Alias expansion error
3-16 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual