MDO3000 Programmer Manual.pdf - 第275页

Commands Listed in Alphabetical Order (See page 2-61, Se ar ch Command Gr oup .) Returns <NR1> = 1 if the CAN bus feature is present. <NR1> = 0 if the CAN bus feature is not present. CONFIGuration:BUSW A VEFO…

100%1 / 1158
Commands Listed in Alphabetical Order
Returns
<NR1> = 1 if the A
RINC429 bus feature is present.
<NR1> = 0 if the ARINC429 bus feature is not present.
CONFIGuration:BUSWAVEFORMS:AUDIO? (Query Only)
This query returns a boolean value to indicate whether the optio
nal audio bus
triggering and analysis feature is present.
Conditions
This feature requires installation of a DPO4AUDIO applicati
on module, or
MDO3AUDIO for MDO3000 models.
Group
Configuration
Syntax
CONFIGuration:BUSWAVEFORMS:AUDIO?
Related Commands
(See page 2-15, Bus Command Group.)
(See page 2-76, Trigger Command Group.)
(See page 2-61, Search Command Group.)
Returns
<NR1> =1iftheaudiobusfeatureispresent.
<NR1> = 0 if the audio bus featu
re is not present.
CONFIGuration:BUSWAVEFORMS:CAN? (Query Only)
This query returns a boolean value to indicate whether the optional CAN bus
triggering and analysis feature is present.
Conditions
This feature requires installation of a DPO4AUTO application module, or
MDO3AUTO for MDO3000 models.
Group
Configuration
Syntax
CONFIGuration:BUSWAVEFORMS:CAN?
Related Commands
(See page 2-15, Bus Command Group.)
(See page 2-76, Trigger Command Group.)
2-244 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
Commands Listed in Alphabetical Order
(See page 2-61, Se
arch Command Group.)
Returns
<NR1> = 1 if the CAN bus feature is present.
<NR1> = 0 if the CAN bus feature is not present.
CONFIGuration:BUSWAVEFORMS:CANFD? (Query Only)
This query returns a Boolean value to indicate whether the optional CAN FD bus
triggering and analysis feature is present.
Conditions
This feature requires installation of a DPO4AUTO or DPO4AUTOMAX
application module for MDO4000C models, or MDO3AUTO for MDO3000
models.
Group
Configuration
Syntax
CONFIGuration:BUSWAVEFORMS:CANFD?
Related Commands
(See page 2-15, Bus Command Group.)
(See page 2-76, Trigger Command Group.)
(See page 2-61, Search Command Group.)
Returns
<NR1>: = 1 if the CAN FD bus feature is present.
<NR1>: = 0 if the CAN FD bus fe
ature is not present.
CONFIGuration:BUSWAVEFORMS:ETHERNET? (Query Only)
This query returns a boolean value to indicate whether the optional Ethernet
triggering and analysis feature is present. (Enabling this feature on MDO4000/B/C
and MSO/DPO4000B requires installation of a DPO4ENET application module.)
Group
Configuration
Syntax
CONFIGuration:BUSWAVEFORMS:ETHERNET?
Related Commands
(See page 2-15, Bus Command Group.)
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-245
Commands Listed in Alphabetical Order
(See page 2-76, Tr
igger Command Group.)
(See page 2-61, Search Command Group.)
Returns
<NR1> = 1 if the Ethernet feature is present.
<NR1> = 0 if the Ethernet feature is not present.
CONFIGuration:BUSWAVEFORMS:FLEXRAY? (Query Only)
This query returns a boolean value to indicate whether the optional FlexRay bus
triggering and analysis feature is present.
Conditions
This command requires a DPO4AUTOMAX application module for
DPO/MSO4000B and MDO4000/B/C models or an MDO3FLEX application
module for MDO3000 models.
Group
Configuration
Syntax
CONFIGuration:BUSWAVEFORMS:FLEXRAY?
Related Commands
(See page 2-15, Bus Command Group.)
(See page 2-76, Trigger Command Group.)
(See page 2-61, Search Command Group.)
Returns
<NR1> = 1 if the FlexRay bus feature is present.
<NR1> = 0 if the FlexRay bus feature is not present.
CONFIGuration:BUSWAVEFORMS:I2C? (Query Only)
This query returns a boolean value to indicate whether the optional I
2
C bus
triggering and analysis feature is present.
Conditions
This feature requires installation of a DPO4EMBD application module, or
MDO3EMBD for MDO3000 models.
Group
Configuration
2-246 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual