MDO3000 Programmer Manual.pdf - 第740页

Commands Listed in A lphabetical Order Conditions This command re quires the DPO4USB application module to be installed, except for MDO 3000 mo dels, which require the MDO 3USB. N ote that 1 GHz bandwidth models are reco…

100%1 / 1158
Commands Listed in Alphabetical Order
Syntax
SEARCH:SEARCH
<x>:TRIGger:A:BUS:B<x>:USB:QUALifier
{LESSthan|MOREthan|EQual|UNEQual|LESSEQual
|MOREEQual|INrange|OUTrange}
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:QUALifier?
Related Commands
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:CONDition
Arguments
LESSthan indicates the oscilloscope will search for a value that is less than a
set value.
MOREthan indicates the oscilloscope will search for a value that is greater than a
set value.
EQual indicates the oscilloscope will search for a value that is equal to a set value.
UNEQual indicates the oscilloscope will search for a value that is not equal to a
set value.
LESSEQual indicates the oscilloscope will search for a value that is less than
or equal to a set value.
MOREEQual indicates the oscilloscope will search for a value that is greater than
or equal to a set value.
INrange indicates the oscilloscope will search for a value that is within a range
set by two values.
OUTrange indicates the oscilloscope will search for a value that is outside of a
range set by two values.
Examples
SEARCH:SEARCH1:TRIGGER:A:BUS:B1:USB:QUALIFIER LESSTHAN sets the
oscilloscope to search when an address, data, or endpoint value is less thana
set value.
SEARCH:SEARCH1:TRIGGER:A:BUS:B1:USB:QUALIFIER? might return
:SEARCH:SEARCH1:TRIGGER:A:BUS:B1:USB:QUALIFIER EQUAL indicating
that the search condition is to search when an address, data, or endpoint is equal
to a set value.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:SOFFRAMENUMber
This command specifies the value for the start of frame to be used in a USB search,
when the search condition is set to
TOKENPacket, and the token type is set to SOF
(Start of Frame). S EARCH<x> is the search number, which is always 1, and B< x>
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-709
Commands Listed in Alphabetical Order
Conditions
This command re
quires the DPO4USB application module to be installed, except
for MDO3000 models, which require the MDO3USB. Note that 1 GHz bandwidth
models are recommended for high-speed (HS) USB.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:SOFFRAMENUMber
<QString>
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:SOFF
RAMENUMber?
Related Commands
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:CONDition,
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:TOKENType
Arguments
<QString> within the range 000 0000 0000 to 111 1111 1111 (000 hex to 7FF
hex).
Examples
SEARCH:SEARCH1:TRIGGER:A:BUS:B1:USB:SOFFRAMENUMBER
“00000001000”
sets the start of frame number to 00000001000 (008 hex).
SEARCH:SEARCH1:TRIGGER:A:BUS:B1:USB:SOFFRAMENUMBER? might
return
:SEARCH:SEARCH1:TRIGGER:A:BUS:B1:USB:SOFFRAMENUMBER
“00000001001”
, which indicates that the start of frame number is 00000001001
(009 hex).
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:SPECIALType
This command specifies the packet ID (PID) for the special packet to be used in
a USB search: any, preamble or reserved.
SEARCH<x> is the search number,
whichisalways1,and
B<x>
Conditions
This command requires the DPO4USB application module to be installed, except
for MDO3000 models, which require the MDO3USB. Note that 1 GHz bandwidth
models are recommended for high-speed (HS) USB.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:SPECIALType
{ANY|PREamble|RESERVed}
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:SPECIALType?
2-710 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
Commands Listed in Alphabetical Order
Arguments
ANY indicates t
he oscilloscope will search for any type of special packet.
PREamble indicates the oscilloscope will search for a preamble special packet.
RESERVed indicates the oscilloscope will search for a reserved special packet.
Examples
SEARCH:SEARCH1:TRIGGER:A:BUS1:USB:SPECIALTYPE PREAMBLE sets
the special packet type to preamble.
SEARCH:SEARCH1:TRIGGER:A:BUS1:USB:SPECIALTYPE? might return
:SEARCH:SEARCH1:TRIGGER:A:BUS1:USB:SPECIALTYPE PREAMBLE,
indicating that the special type is set to preamble.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:SPLit:ET:VALue
When searching on a high-speed USB split transaction, this command specifies
the split transaction endpoint type value to search for.
SEARCH<x> is the search
number, which is always 1, and
B<x>
Conditions
This command requires the DPO4USB application module to be installed, except
for MDO3000 models, which require the MDO3USB. Note that 1 GHz bandwidth
models are recommended for high-speed (HS) USB.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:SPLit:ET:VALue
{NOCARE|CONTRol|ISOchronous|BULK|INTERRUPT}
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:SPLit:ET:VALue?
Related Commands
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:USB:SPECIALType
Arguments
NOCARE — any endpoint type.
CONTRol — control endpoint type.
ISOchronous — isochronous endpoint type.
BULK — bulk endpoint type (BULK-IN or BULK-OUT).
INTERRUPT — interrupt endpoint type (Interrupt-IN).
Examples
SEARCH:SEARCH1:TRIGger:A:BUS:B1:USB:SPLit:ET:VALue iso sets the
endpoint type to sear
ch for to isochronous.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-711