MDO3000 Programmer Manual.pdf - 第203页

Commands Listed in Alphabetical Order Syntax BUS:B<x>:DISp lay:FORMat {BINary|HEXad ecimal|ASCII|MIX ed|MIXED2|BLOCKH EX} BUS:B<x>:DIS play:FORMat? Related Commands BUS:B<x>:TYPe Arguments BINary – All …

100%1 / 1158
Commands Listed in Alphabetical Order
Conditions
This feature re
quires installation of a DPO4AUTO or DPO4AUTOMAX
application module for MDO4000C models, or MDO3AUTO for MDO3000
models.
Group
Bus
Syntax
BUS:B<x>:CAN:STANDard
BUS:B<x>:CAN:STANDard{CAN2X|CANFD} string
BUS:B<x>:CAN:STANDard?
Arguments
CAN2X sets the CAN bus standard to CAN 2.0
CANFD sets the CAN bus standard to CAN FD
Examples
BUS:B1:CAN:STANDard CANFD sets the CAN bus standard to CAN FD.
BUS:B1:CAN:STANDard? might return CAN2X, indicating that the CAN bus
standard is CAN 2.0.
BUS:B<x>:DISplay:FORMat
Specifies the display format for the numerical information in the bus waveform.
The display formats supported depend on the BUS:B<x>:TYPe.
Table 2-51: Supported display formats
Bus type Display format
Audio
BINary | HEXadecimal | AS CII | SIGNEDDECimal
1
CAN BINary | HEXadecimal | MIXed
Ethernet
BINary | HEXadecimal | ASCII | MIXed
FlexRay
BINary | HEXadecimal | MIXed
I
2
C BINary | HEXadecimal
LIN
BINary | HEXadecimal | MiXed
MIL-STD-1553 BINary | HEXadecimal | ASCII|MIXed|BLOCKHEX
Parallel
BINary | HEXadecimal
RS232C BINary | H EXadecimal | ASCII
SPI BINary | HEXadecimal
USB BINary | HEXadecimal | MIXed | MIXED2
1
SIGNEDDECimal is set using the audio application BUS:B<x>:AUDio :DISplay:FORMat command.
Group
Bus
2-172 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
Commands Listed in Alphabetical Order
Syntax
BUS:B<x>:DISp
lay:FORMat
{BINary|HEXadecimal|ASCII|MIXed|MIXED2|BLOCKHEX}
BUS:B<x>:DIS
play:FORMat?
Related Commands
BUS:B<x>:TYPe
Arguments
BINary – All values are displayed in binary.
HEXadecimal – All values are displayed in hexadecimal.
ASCII – All values are displayed in an ASCII format, for RS-232 only.
MIXed – Values are displayed in a mixture of hexadecimal, binary, and decimal,
depending on the field.
MIXED2 – Values are displayed in a mixture of hexadecimal, binary, decimal and
ASCII, depending on the field.
BLOCKHEX – Displays the 16-bits of each payload as a block of 4 hexadecimal
digits.
BUS:B<x>:DISplay:TYPe
Specifies the display type for bus. You can set up the bus to display the protocol
information, the logic waveforms that comprise the bus, or both.
Group
Bus
Syntax
BUS:B<x>:DISplay:TYPe {BUS|BOTh}
BUS:B<x>:DISplay:TYPe?
Arguments
BUS displays the bus waveforms only.
BOTh displays both the bus and logic waveforms.
BUS:B<x>:ETHERnet:PRObe
This command specifies the Ethernet probe type: differential or single-ended. The
default is DIFFerential.
B<x> is the bus number 1-4. 1-3 for the MDO4000C and
1-2 for the MDO3000.
Conditions
This command requires a DPO4ENET application module for DPO/MSO4000B
and MDO4000/B/C models.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-173
Commands Listed in Alphabetical Order
Group
Bus
Syntax
BUS:B<x>:ETHERnet:PRObe {DIFFerential|SINGleended}
BUS:B<x>:ETHERnet:PRObe?
Related Commands
BUS:B<x>:ETHERnet:SOUrce:DIFFerential
BUS:B<x>:ETHERnet:SOUrce:DMINus
BUS:B<x>:ETHERnet:SOUrce:DPLUs
Arguments
DIFFerential
SINGleended
Examples
BUS:B1:ETHERnet:PRObe DIFFerential specifies that
a differential probe is connected to the input channels
specified by
BUS:B<x>:ETHERnet:SOUrce:DPLUs and
BUS:B<x>:ETHERnet:SOUrce:DMINus.
BUS:B1:ETHERnet:PRObe?
might return SINGL EENDED, indicating that the
probe type has been set to single-ended.
BUS:B<x>:ETHERnet:PROTOcol
Use this command to set the Ethernet protocol type to TCP/IPv4, or to OTHER.
The default is IPV4.
NOTE. The commands TRIGger:A:BUS:B<x>:ETHERnet:CONDition DATa and
SEARCH:SEARCH<x
>:TRIGger:A:BUS:B<x>:ETHERnet:CONDition DATa
are impacted by the setting of this command.
Conditions
This command req
uires a DPO4ENET application module for DPO/MSO4000B
and MDO4000/B/C models.
Group
Bus
Syntax
BUS:B<x>:ETHERnet:PROTOcol {IPv4|OTHER}
BUS:B<x>:ETHERnet:PROTOcol?
Related Commands
TRIGger:A:BUS:B<x>:ETHERnet:CONDition
2-174 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual