MDO3000 Programmer Manual.pdf - 第149页

Commands Listed in Alphabetical Order Examples ACTONEVENT:AC TION:EMAIL:SETUP :TOADDRESS “george.wilco x@tektronix.com” sets the recipient’ s email a ddress to george.wilcox@tektro nix.com. ACTONEV ent: ACTION:EMAIL:ST A…

100%1 / 1158
Commands Listed in Alphabetical Order
Examples
ACQUIRE:STOPA
FTER RUnsTOP
sets the oscilloscope to continually acquire data.
ACQUIRE:STOPAFTER? might return:ACQUIRE:STOPAFTER SEQUENCE
indicating th
at the next acquisition the oscilloscope makes will be of the
single-sequence type.
ACTONEVent:ACTION:AUXOUT:STATE
Sends a pulse to the Auxiliary Out port when a specified event occurs, or queries
the state of the “pulse to aux out” action. The default state is 0 (off).
To specify an event, use the command ACTONEVent:EVENTTYPe.
Group
Act on Event
Syntax
ACTONEVent:ACTION:AUXOUT:STATE <0|1|OFF|ON>
ACTONEVent:ACTION:AUXOUT:STATE?
Arguments
1, ON sends a pulse to the Auxiliary Out port when the specified event occurs.
0, OFF turns off this action.
Examples
ACTONEVENT:ACTION:AUXOUT:STATE ON specifies to send a pulse to the
Auxiliary Out port when the specified event occurs.
ACTONEVent:ACTION:EMAIL:SETUp:TOADDRess
Sets (or queries) the email address for the recipient when the
ACTONEVent:ACTION:EMAIL:STATE command is used.
To set up the email address for the sender, use EMAIL:SETUp:FROMADDRess.
Group
Act on Event
Syntax
ACTONEVent:ACTION:EMAIL:SETUp:TOADDRess <QString>
ACTONEVent:ACTION:EMAIL:SETUp:TOADDRess?
Arguments
Quoted string that represents the recipient’s email address. The maximum number
of characters allowed is 128.
2-118 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
Commands Listed in Alphabetical Order
Examples
ACTONEVENT:AC
TION:EMAIL:SETUP:TOADDRESS
“george.wilcox@tektronix.com”
sets the recipient’s email address to
george.wilcox@tektronix.com.
ACTONEVent:
ACTION:EMAIL:STATE
Sends an email when a specified event occurs, or queries the state of the “send
email” action. The default state is 0 (off).
To specify an email address for the recipient, use the command
ACTONEVent:ACTION:EMAIL:SETUp:TOADDRess
To specify an event, use the command ACTONEVent:EVENTTYPe.
Group
Act on Event
Syntax
ACTONEVent:ACTION:EMAIL:STATE <0|1|OFF|ON>
ACTONEVent:ACTION:EMAIL:STATE?
Arguments
1, ON sends an email when the specified event occurs.
0, OFF turns off this action.
Examples
ACTONEVENT:ACTION:EMAIL:STATE ON specifies to send an email when the
specified event occurs.
ACTONEVent:ACTION:PRINT:STATE
Sends a screen image to a printer when a specified event occurs, or queries the
state of the “
send screen image” action. The default state is 0 (off).
To specify an event, use the command ACTONEVent:EVENTTYPe.
Group
Act on Event
Syntax
ACTONEVent:ACTION:PRINT:STATE <0|1|OFF|ON>
ACTONEVent:ACTION:PRINT:STATE?
Arguments
1, ON sends a screen image to the printer when the specified event occurs.
0, OFF turns off this action.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-119
Commands Listed in Alphabetical Order
Examples
ACTONEVENT:AC
TION:PRINT:STATE ON
specifies to send a screen image to the
printer when the specified event occurs.
ACTONEVent:ACTION:SAVEIMAGE:STATE
Saves a screen image to file when a specified event occurs, or queries the stateof
the“savescreenimagetoafile”action.Thedefaultstateis0(off).
To specify an event, use the command ACTONEVent:EVENTTYPe.
Group
Act on Event
Syntax
ACTONEVent:ACTION:SAVEIMAGE:STATE <0|1|OFF|ON>
ACTONEVent:ACTION:SAVEIMAGE:STATE?
Arguments
1, ON saves a screen image to a file when the specified event occurs.
0, OFF turns off this action.
Examples
ACTONEVENT:ACTION:SAVEIMAGE:STATE ON specifies to save a screen image
to a file when the specified event occurs.
ACTONEVent:ACTION:SAVEWFM:STATE
Saves the currently selected waveform data to a file when a specified event occurs,
or queries the state of the “save waveform to file” action. The default state is 0
(off).
To specify an event, use the command ACTONEVent:EVENTTYPe.
Group
Act on Event
Syntax
ACTONEVent:ACTION:SAVEWFM:STATE <0|1|OFF|ON>
ACTONEVent:ACTION:SAVEWFM:STATE?
Arguments
1, ON saves the waveform to a file when the specified event occurs.
0, OFF turns off this action.
Examples
ACTONEVENT:ACTION:SAVEWFM:STATE ON specifies to save a waveform to a
file when the specified event occurs.
2-120 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual