MDO3000 Programmer Manual.pdf - 第51页

Command Groups T able 2-20: Con ﬁ guration Commands (cont.) Command Description CONFIGuration:ANALOg:GNDCPLG? This query returns a boolean value to indicate whether the instrument supports the ground coupling feature for…

Command Groups

Table 2-19: Calibration and Diagnostic Commands (cont.)

Command

Description

CALibrate:RESults:FACtory:SCOPE? This query returns the factory calibration status for the oscilloscope (doesn't include RF or

AFG) of the instrument.

CALibrate:RESults:SPC? Returns the results of the last SPC operation.

CALibrate:RESults:SPC:RF? This query returns the status of the last SPC run for the RF portion of the

instrument (doesn't include analog channels) . This query is synonymous with

CALibrate:INTERNal:STATus:RF?

Available on mixed domain oscilloscope models with RF enabled.

CALibrate:RESults:SPC:SCOPE? This query returns the status of the last SPC run for the oscilloscope portion of

the instrument (doesn't include the RF portion). This query is synonymous to

CALibrate:INTERNal:STATus:SCOPE?

CALibrate:RF

This command begins the RF calibration process.

Available on mixed domain oscilloscope models with RF enabled.

CALibrate:RF:STARt

This command is identical to

CALIBRATE:RF.

Available on mixed domain oscilloscope models with RF enabled.

CALibrate:RF:STATus? This query returns the status of the last RF calibration.

Available on mixed domain oscilloscope models with RF enabled.

DIAg:LOOP:OPTion Sets the self-test loop option.

DIAg:LOOP:OPTion:NTIMes Sets the self-test loop option to r un N times.

DIAg:LOOP:STOP Stops the self-test at the end of the current loop.

DIAg:RESUlt:FLAg? Returns the pass/fail status from the last self-test sequence execution.

DIAg:RESUlt:LOG? Returns the internal results log from the last self-test sequence execution.

DIAg:SELect Runs self tests on the speciﬁed system subsystem.

DIAg:SELect:<function> Speciﬁes which of the subsystems will be tested when the DIAg:STATE EXECute

command is run.

DIAg:STATE S ets the oscilloscope operating state.

Conﬁguration Command Group

Use the queries in the Conﬁguration Command Group to determine whether a

particular feature is present.

Table 2-20: Conﬁguration Commands

Command

Description

CONFIGuration:ADVMATH?

This query returns a boolean value to indicate whether the

instrument supports the advanced math feature.

CONFIGuration:AFG? Indicates whether or not the arbitrary function generator

hardware is present, and the arbitrary function generation feature

is enabled.

CONFIGuration:ANALOg:BANDWidth? This query returns the maximum bandwidth for analog channels.

2-20 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual

Command Groups

Table 2-20: Conﬁguration Commands (cont.)

Command

Description

CONFIGuration:ANALOg:GNDCPLG?

This query returns a boolean value to indicate whether the

instrument supports the ground coupling feature for analog

channels. As this feature is not supported on M SO /DPO4000B

or MDO4000/B/C models, this query always returns 0.

CONFIGuration:ANALOg:MAXBANDWidth? Returns the maximum bandwidth for analog channels.

CONFIGuration:ANALOg:MAXSAMPLERate? This query returns the m aximum sample rate for analog channels.

CONFIGuration:ANALOg:NUMCHANnels? This query returns the number of analog channels.

CONFIGuration:ANALOg:RECLENS? This query returns a list of supported record lengths for analog

channels.

CONFIGuration:ANALOg:VERTINVert?

This query returns a boolean value to indicate whether the

instrument supports the vertical invert feature for analog

channels.

CONFIGuration:APPLications:CUSTOMMask? Indicates whether the Custom Mask test feature is present and

enabled.

CONFIGuration:APPLications:LIMITMask?

This query returns a boolean value to indicate whether the

instrument supports the mask/limit test application feature.

CONFIGuration:APPLications:POWer?

This query returns a boolean value to indicate whether the

optional power application feature is present.

CONFIGuration:APPLications:STANDARDMask? Indicates whether the Standard Mask test feature is present

and enabled.

CONFIGuration:APPLications:VIDPIC? Indicates whether the Video Picture feature is present and

enabled.

CONFIGuration:ARB? Indicates whether or not the arbitrary function generator

hardware is present, and the user-deﬁned arbitrary waveform

generation feature is enabled. Note that this is different than the

CONFIGuration:AFG? query.

CONFIGuration:AUXIN?

This query returns a boolean value to indicate whether the

instrument has an Aux Input connector.

CONFIGuration:BUSWAVEFORMS:ARINC429A?

This query returns a boolean value to indicate whether the

optional ARINC429 bus triggering and analysis feature is present.

CONFIGuration:BUSWAVEFORMS:AUDIO?

This query returns a boolean value to indicate whether the

optional audio bus triggering and analysis feature is present.

CONFIGuration:BUSWAVEFORMS:CAN?

This query returns a boolean value to indicate whether the

optional CAN bus triggering and analysis feature is present.

CONFIGuration:BUSWAVEFORMS:CANFD?

This query returns a boolean value to indicate whether the

optional CAN FD bus triggering and analysis feature is present.

CONFIGuration:BUSWAVEFORMS:ETHERNET?

This query returns a boolean value to indicate whether the

optional Ethernet triggering and analysis feature is present.

CONFIGuration:BUSWAVEFORMS:FLEXRAY?

This query returns a boolean value to indicate whether the

optional FlexRay bus triggering and analysis feature is present.

CONFIGuration:BUSWAVEFORMS:I2C?

This query returns a boolean value to indicate whether the

optional I

C bus triggering and analysis feature is present.

MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-21

Command Groups

Table 2-20: Conﬁguration Commands (cont.)

Command

Description

CONFIGuration:BUSWAVEFORMS:LIN?

This query returns a boolean value to indicate whether the

optional LIN bus triggering and analysis feature is present.

CONFIGuration:BUSWAVEFORMS:MIL1553B?

This query returns a boolean value to indicate whether the

optional MIL-S TD-1553 bus triggering and analysis feature is

present.

CONFIGuration:BUSWAVEFORMS:NUMBUS? This query returns the number of bus waveforms.

CONFIGuration:BUSWAVEFORMS:PA Rallel?

This query returns a boolean value to indicate whether the

parallel bus triggering and analysis feature is present.

CONFIGuration:BUSWAVEFORMS:RS232C?

This query returns a boolean value to indicate whether the

optional RS232 bus triggering and analysis feature is present.

CONFIGuration:BUSWAVEFORMS:SPI?

This query returns a boolean value to indicate whether the

optional SPI bus triggering and analysis feature is present.

CONFIGuration:BUSWAVEFORMS:USB? This query returns a boolean value to indicate whether the USB

bus triggering and analysis feature is present.

CONFIGuration:BUSWAVEFORMS:USB:HS?

This query returns a boolean value to indicate whether the

high-speed USB bus triggering and analysis feature is present.

CONFIGuration:DIGITAl:MAGnivu?

This query returns a boolean value to indicate whether the

instrument supports the MagniVu feature for digital channels. If

there are no digital channels, the value returned is 0.

CONFIGuration:DIGITAl:MAXSAMPLERate? This query returns the maximum sample rate for digital channels,

in samples per second.

CONFIGuration:DIGITAl:NUMCHANnels? This query returns the number of digital channels.

CONFIGuration:DVM?

Indicates whether the Digital Voltmeter hardware is present. and

the DVM feature is enabled.

CONFIGuration:EXTVIDEO?

This query returns a boolean value to indicate whether the

optional extended video trigger features are present.

CONFIGuration:HISTOGRAM?

This query returns a boolean value to indicate whether the

waveform histogram feature is present.

CONFIGuration:NETWORKDRIVES?

This query returns a boolean value to indicate whether network

drives are present.

CONFIGuration:NUMMEAS? This query returns the number of periodic measurements.

CONFIGuration:REFS:NUMREFS? This query returns the number of reference waveforms.

CONFIGuration:RF:ADVTRIG?

This query returns a boolean value to indicate whether the

advanced RF trigger and analysis feature is present.

CONFIGuration:RF:BANDWidth? This query returns the maximum bandwidth, in hertz, for RF

channels. If there are no RF channels, the value returned is 0.

CONFIGuration:RF:MAXBANDWidth? Returns the maximum bandwidth, in hertz, for RF channels.

CONFIGuration:RF:NUMCHANnels? This query returns the number of RF channels present.

CONFIGuration:ROSC?

This query returns a boolean value to indicate whether the

instrument has an external reference oscillator ( RO SC) input.

2-22 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual