MDO3000 Programmer Manual.pdf - 第344页
Commands Listed in A lphabetical Order Examples ETHERnet:NETW ORKCONFig MANual specifies to configure the Ethernet settings manually . ETHERnet:NET WORKCONFig? might return AUTOMA TIC, indicating the settings are being con…
Commands Listed in Alphabetical Order
Examples
ETHER:LXI:LAN
:STAT?
might return FAULT, indicating the network is not
visible, or the network settings are incorrect.
ETHERnet:NAME
This command specifies the network name assigned to the oscilloscope.
Group
Ethernet
Syntax
ETHERnet:NAME <QString>
ETHERnet:NAME?
Arguments
<QString> is the network name assigned to the oscilloscope, enclosed in quotes.
Examples
ETHERNET:NAME “labscope1” sets the oscilloscope's network name.
ETHERnet:NETWORKCONFig
This command specifies the Ethernet network configuration setting. The default
is automatic.
Group
Miscellaneous
Syntax
ETHERnet:NETWORKCONFig {AUTOmatic|MANual}
ETHERnet:NETWORKCONFig?
Related Commands
ETHERnet:NAME,
ETHERnet:IPADDress,
ETHERnet:SUBNETMask,
ETHERnet:GATEWay:IPADDress,
ETHERnet:DHCPbootp
Arguments
AUTOmatic specifies that the oscilloscope’s IP address, subnet mask and gateway
settings will be received from a DHCP server on the local network.
MANual specifies that the Ethernet settings will be configured
manually, using ETHERnet:IPADDress, ETHERnet:SUBNETMask,and
ETHERnet:GATEWay:IPADDress.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-313
Commands Listed in Alphabetical Order
Examples
ETHERnet:NETW
ORKCONFig MANual
specifies to configure the Ethernet
settings manually.
ETHERnet:NET
WORKCONFig?
might return AUTOMATIC, indicating the
settings are being configured automatically.
ETHERnet:PASSWord
This command specifies the HTTP Ethernet access password. If a password is
set, the user must enter the password before the user's Web browser can access
the oscilloscope.
Group
Ethernet
Syntax
ETHERnet:PASSWord <new>
ETHERnet:PASSWord?
Related Commands
ETHERnet:LXI:LAN:PASSWord:ENABle,
ETHERnet:LXI:LAN:PASSWord:ESCOPEENABle
Arguments
<new> is a new password, enclosed in quotes.
Examples
ETHERNET:PASSWORD ”ZEN53” replaces the current Ethernet password with the
new password ZEN53.
ETHERNET:PASSWORD? might return :ETHERNET:PASSWORD “ZEN53”.
ETHERnet:PING (No Query Form)
Causes the oscilloscope to ping the gateway IP address.
Group
Ethernet
Syntax
ETHERnet:PING EXECute
Examples
ETHERNET:PING EXECUTE causes the oscilloscope to ping the gateway IP
address.
2-314 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
Commands Listed in Alphabetical Order
ETHERnet:PIN
G:STATus? (Query Only)
Returns the results from sending the ETHERnet:PING command to ping the
gateway IP address.
Group
Ethernet
Syntax
ETHERnet:PING:STATus?
Returns
OK is returned if the computer at the gateway IP address answers.
NORESPOnsE is returned if the computer at the gateway IP address does not
answer.
INPROGRESS is returned if the ping operation is still executing.
NEVER is returned if ETHERne t:PING EXECute has not been previously
sent, indicating that no ping response has ever been received in response toan
ETHERnet:PING EXECute command since the instrument was powered on.
ETHERnet:SUBNETMask
This command specifies the remote interface subnet mask value.
Group
Ethernet
Syntax
ETHERnet:SUBNETMask <QString>
ETHERnet:SUBNETMask?
Related Commands
ETHERnet:NETWORKCONFig,
ETHERnet:IPADDress,
ETHERnet:GATEWay:IPADDress
Arguments
<QString> is the subnet mask value, enclosed in quotes.
Examples
ETHERNET:SUBNETMASK “255.255.255.0” sets the subnet mask value using
standard IP address notation format.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-315