MDO3000 Programmer Manual.pdf - 第672页

Commands Listed in A lphabetical Order t o s e a r c ho nt ot he hexadecimal value XX08, assuming the qualifier is set to LESSthan, MOREthan, EQual, UNEQ ual, LESSEQu al or MOREEQual. SEARCH:SEARC H1:TRIGger:A: BUS:B1:ETH…

100%1 / 1158
Commands Listed in Alphabetical Order
Examples
SEARCH:SEARCH
1:TRIGger:A:BUS:B1:ETHERnet:MAC:
ADDRess:DESTination:VALue
”XXXXXXXXXX01010111111100000001111010101010101000” would set the
MAC destination address to search for to XX:35:FC:07:AA:C8 hex.
SEARCH:SEARCH1:TRIGger:A:BUS:B1:ETHERnet:MAC:ADDRess:
DESTination:VALue?
might return ”XXXXXXXXXX010101111111000
00001111010101010101000”.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ETHERnet:MAC{:LENgth|:TYPe}:VALue
When the E
thernet search condition is set to
MACLENgth,andthe
qualifier is set to
LESSthan, MOREthan, EQual, UNEQual,
LESSEQual
or MOREEQual, this command specifies the 16–bit value
to search for. When the qualifier is set to
INrange or OUTrange,this
command specifies the lower limit of the range. (Use the command
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ETHERnet:MAC{:LENgth|
:TYPe}
:HIVALue
to set the upper limit of the range.) The default is all X’s
(don’t care).
SEARCH<x> is the search number, which is always 1, and B<x> is
the bus number B1-B4.
Conditions
This command requires a DPO4ENET application module for DPO/MSO4000B
and MDO4000/B/C models.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ETHERnet:MAC{:LENgth|:
TYPe}:VALue <QString>
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ETHERnet:MAC{:LENgth|:
TYPe}:VALue?
Related Commands
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ETHERnet:CONDition
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ETHERnet:MAC{:LENgth|:
TYPe}:?HIVALue
Arguments
QString is a quoted string of up to 16 characters where the allowable characters
are 0, 1, and X. The bits specified in the quoted string replace the least significant
bits, leaving any unspecified upper bits unchanged.
Examples
SEARCH:SEARCH1:TRIGger:A:BUS:B1:ETHERnet:MAC{:LENgth|
:TYPe}:VALue “XXXXXXXX0 0001000”
sets the MAC length/type value
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-641
Commands Listed in Alphabetical Order
tosearchontot
he hexadecimal value XX08, assuming the qualifier is set to
LESSthan, MOREthan, EQual, UNEQual, LESSEQual or MOREEQual.
SEARCH:SEARC
H1:TRIGger:A:BUS:B1:ETHERnet:MAC{:LENgth|
:TYPe}:VALue “XXXXXXXX 00001000”
sets the lower limit of the range to the
hexadecimal value XX08, assuming the qualifier is set to
INrange or OUTrange.
SEARCH:SEA
RCH<x>:TRIGger:A:BUS:B<x>:ETHERnet:MAC{:LENgth|:TYPe}:?HIVALue
When the Ethernet search condition is set to MACLENgth,andthe
qualifier is set to either
INrange or OUTrange, this command
specifies
the upper data value of this range. (Use the command
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ETHERnet:
MAC{:LENgth|:TYPe}:VALue
to set the lower limit of the range.)
The default is all X’s (don’t care).
SEARCH<x> is the search number, which is
always 1, and
B<x> is the bus number B1-B4.
Conditions
This command requires a DPO4ENET application module for DPO/MSO4000B
and MDO4000/B/C models.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ETHERnet:MAC{:LENgth|:
TYPe}:?HIVALue <QString>
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ETHERnet:MAC{:LENgth|:
TYPe}:?HIVALue?
Related Commands
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ETHERnet:CONDition
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ETHERnet:MAC{:LENgth|:
TYPe}:VALue
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ETHERnet:QUALifier
Arguments
QString is a quoted string of up to 16 characters where the allowable characters
are 0, 1, and X. The bits specified in the quoted string replace the least significant
bits, leaving any unspecified upper bits unchanged.
Examples
SEARCH:SEARCH1:TRIGger:A:BUS:B1:ETHERnet:MAC{:LENgth| :TYPe}
:HIVALue
“XXXXXXXX00001000” sets the upper limit of the range to the
hexadecimal value XX08 (when the search condition is set to
MACLENgth,and
the qualifier is set to
INrange or OUTr
ange).
2-642 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
Commands Listed in Alphabetical Order
SEARCH:SEARCH
1:TRIGGER:A:BUS:B1:ETHERNET:MAC{:LENGTH|
:TYPE}:HIVALUE?
might return “XXXXXXXX00001000”.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ETHERnet:QTAG:VALue
When the Ethernet search condition is set to QTAG, this command specifies the
32–bit QTAG value to search for. The default is all X’s (don’t care).
SEARCH<x>
is the search number, which is always 1, and B<x> is the bus number B1-B4.
Conditions
This command requires a DPO4ENET application module for DPO/MSO4000B
and MDO4000/B/C models.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ETHERnet:QTAG:VALue
<QString>
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ETHERnet:QTAG:VALue?
Related Commands
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ETHERnet:CONDition
Arguments
QString is a quoted string of up to 32 characters where the allowable characters
are 0, 1, and X. The bits specified in the quoted string replace the least significant
bits, leaving any unspecified upper bits unchanged.
Examples
SEARCH:SEARCH1:TRIGGER:A:BUS:B1:ETHERNET:QTAG:VALUE
“XXXXXXXXXXXXXXXXXXXX010010001010” would specify to search for
the Q-Tag value of hexadecimal XXXXX48A.
SEARCH:SEARCH1:TRIGGER:A:BUS:B1:ETHERNET:QTAG:VALUE? might
return "XXXXXXXXXXXXXXXXXXXX010010001010".
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:ETHERnet:QUALifier
This command specifies the qualifier to be used when the Ethernet search
condition is set to
MACLENgth or DATa. Normally, the Ethernet qualifier is set
to “Equal to”.
SEARCH<x> is the search number, which is always 1, and B<x> is
the bus number B1-B4.
Conditions
This command requires a DPO4ENET application module for DPO/MSO4000B
and MDO4000/B/C models.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-643