MDO3000 Programmer Manual.pdf - 第1126页

Appendix G: Application M odule-enabled Commands Application Mo dule Commands DPO4USB, MDO3USB USB Serial Triggering and Analysis Module. Enables triggering on packet-level content for l ow-speed, full-speed, and high-sp…

100%1 / 1158
Appendix G: Application Module-enabled Commands
Application M o
dule
Commands
DPO4PWR,
MDO3PWR
POWer:SWLoss:DISplay
POWer:SWLoss:GATe:POLarity
POWer:SWLos
s:GATe:TURNON
POWer:SWLoss:NUMCYCles?
POWer:SWLoss:RDSon
POWer:SWLo
ss:REFLevel:ABSolute:GATE Mid
POWer:SWLoss:REFLevel:ABSolute:LOWCurrent
POWer:SWLoss:REFLevel:ABSolute:LOWVoltage
POWer:SWLo
ss:REFLevel:PERCent:GATEMid
POWer:SWLoss:REFLevel:PERCent:LOWCurrent
POWer:SWLoss:REFLevel:PERCent:LOWVoltage
POWer:SWL
oss:TOFF:ENERGY:MAX?
POWer:SWLoss:TOFF:ENERGY:MEAN?
POWer:SWLoss:TOFF:ENERGY:MIN?
POWer:SW
Loss:TOFF:POWer:MAX?
POWer:SWLoss:TOFF:POWer:MEAN?
POWer:SWLoss:TOFF:POWer:MIN?
POWer:S
WLoss:TON:ENERGY:MA X?
POWer:SWLoss:TON:ENERGY:MEAN?
POWer:SWLoss:TON:ENERGY:MIN?
POWer:S
WLoss:TON:POWer:MAX?
POWer:SWLoss:TON:POWer:MEAN?
POWer:SWLoss:TON:POWer:MIN?
POWer:
SWLoss:TOTal:ENERGY:MAX?
POWer:SWLoss:TOTal:ENERGY:MEAN?
POWer:SWLoss:TOTal:ENERGY:MIN?
POWer
:SWLoss:TOTal:POWer:MAX?
POWer:SWLoss:TOTal:POWer:MEAN?
POWer:SWLoss:TOTal:POWer:MIN?
POWe
r:SWLoss:VCEsat
POWer:TYPe
POWer:VOLTAGESOurce
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual G-17
Appendix G: Application Module-enabled Commands
Application Mo
dule
Commands
DPO4USB,
MDO3USB
USB Serial Triggering and Analysis Module. Enables triggering on packet-level content for l ow-speed,
full-speed, and high-speed USB s erial buses. Also enables analytical tools such as digital views of the
signal, bus vi
ews, packet decoding, search tools, and packet decode tables with time-stamp information for
low-speed, full-speed, and high-speed USB serial buses.
BUS:B<x>:USB:BITRate
BUS:B<x>:USB:PRObe
BUS:B<x>:U
SB:SOUrce:DIFFerential
BUS:B<x>:USB:SOUrce:DMINus
BUS:B<x>:USB:SOUrce:DPLUs
SEARCH:SE
ARCH<x>:TRIGger:A:BUS:B<x>:USB:ADDRess:HIVALue
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:ADDRess:VALue
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:CONDition
SEARCH:S
EARCH<x>:TRIGger:A:BUS:B<x>:USB:DATa:HIVALue
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:DATa:OFFSet
SEARCH:SEARCH<x>:TR IGger:A:BU S:B<x>:U SB:D ATa:SIZe
SEARCH:S
EARCH<x>:TRIGger:A:BUS:B<x>:USB:DATa:TYP e
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:DATa:VALue
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:ENDPoint:VALue
SEARCH:
SEARCH<x>:TRIGger:A:BUS:B<x>:USB:ERRTYPE
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:HANDSHAKEType
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:QUALifier
SEARCH
:SEARCH<x>:TRIGger:A:BU S:B <x>:USB:SO FFRAMENUMber
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:SPECIALType
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:SPLit:ET:VALue
SEARC
H:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:SPLit:HUB:VALue
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:SPLit:PORT:VALue
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:SPLit:SC:VALue
SEARC
H:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:SPLit:SE:VALue
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:TOKENType
TRIGger:A:BUS:B<x>:USB:ADDRess:HIVALue
TRIG
ger:A:BUS:B<x>:USB:ADDRess:VALue
TRIGger:A:BUS:B<x>:USB:CON D ition
TRIGger:A:BUS:B<x>:USB:DATa:HIVALue
TRI
Gger:A:BUS:B<x>:USB:DATa:OFFSet
TRIGger:A:BUS:B<x>:USB:DATa:SIZe
TRIGger:A:BUS:B<x>:USB:DATa:TYPe
TRI
Gger:A:BUS:B<x>:USB:DATa:VALue
TRIGger:A:BUS:B<x>:USB:ENDPoint:VALue
TRIGger:A:BUS:B<x>:USB:ERRTYPE
TR
IGger:A:BUS:B<x>:USB:HANDSHAKEType
G-18 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
Appendix G: Application Module-enabled Commands
Application M o
dule
Commands
DPO4USB,
MDO3USB
TRIGger:A:BUS:B<x>:USB:QUALifier
TRIGger:A:BUS:B<x>:USB:SOFFRAMENUMber
TRIGger:A:B
US:B<x>:USB:SPECIALType
TRIGger:A:BUS:B<x>:USB:SPLit:ET:VALue
TRIGger:A:BUS:B<x>:USB:SPLit:HUB:VALue
TRIGger:A:
BUS:B<x>:USB:SPLit:PORT:VALue
TRIGger:A:BUS:B<x>:USB:SPLit:SC:VALue
TRIGger:A:BUS:B<x>:USB:SPLit:SE:VALue
TRIGger:A:
BUS:B<x>:USB:TOKENType
DPO4VID HDTV and Custom (nonstandard) Video Triggering Module. Not necessary for MDO3000 series as these
features come standard.
TRIGger:A:VIDeo:CUSTom{:FORMat|:TYPe}
TRIGger:
A:VIDeo:CUSTom:LINEPeriod
TRIGger:A:VIDeo:CUSTom:SYNCInterval
TRIGger:A:VIDeo:STANdard (The application module enables the arguments for HDTV and custom
(nonsta
ndard) to be used with this command.)
VIDPic:AUTOContrast
VIDPic:AUTOContrast:UPDATERate
VIDPic
:BRIGHTNess
VIDPic:CONTRast
VIDPic:DISplay
VIDPic
:FRAMETYP e
VIDPic:LOCation:HEIght
VIDPic:LOCation:OFFSet
VIDPi
c:LOCation:STARt:LINE
VIDPic:LOCation:STARt:PIXel
VIDPic:LOCation:WIDth
VIDP
ic:LOCation:X
VIDPic:LOCation:Y
VIDPic:SOUrce
VID
Pic:STANdard
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual G-19