MDO3000 Programmer Manual.pdf - 第298页

Commands Listed in A lphabetical Order Syntax CURSor:XY:RAT IO:DELta? CURSor:XY :RA TIO:POSITION<x>? (Query Only) Returns the X (horizontal) or Y (vertical) position for the specified curso r, w h i c h can be 1 (X)…

100%1 / 1158
Commands Listed in Alphabetical Order
Group
Cursor
Syntax
CURSor:XY:POLar:THETA:UNIts?
CURSor:XY:PRODUCT:DELta? (Query Only)
Returns the difference between the cursors X position and cursor Y position. The
ΔX × ΔY value is calculated as (X2 - X1) × (Y2 - Y1).
Group
Cursor
Syntax
CURSor:XY:PRODUCT:DELta?
CURSor:XY:PRODUCT:POSITION<x>? (Query Only)
Returns the position of the X or Y cursor used to calculate the X × Y cursor
measurement, Position 1 = (X1 × Y1); Position 2 = (X2 × Y2). The cursor is
specified by x, which can be 1 or 2.
Group
Cursor
Syntax
CURSor:XY:PRODUCT:POSITION<x>?
CURSor:XY:PRODUCT:UNIts? (Query Only)
Returns the XY cursor product units.
Group
Cursor
Syntax
CURSor:XY:PRODUCT:UNIts?
CURSor:XY:RATIO:DELta? (Query Only)
Returns the ratio of the difference between the cursors X position and cursor Y
position (ΔY¸ ΔX). The ratio is calculated as (Y2 - Y1) / (X2 - X1).
Group
Cursor
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-267
Commands Listed in Alphabetical Order
Syntax
CURSor:XY:RAT
IO:DELta?
CURSor:XY:RATIO:POSITION<x>? (Query Only)
Returns the X (horizontal) or Y (vertical) position for the specified cursor, which
can be 1 (X) or 2 (Y). The ratio is calculated as Position 1 = (Y1/X1); Position
2 = (Y2/X2).
Group
Cursor
Syntax
CURSo
r:XY:RATIO:POSITION<x>?
CURSor:XY:RATIO:UNIts? (Query Only)
Returns the cursor X and cursor Y units for the ratio measurement.
Group
Cursor
Syntax
CURSor:XY:RATIO:UNIts?
CURSor:XY:READOUT
This command specifies the XY cursor re
adout selection.
Group
Cursor
Syntax
CURSor:XY:READOUT {RECTangular|POLARCord|PRODuct|RATio}
CURSor:XY:READOUT?
Arguments
RECTangular specifies the XY readout as recta
ngular coordinates.
POLARCord specifies the XY readout as polar coordinates.
PRODuct specifies the XY readout in X*Y format.
RATio specifies the XY readout in X:Y format.
2-268 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
Commands Listed in Alphabetical Order
CURSor:XY:RE
CTangular:X:DELta? (Query Only)
Returns the cursor X delta value in rectangular coordinates.
Group
Cursor
Syntax
CURSor:XY:RECTangular:X:DELta?
CURSor:XY:RECTangular:X:POSITION<x>
This command specifies the X rectangular coordinate for cursor 1 or cursor 2.The
cursor is specified by x and can be either 1 or 2.
Group
Cursor
Syntax
CURSor:XY:RECTangular:X:POSITION<x> <NR3>
CURSor:XY:RECTangular:X:POSITION<x>?
Arguments
<NR3> is a floating point number that specifies the coordin
ate in volts.
CURSor:XY:RECTangular:X:UNIts? (Query Only)
Returns the cursor X rectangular units.
Group
Cursor
Syntax
CURSor:XY:RECTangular:X:UNIts?
CURSor:XY:RECTangular:Y:DELta? (Query Only)
Returns The cursor Y delta value in rectangular coordinates.
Group
Cursor
Syntax
CURSor:XY:RECTangular:Y:DELta?
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-269