MDO3000 Programmer Manual.pdf - 第321页

Commands Listed in Alphabetical Order GRId specifies a frame and grid only . SOLid specifies a solid graticule. Examples DISPLAY:GRATI CULE FRAme sets the graticule type to display the frame only . DISPLAY:GRATI CULE? migh…

100%1 / 1158
Commands Listed in Alphabetical Order
Syntax
DISplay:DIGit
al:ACTIVity {0|1|OFF|ON}
DISplay:DIGital:ACTIVity?
Arguments
1 or ON turns on the digital channel activity monitor display.
0 or OFF turns it off.
Examples
DIS:DIG:ACTIV ON turns on the digital channel activity monitor.
DISplay:DIGital:HEIght
This command specifies the number of available digital waveform position slots.
NOTE. If the number of live digital channels exceeds the number of slots, their
height is reduced to a smaller size, allowing all digital channels to be displayed.
Group
Display
Syntax
DISplay:DIGital:HEIght {SMAll|MEDium|LARge}
DISplay:DIGital:HEIght?
Arguments
SMAll sets the height to display 4 digital waveforms per division.
MEDium sets the height to display 2 digital waveforms per division.
LARge sets the height to display 1 digital waveform per division.
DISplay:GRAticule
This command specifies the type of graticule the oscilloscope displays.
Group
Display
Syntax
DISplay:GRAticule {CROSSHair|FRAme|FULl|GRId|SOLid}
DISplay:GRAticule?
Arguments
C
ROSSHair
specifies a frame and cross hairs.
FRAme specifies a frame only.
FULl specifies a frame, a grid and cross hairs.
2-290 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
Commands Listed in Alphabetical Order
GRId specifies a
frame and grid only.
SOLid specifies a solid graticule.
Examples
DISPLAY:GRATICULE FRAme sets the graticule type to display the frame only.
DISPLAY:GRATICULE? might return :DISPLAY:GRAT ICULE FULL indicating
that all graticule elements are selected.
DISplay:INTENSITy? (Query Onl
y)
Returns the display intensity settings.
Group
Display
Syntax
DISplay:INTENSITy?
Examples
DISPLAY:INTENSITY? might return: :D ISPLAY:INTEnsITY:WAVEFORM
30;GRATICULE 75;BACKLIG HT HIGH
DISplay:INTENSITy:BACKLight
Sets and returns the waveform backlight intensity settings.
Group
Display
Syntax
DISplay:INTENSITy:BACKLight {LOW|MEDium|HIGH}
DISplay:INTENSITy:BACKLight?
Examples
DISPLAY:INTENSITY:BACKLIGHT? might return
DISPLAY:INTEnsITY:BACKLIGHT HIGH
DISplay:INTENSITy:BACKLight:AUTODim:ENAble
Sets or returns the state of the display auto-dim feature. The default is enabled.
Once the backlight has dimmed, any button push or knob turn returns the backlight
value to the value set by DISplay:INTENSITy:BACKLight.
Group
Display
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-291
Commands Listed in Alphabetical Order
Syntax
DISplay:INTEN
SITy:BACKLight:AUTODim:ENAble {OFF|ON|0|1}
DISplay:INTENSITy:BACKLight:AUTODim:ENAble?
Arguments
OFF or 0 turns off the display auto-dim feature.
ON or 1 turns it on.
DISplay:INTENSITy:BACKLight:AUTODim:TIMe
Sets or returns the amount of time, in minutes, to wait for no UI activity before
automatically dimming the display. The time can range from a minimum of
10 minutes to a maximum of 1440 minutes (24 hours). The default is 60 minutes.
Group
Display
Syntax
DISplay:INTENSITy:BACKLight:AUTODim:TIMe <NR1>
DISplay:INTENSITy:BACKLight:AUTODim:TIMe?
Arguments
An integer that represents the amount of time, in minutes, to wait for no UI
activity before automatically dimming the display.
DISplay:INTENSITy:GRAticule
Sets and ret
urns the display graticule intensity settings.
Group
Display
Syntax
DISplay:INTENSITy:GRAticule <NR1>
DISplay:INTENSITy:GRAticule?
Arguments
<NR1> is the graticule intensity and ranges from 0 t
o100percent.
Examples
DISPLAY:INTENSITY:GRATICULE? might return
DISPLAY:INTEnsITY:GRATICULE 30
DISplay:INTENSITy:WAVEform
Sets and returns the display waveform intensity settings.
2-292 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual