MDO3000 Programmer Manual.pdf - 第339页
Commands Listed in Alphabetical Order ETHERnet:ENE T :ADDress? (Query Only) Returns the Ethernet address value assigned to the oscilloscope. This is a ssigned at the factory and can not be changed. Group Ethernet Syntax …
Commands Listed in Alphabetical Order
NOTE. Do not use
DHCP/BOOTP searching if your oscilloscope has been
assigned a static address on a network. If you set this command to ON, the
DHCP/BOOTP search will delete or change your static IP address information.
OFF disables the oscilloscope to search the network for a DHCP or BOOTP server.
Examples
ETHERNET:DHCPBOOTP ON sets the oscilloscope to search for a DHCP or BOOTP
server and assign a dynamic IP address to the oscilloscope.
ETHERnet:DNS:IPADDress
This command specifies the network Domain Name Server (Dns) IP address.
Group
Ethernet
Syntax
ETHERnet:DNS:IPADDress <QString>
ETHERnet:DNS:IPADDress?
Arguments
<QString> is a standard IP address value, enclosed in quotes.
Examples
ETHERNET:DNS:IPADDRESS “128.196.13.352” sets the Dns IP address that
the oscilloscope uses to communicate with the network.
ETHERnet:DOMAINname
This command specifies the network domain name.
Group
Ethernet
Syntax
ETHERnet:DOMAINname <Qstring>
ETHERnet:DOMAINname?
Arguments
<QString> is the network domain name, enclosed in quotes.
Examples
ETHERNET:DOMAINNAME “Alpha1.Mycorp.com” sets the domain name that
the oscilloscope uses to communicate with the network.
2-308 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
Commands Listed in Alphabetical Order
ETHERnet:ENE
T:ADDress? (Query Only)
Returns the Ethernet address value assigned to the oscilloscope. This is assigned
at the factory and can not be changed.
Group
Ethernet
Syntax
ETHERnet:ENET:ADDress?
Examples
ETHERNET:ENET:ADDRESS? returns an Ethernet address such as
08:00:11:01:02:03
ETHERnet:GATEWay:IPADDress
This command specifies the remote interface gateway IP address.
Group
Ethernet
Syntax
ETHERnet:GATEWay:IPADDress <QString>
ETHERnet:GATEWay:IPADDress?
Related Commands
ETHERnet:NETWORKCONFig, ETHERnet:IPADDress, ETHERnet:
SUBNETMask
Arguments
<QString> is a standard IP address value, enclosed in quotes.
Examples
ETHERNET:GATEWAY:IPADDRESS “128.143.16.1” sets the gateway IP
address.
ETHERnet:HTTPPort
This command specifies the remote interface HTTP port value.
Group
Ethernet
Syntax
ETHERnet:HTTPPort <QString>
ETHERnet:HTTPPort?
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-309
Commands Listed in Alphabetical Order
Arguments
<QString> is an
integer port number, enclosed in quotes.
NOTE. Consider the following if you are using the e*Scope™ control software . If
you don't e nter a port address in the URL, then the
ETHERnet:HTTPPort value
must be set to "80", which is the default port for HTTP protocol. If you use a URL
with a port address (for example: http://DPO4104B-04WKL4:1234), the port
number is specified by the number after the colon. Set the
ETHERnet:HTTPPort
value to thi
s same number.
Examples
ETHERNET:HTTPPORT “80” sets the HTTP port value to 80.
ETHERnet:IPADDress
This comm
and specifies the IP address assigned to the oscilloscope.
Group
Ethernet
Syntax
ETHERnet:IPADDress <QString>
ETHERnet:IPADDress?
Related Commands
ETHERnet:NETWORKCONFig,
ETHERnet:SUBNETMask,
ETHERnet:GATEWay:IPADDress
Arguments
<QString> is a standard IP address value, enclosed in quotes.
Examples
ETHERNET:IPADDRESS “123.121.13.214” sets the oscilloscope's IP address.
ETHERnet:LXI:LAN:PA SSWord:ENABle
This command controls whether LXI (LAN eXtensions for Instrumentation) is
password protected.
Group
Miscellaneous
Syntax
ETHERnet:LXI:LAN:PASSWord:ENABle {0|1|ON|OFF}
ETHERnet:LXI:LAN:PASSWord:ENABle?
2-310 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual