MDO3000 Programmer Manual.pdf - 第284页

Commands Listed in A lphabetical Order CONFIGuratio n:NUMMEAS? (Query Only) This query returns the m aximum number of periodic measurements. Group Configuration Syntax CONFIGuration :NUMMEAS? Related Commands (See page 2-…

100%1 / 1158
Commands Listed in Alphabetical Order
Syntax
CONFIGuration
:EXTVIDEO?
Related Commands
(See page 2-76, Trigger Command Group.)
Returns
<NR1> = 1 if the extended video trigger features are present.
<NR1> = 0 if the extended video trigger features are not present.
CONFIGuration:HISTOGRAM? (Query Only)
This query returns a boolean value to indicate whether the waveform histogram
featureispresent.
Group
Configuration
Syntax
CONFIGuration:HISTOGRAM?
Related Commands
(See page 2-29, Histogram Command Group.)
Returns
<NR1> = 1 if the histogram feature is present.
<NR1> = 0 if the histogram feature is not present.
CONFIGuration:NETWORKDRIVES? (Query Only)
This query returns a boolean value to indicate whether network drives are
supported.
Group
Configuration
Syntax
CONFIGuration:NETWORKDRIVES?
Related Commands
(See page 2-27, File System Command Group.)
Returns
<NR1> = 1 if network drives are supported.
<NR1> = 0 if network drives are not supported.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-253
Commands Listed in Alphabetical Order
CONFIGuratio
n:NUMMEAS? (Query Only)
This query returns the maximum number of periodic measurements.
Group
Configuration
Syntax
CONFIGuration:NUMMEAS?
Related Commands
(See page 2-36, Measurement Command Group.)
Returns
<NR1>
CONFIGuration:REFS:NUMREFS? (Query Only)
This query returns the number of reference waveforms.
Group
Configuration
Syntax
CONFIGuration:REFS:NUMREFS?
Related Commands
(See page 2-9
1
,
Vertical Command Group.)
Returns
<NR1>
CONFIGuration:RF:ADVTRIG? (Query Only)
This query returns a boolean value to indicate whether the advanced RF trigger
and analysis feature is present. (Enabling this feature requires an MDO4000/B/C
Series oscilloscope and installation of a MDO4TRIG application module.)
Group
Configuration
Syntax
CONFIGuration:RF:ADVTRIG?
Related Commands
(See page 2-47, RF Command Group .)
2-254 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
Commands Listed in Alphabetical Order
Returns
<NR1> = 1 if the a
dvanced RF feature is present.
<NR1> = 0 if the advanced RF feature is not present.
CONFIGuration:RF:BANDWidth? (Query Only)
This query returns the bandwidth, in Hz, for the RF channel(s). If there are no
RF channels, the value returned is 0.
Group
Configuration
Syntax
CONFIGuration:RF:BANDWidth?
Returns
Floating point number that represents the bandwidth, in Hz, for the RF channel.
CONFIGuration:RF:MAXBANDWidth? (Query Only)
This query returns the maximum bandwidth, in hertz, for RF channels. If no
RF channels are present, the query returns 0. Enabling this feature requires an
MDO4000/B/C Series oscilloscope and installation of a MDO4TRIG application
module.
Group
Configuration
Syntax
CONFIGuration:RF:MAXBANDWidth?
Related Commands
(See page 2-47, RF Command Group .)
Returns
<NR3>, which is a floating point number that represents the maxi
mum RF
bandwidth, in hertz.
CONFIGuration:RF:NUMCHANnels? (Query Only)
This query returns the number of RF channels present. If no RF channels are
present, the query returns 0. )
Group
Configuration
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-255