MDO3000 Programmer Manual.pdf - 第538页

Commands Listed in A lphabetical Order Examples POWER:SOA:LIN EAR:XMAX 700 sets the XMAX value to 700.0000. POWER:SOA:LIN EAR:XMAX ? might return :POWER:SOA:LIN ear: XMAX 500.0000 indi cating that the XMAX value for line…

100%1 / 1158
Commands Listed in Alphabetical Order
POWer:RIPPle
:SOUrce
This command specifies the source waveform for ripple tests. The voltage source
waveform is specified using the POWer:VOLTAGESOurce command and the
current wave
form is specified using the POWer:CURRENTSOurce command.
Conditions
This command requires a DPO4PWR application module for 4000 series models,
or an MDO3PWR application module for MDO3000 series models.
Group
Power
Syntax
POWer:RIPPle:SOUrce {VOLTage|CURRent}
Arguments
VOLTage specifies voltage source waveform for ripple tests.
CURRent specifies current source waveform for ripple tests.
Examples
POWER:RIPPLE:SOURCE CURRent sets the ripple source to Current.
POWER:RIPPLE:SOURCE? might return :POWER:RIPPLE:SOURCE VOLT
indicating that the ripple source is set to Voltage.
POWer:SOA:LINear:XMAX
This command specifies the user XMAX value for use in linear SOA calculations.
Conditions
This command requires a DPO4PWR application module for 4000 series models,
or an MDO3PWR application module for MDO3000 series models.
Group
Power
Syntax
POWer:SOA:LINear:XMAX <NR3>
POWer:SOA:LINear:XMAX?
Arguments
<NR3> is a floating point number that specifies the XMAX value used for linear
SOA calculations.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-507
Commands Listed in Alphabetical Order
Examples
POWER:SOA:LIN
EAR:XMAX 700
sets the XMAX value to 700.0000.
POWER:SOA:LINEAR:XMAX ? might return :POWER:SOA:LIN ear:XMAX
500.0000
indi
cating that the XMAX value for linear plot type is set to 500.0000.
POWer:SOA:LINear:XMIN
This command specifies the user XMIN value for use in linear SOA calculations.
Conditions
This command requires a DPO4PWR application module for 4000 series models,
or an MDO3PWR application module for MDO3000 series models.
Group
Power
Syntax
POWer:SOA:LINear:XMIN <NR3>
POWer:SOA:LINear:XMIN?
Arguments
<NR3> is a floating point numb
er that specifies the XMIN value used for linear
SOA calculations.
Examples
POWER:SOA:LINEAR:XMIN 2 sets the XMIN value to 2.0000.
POWER:SOA:LINEAR:XMIN ? might return :POWER:SOA:LIN ear:XMIN
0.0E+0
indicating that the XMIN value for linear plot type is set to 0.0E+0.
POWer:SOA:LINear:YMAX
This command specifies the user YMAX value for use in linear SOA calculations.
Conditions
This command requires a DPO4PWR application module for 4000 series models,
or an MDO3PWR applic
ation module for MDO3000 series models.
Group
Power
Syntax
POWer:SOA:LINear:YMAX <NR3>
POWer:SOA:LINear:YMAX?
Arguments
<NR3> is a floating point number that specifies the YMAX value used for linear
SOA calculations.
2-508 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
Commands Listed in Alphabetical Order
Examples
POWER:SOA:LIN
EAR:YMAX 700
sets the YMAX value to 700.0000.
POWER:SOA:LINEAR:YMAX ? might return :POWER:SOA:LINe ar:YMAX
50.0000
indic
ating that the YMAX value for linear plot type is set to 50.0000.
POWer:SOA:LINear:YMIN
This command specifies the user YMIN value for use in linear SOA calculations.
Conditions
This command requires a DPO4PWR application module for 4000 series models,
or an MDO3PWR application module for MDO3000 series models.
Group
Power
Syntax
POWer:SOA:LINear:YMIN <NR3>
POWer:SOA:LINear:YMIN?
Arguments
<NR3> is a floating point numb
er that specifies the YMIN value used for linear
SOA calculations.
Examples
POWER:SOA:LINEAR:YMIN 2 sets the YMIN value to 2.0000.
POWER:SOA:LINEAR:YMIN ? might return :POWER:SOA:LINe ar:YMIN
0.0E+0
indicating that the YMIN value for linear plot type is set to 0.0E+0.
POWer:SOA:LOG:XMAX
This command specifies the user XMAX value for use in Log SOA calculations.
Conditions
This command requires a DPO4PWR application module for 4000 series models,
or an MDO3PWR applic
ation module for MDO3000 series models.
Group
Power
Syntax
POWer:SOA:LOG:XMAX <NR3>
POWer:SOA:LOG:XMAX?
Arguments
<NR3> is a floating point number that specifies the XMAX value used for log
SOA calculations.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-509