MDO3000 Programmer Manual.pdf - 第624页
Commands Listed in A lphabetical Order SA V e:ASSIgn: TYPe This command specifies the assignment of the data to be saved when the front-panel Save button is pressed. Group Save and Recall Syntax SAVe:ASSIgn:T YPe {IMAGe|W…
Commands Listed in Alphabetical Order
Group
Status and Erro
r
Syntax
*RST
Related Commands
FACtory,
RECAll:SETUp,
SAVe:SETUp,
*PSC,
*RCL,
*SAV
Arguments
None
Examples
*RST resets the oscilloscope settings to factory defaults.
*SAV (No Query Form)
Stores the state of the oscilloscope to a specified memory location. You can use
the *RCL command to restore the oscilloscope to this saved state at a later time.
Group
Save and Recall
Syntax
*SAV <N R1>
Related Commands
*RCL, RECAll:SETUp,
SAVe:SETUp
Arguments
<NR1> specifies a location in which to save the state of the oscilloscope. Location
values range from 1 through 10. Using an out-of-range location value causesan
execution error. Any settings that have been stored previously at this location
will be overwritten.
Examples
*SAV 2 saves the current oscilloscope state in memory location 2.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-593
Commands Listed in Alphabetical Order
SAVe:ASSIgn:
TYPe
This command specifies the assignment of the data to be saved when the
front-panel Save button is pressed.
Group
Save and Recall
Syntax
SAVe:ASSIgn:TYPe {IMAGe|WAVEform|SETUp}
SAVe:ASSIgn:TYPe?
Arguments
IMAGe assigns the Save button to save screen images.
WAVEform assigns the Save button to save waveforms.
SETUp assigns the Save button to save setups.
SAVe:EVENTtable:{BUS<x>|B<x>} (No Query Form)
Saves the data from bus<x> to a specified file and location; where x is the bus
number (1-4). 1-3 for the MDO4000C and 1-2 for the MDO3000.
NOTE. External filestructureisasfollows:
E: is the USB memory device plugged into the first USB port o n the front of the
oscilloscope.
F: is the USB memory device plugged into the second USB port on the front of
the oscilloscope.
G: and H: are the USB memory device plugged into the USB ports on the rear o f
the oscilloscope.
I: is the network storage.
However, the MDO3000 only has two ports. E: is on the front and F: is on the rear.
Group
Save and Recall
Syntax
SAVe:EVENTtable:{BUS<x>|B<x>} <file path>
Arguments
<file p ath> is a quoted string that defines the file name and path location
where the event table will be stored.
2-594 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
Commands Listed in Alphabetical Order
NOTE. <filename
> stands for a filename of up to 125 characters, followed by a
period (".") and the three-character extension. Waveform files should have a .csv
extension for comma-separated spreadsheet format files.
SAVe:IMAGe (No Query Form)
Saves a capt
ure of the screen image to the specified file. Supported image
formats are PNG, Windows Bitmap, and TIFF. The file format is specified by the
SAVe:IMAGe:FILEFormat command. The SAVe:IMAGe:INKSaver command
determines whether the data is saved in InkSaver mode.
NOTE. The external fi le structure is as follows:
E: is the USB memory device plugged into the first USB port on the front of the
oscilloscope.
F: is the USB memory device plugged into the second USB port on the front of the
oscilloscope. (Not available for MDO3000.)
G: and H: are the USB memory device plugged into the USB ports on the rear of
the oscilloscope. (Not available for MDO3000 models.)
I: is the network storage.
Group
Save and Recall
Syntax
SAVe:IMAGe <file path>
Related Commands
SAVe:ASSIgn:TYPe
Arguments
<file p ath> is a filename, including path, where the image will be saved. If you
do not specify a directory, the oscilloscope will store the file in the current working
directory. File name extensions are not required but are highly recommended.
SAVe:IMAGe:FILEFormat
This command specifies the file format to use for saving screen images.
NOTE. The file format is not automatically determined by the file name extension.
Youneedtochooseafile format with an extension which is consistent with the
selected fi le format.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-595