MDO3000 Programmer Manual.pdf - 第179页

Commands Listed in Alphabetical Order Arguments POWer sets the a pplication type to power analysis. LIMITMask sets the application type to limit mask test. VIDPic sets the application type to video picture. ACTONEVent se…

100%1 / 1158
Commands Listed in Alphabetical Order
Syntax
APPLication:L
ICENSE:SLOT<x>:TYPe?
Related Commands
APPLication:LICENSE:SLOT<x>:TRANSFER,
APPLication:LICENSE:SLOT<x>:LOCation?
Examples
APPLication:MODule:SLOT1:TYPe? might return DPO4AUTO, indicating that
the DPO4AUTO license is installed in slot 1.
APPLication:TYPe
This command sets or returns the application type. These are the applications
available when the front panel "Test" button is pressed. The query form willreturn
NONe if none of the supported test application modules are installed.
Attempting to set the application type to a type with no application module
installed will result in a settings conflict error event.
NOTE. The Video Picture features are standard on MDO3000 and
MDO4000C series models. They require the
DPO4VID application module for
use with MSO/DPO4000B, MDO4000 and MDO4000B models.
NOTE. The Act on Event features are standard on all models. The Limit/Mask and
Power features are optional for all models.
Conditions
Video Picture commands are available for MDO3000 and MDO4000C series
models. They require the DPO4VID application module for use with
MSO/DPO4000B, MDO4000 and MDO4000B models
The Limit/Mask and Power features require the MDO3LMT or MDO3PWR
application modules for the MDO3000 series models, or the DPO4LMT or
DPO4PWR application modules for the MDO4000/B/C series.
Group
Miscellaneous
Syntax
APPLication:TYPe {POWer|LIMITMask|VIDPic|ACTONEVent|NONe}
APPLication:TYPe?
Related Commands
All of the commands associated with the specified application type.
2-148 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
Commands Listed in Alphabetical Order
Arguments
POWer sets the a
pplication type to power analysis.
LIMITMask sets the application type to limit mask test.
VIDPic sets the application type to video picture.
ACTONEVent sets the application type to act on event.
NONe
Returns
The query form will return NONe if none of the supported application modules
are installed.
Examples
APPL:TYP? might return LIMITMASK, indicating that the DPO4LMT application
module is currently being used.
AUTOSet (No Query Form)
Sets the vertical, horizontal, and trigger controls of the oscilloscope to
automatically acquire and display the selected waveform.
Group
Miscellaneous
Syntax
AUTOSet {EXECute|UNDo}
Arguments
EXECute autosets the displayed waveform.
UNDo restores the oscilloscope settings to those present prior to the autoset
execution.
Examples
AUTOSET EXECUTE vertical, horizontal, and trigger controls of the oscilloscope to
automatically acquire and display all waveforms which are turned on.
AUTOSet:ENAble
Enables or disables the autoset feature. This is useful for classroom purposes
where the instructor wants the students to achieve the desired instrument settings
without the benefit of the autoset feature. This setting is not saved in setupfilesor
SET? or *LRN? queries. The default state is 1 (autoset enabled).
Group
Miscellaneous
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-149
Commands Listed in Alphabetical Order
Syntax
AUTOSet:ENAbl
e {OFF|ON |0|1}
AUTOSet:ENAble?
Arguments
OFFor0disables autoset.
ON or 1 enables autoset.
Examples
AUTOSET:ENABLE 1 enables the front-panel Autoset button.
AUTOSET:ENABLE? might return AUTOSET:ENABLE 0 indicating that the autoset
feature is disabled.
AUXin? (Query Only)
Returns all Aux Input connector parameters.
Conditions
Available for MSO/DPO4000B series models, 2-channel MDO3000 models, and
MDO4000C models without option SA3 or SA6 only.
Group
Vertical
Syntax
AUXin?
AUXin:PRObe
Returns all information concerning the probe attached to Aux Input connector.
Conditions
Available for MSO/DPO4000B series models, 2-channel MDO3000 models, and
MDO4000C models without option SA3 or SA6 only.
Group
Vertical
Syntax
AUXin:PRObe
AUXin:PRObe?
Examples
AUXIN:PROBE? might return AUXIN:PROBE:ID:TYPE "No Probe
Detected";SERNUMBER "";:AUXIN:PROBE:UNITS "";RESISTANCE
1.0000E+6
giving information about the probe attached to the Aux Input
connector.
2-150 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual