MDO3000 Programmer Manual.pdf - 第871页

Commands Listed in Alphabetical Order Examples TRIGger:A:BUS :B1:MIL1553B:ERR TYPE PARity sets the error type to be used in the trigger to P ARITY . TRIGger:A:BUS :B1:MIL1553B:ERR TYPE? might return SYNC. TRIGger:A:BUS:B…

100%1 / 1158
Commands Listed in Alphabetical Order
Related Commands
TRIGger:A:BUS
:B<x>:MIL1553B:CONDition
TRIGger:A:BUS:B<x>:MIL1553B:DATa:PARity
Arguments
QString is a quoted string of up to 16 characters, where the allowable characters
are 0, 1, and X. The bits specified in the quoted string replace the least significant
bits, leaving any unspecified upper bits unchanged.
Examples
TRIGger:A:BUS:B1:MIL1553B:DATa:VALue “01000” sets the data binary
pattern to be used in a MIL-STD-155
3 bus trigger to 01000.
TRIGger:A:BUS:B1:MIL1553B:DATa:VALue? might return
XXXXXXXXXXX01000.
TRIGger:A:BUS:B<x>:MIL1553B:ERRTYPE
When the MIL-STD-1553 bus trigger condition is set to ERRor, this command
specifies the signaling error type to be used in the trigger: Parity, Sync,
Manchester or Data.
B<x>
Conditions
This command requires a DPO4AERO application module for DPO/MSO4000B
and MDO4000/B/C models or MDO3AERO application module for
MDO3000 models.
Group
Trigger
Syntax
TRIGger:A:BUS:B<x>:MIL1553B:ERRTYPE
{PARity|SYNC|MANCHester|DATA}
TRIGger:A:BUS:B<x>:MIL1553B:ERRTYPE?
Related Commands
TRIGger:A:BUS:B<x>:MIL1553B:CONDition
Arguments
PARity — an incorrect parity setting.
SYNc — the high to low, or low to high transition doesn’t happen in the middle
of the sync time as it should.
MANCHester — no transition in a bit time.
DATA — a non-contiguous data error.
2-840 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
Commands Listed in Alphabetical Order
Examples
TRIGger:A:BUS
:B1:MIL1553B:ERRTYPE PARity
sets the error type to be
used in the trigger to PARITY.
TRIGger:A:BUS:B1:MIL1553B:ERRTYPE? might return SYNC.
TRIGger:A:BUS:B<x>:MIL1553B:STATus:ADDRess:HIVALue
When the MIL-STD-1553 bus trigger condition is set to STATus, and the qualifier
is set to
INrange or OUTrange, this command specifies the upper limit for
the 5 bit remote terminal address field of the Status word. (Use the command
TRIGger:A:BUS:B<x>:MIL1553B:STATus:ADDRess:VALue to specify the
lower limit.) The default is all X’s (don’t care).
B<x>
Conditions
This command requires a DPO4AERO application module for DPO/MSO4000B
and MDO4000/B/C models or MDO3AERO application module for
MDO3000 models.
Group
Trigger
Syntax
TRIGger:A:BUS:B<x>:MIL1553B:STATus:ADDRess:HIVALue <QString>
TRIGger:A:BUS:B<x>:MIL1553B:STATus:ADDRess:HIVALue?
Related Commands
TRIGger:A:BUS:B<x>:MIL1553B:CONDition
TRIGger:A:BUS:B<x>:MIL1553B:STATus:ADDRess:VALue
TRIGger:A:BUS:B<x
>:MIL1553B:STATus:ADDRess:QUALifier
Arguments
QString is a quoted string of up to 5 characters, where the allowable characters
are 0, 1, and X. The
bits specified in the quoted string replace the least significant
bits, leaving any unspecified upper bits unchanged.
Examples
TRIGger:A:BUS
:B1:MIL1553B:HIVAL
“01000” sets the upper limit of the
range of the terminal address to 01000 (when the trigger condition is set to
MIL1553B, and the qualifier is set to INrange or OUTrange).
TRIGger:A:BUS:B1:MIL1553B:HIVAL?
might return “XXXXX”.
TRIGger:A:BUS:B<x>:MIL1553B:STATus:ADDRess:QUALifier
When the MIL-STD-1553 bus trigger condition is set to STATus, this command
specifies the qualifier to be used with the address field. The default is EQUAL.
B<x>
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-841
Commands Listed in Alphabetical Order
Conditions
This command re
quires a DPO4AERO application module for DPO/MSO4000B
and MDO4000/B/C models or MDO3AERO application module for
MDO3000 models.
Group
Trigger
Syntax
TRIGger:A:BUS:B<x>:MIL1553B:STATus:ADDRess:QUALifier
{LESSthan|MOREthan|EQual|UNEQual|LESSEQual|MOREEQual|
INrange|OUTrange}
TRIGger:A:BUS:B<x>:MIL1553B:STATus:ADDRess:QUALifier?
Related Commands
TRIGger:A:BUS:B<x>:MIL1553B:CONDition
TRIGger:A:BUS:B<x>:MIL1553B:STATus:ADDRess:QUALifier
TRIGger:A:BUS:B<x>:MIL1553B:STATus:ADDRess:HIVALue
TRIGger:A:BUS:B<x>:MIL1553B:STATus:ADDRess:VALue
Arguments
LESSthan sets the Status Address qualifier to less than.
MOREthan sets the Status Address qualifier to greater than.
EQual sets the Status Address qualifier to equal.
UNEQual sets the Status Address qualifier to not equal.
LESSEQual sets the Status Address qualifier to less than or equal.
MOREEQual sets the Status Address qualifier to greater than or equal.
INrange sets the Status Address qualifier to in range.
OUTrange sets the Status Address qualifier to out of range.
Examples
TRIGger:A:BUS:B1:MIL1553B:STATus:ADDRess:QUALifier MOREthan
sets the qualifier to be used with the address field to greater than.
TRIGger:A:BUS:B1:MIL1553B:STATus:ADDRess:QUALifier? might
return MORETHAN.
TRIGger:A:BUS:B<x>:MIL1553B:STATus:ADDRess:VALue
When the MIL-STD-1553 bus trigger condition is set to STATus ,andthe
qualifier is set to
LESSthan, MOREthan, EQual, UNEQual, LESSEQual
or MOREEQual, this command specifies the value of the 5–bit remote terminal
address to be used in the trigger. When the MIL-STD-1553 bus trigger
2-842 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual