MDO3000 Programmer Manual.pdf - 第98页

Command Groups T able 2-39: Search Commands (cont.) Command Description SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:MIL1553B: DA T a:P ARity When the MIL-STD-1553 bus search condition is set to DATa ,t h i s command …

100%1 / 1158
Command Groups
Table 2-39: Search Commands (cont.)
Command Description
SEARCH:SEARC H<x>:T RIG ger:A:BUS:B<x>:I2C:DATa:SIZe This command specifies the length of the data string in bytes to
be used for I2C search
SEARCH:SEARC H<x>:T RIG ger:A:BUS:B<x>:I2C:DATa:
VALue
This command specifiesthebinarydatastringtobeusedforI2C
search
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:CONDition This command specifies the search condition for a LIN search
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:
HIVALue
This command specifies the binary data string
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:
QUALifier
This command specifies the LIN data qualifier
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:SIZe This command specifies the length of the data string in bytes
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:DATa:
VALue
This command specifies the binary data string used for a LIN search
SEARCH:SEARCH<x>:TRIGger:A:BUS:B <x>:LIN:ERRTYPE This command specifies the error type used for a LIN search
SEARCH:SEARC H<x>:T RIG ger:A:BUS:B<x>:LIN:IDentifier:
VALue
This command specifi es the binary address string used for LIN
search
SEARCH:SEARCH<x>:TRIGger:A:BUS:B <x>:MIL1553B :
COMMAND:ADDRess:HIVALue
When the MIL-STD-1553 bus search condition is set to COMMAND,
and the qualifier is set to
INrange or OUTrange , this command
specifies the upper limit of the range for the remote terminal
address field.
SEARCH:SEARCH<x>:TRIG:A:BUS:B<x>:MIL1553B:
COMMAND:ADDR:QUAL
When the MIL-STD-1553 bus search condition is set to COMMAND,
this command specifies the qualifier to be used with the remote
terminal address field.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B <x>:MIL1553B :
COMMAND:ADDRess:VALue
When the MIL-STD-1553 bus search condition is set to COMMAND,
and the qualifier is set to
LESSthan, MOREthan, EQual,
UNEQual, LESSEQual
or MOREEQual, this command
specifies the value of the 5–bit r emote terminal address to be used
in the search.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B <x>:MIL1553B :
COMMAND:COUNt
When the MIL-STD-1553 bus search condition is set to COMMAND,
this command speci fies the bit pattern for the 5–bit Word
Count/Mode Code sub-address field that is to be used in the search.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B <x>:MIL1553B :
COMMAND:PARity
When the MIL-STD-1553 bus search condition is set to COMMAND,
this command specifies the Command word parity that is to be used
in the search.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B <x>:MIL1553B :
COMMAND:SUBADdress
When the MIL-STD-1553 bus search condition is set to COMMAND,
this command specifies the 5 bit sub-address that is to be used
in the search.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B <x>:MIL1553B :
COMMAND:TRBit
When the MIL-STD-1553 bus search condition is set to COMMAND,
this command specifies that the transmit/receive bit ( bit 9) is to be
used in the search.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B <x>:MIL1553B :
CONDition
This command specifies a word type or condition within a
MIL-STD-1553 bus word to search for.
SEARCH<x> is the search
number, which is always 1, and
B<x>
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-67
Command Groups
Table 2-39: Search Commands (cont.)
Command Description
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:MIL1553B:
DATa:PARity
When the MIL-STD-1553 bus search condition is set to DATa,this
command specifies the data parity bit to be used in the search.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:MIL1553B:
DATa:VALue
When the MIL-STD-1553 bus search condition is set to DATa,this
command specifies the data binary pattern to be used in the search.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:MIL1553B:
ERRTYPE
When the MIL-STD-1553 bus search condition is set to ERRor,
this command specifies the signaling error type to be used in the
search: Parity, Sync, Manchester or D ata.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:MIL1553B:
STATus:ADDRess:HIVALue
When the MIL-STD-1553 bus search condition is set to STATus,
and the qualifi er is set to
INrange or OUTrange, this command
specifies the upper limit for the 5 bit remote terminal address field
of the Status word.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:MIL1553B:
STATus:ADDRess:VALue
When the MIL-STD-1553 bus search condition is set to STATus,
and the qualifier is set to
LESSthan, MOREthan, EQual,
UNEQual, LESSEQual
or MOREEQual, this command
specifies the value of the 5–bit r emote terminal address to be used
in the search.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:MIL1553B:
STATus:ADDRess:QUALifier
When the MIL-STD-1553 bus search condition is set to STATus,
this command specifies the qualifier to be used with the address
field.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:MIL1553B:
STATus:BIT:BCR
When the MIL-STD-1553 bus search condition is set to STATus,
this command specifies the s tatus word broadcast command
received (BCR) bit value (bit 15) to be used in the search.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:MIL1553B:
STATus:BIT:BUSY
When the MIL-STD-1553 bus search condition is set to STATus,
this command specifies the status word busy bit value (bit 16) to be
used in the search.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:MIL1553B:
STATus:BIT:DBCA
When the MIL-STD-1553 bus search condition is set to STATus,
this command specifies the s tatus word dynamic bus control
acceptance (DBCA) bit value (bit 18) to be used in the search.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:MIL1553B:
STATus :BIT:INSTR
When the MIL-STD-1553 bus search condition is set to STATus,
this command specifies the status word instrumentation bit value
(bit 10) to be used in the search.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:MIL1553B:
STATus :BIT:ME
When the MIL-STD-1553 bus search condition is set to STATus,
this command specifies the status w ord m essage error bit value
(bit 9) to be used in the s earch.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:MIL1553B:
STATus:BIT:SRQ
When the MIL-STD-1553 bus search condition is set to STATus,
this command specifies the status word service request (SRQ) bit
value (bit 11) to be used in the search.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:MIL1553B:
STATus:BIT:SUBSF
When the MIL-STD-1553 bus search condition is set to STATus,
this command specifies the status word subsystem flag bit value
(bit 17) to be used in the search.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:MIL1553B:
STATus :BIT:TF
When theMIL-STD-1553 bus search condition is set to STATus,
this command specifies the status word terminal flag bit value (bit
19) to be used in the search.
2-68 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
Command Groups
Table 2-39: Search Commands (cont.)
Command Description
SEARCH:SEARCH<x>:TRIGger:A:BUS:B <x>:MIL1553B :
STATus:PARity
When the MIL-STD-1553 bus search condition is set to STATus,
this command specifies the status parity bit value to be used in
the search.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B <x>:MIL1553B :
TIMe:LESSLimit
When the MIL-STD-1553 bus search condition is set to TI Me,this
command specifies either the minimum remote terminal response
time (RT) limit for the amount of time the terminal has to transmit, or
it specifies the m inimum inter-message gap (IMG).
SEARCH:SEARCH<x>:TRIGger:A:BUS:B <x>:MIL1553B :
TIMe:MORELimit
When the MIL-STD-1553 bus search condition is set to TI Me,this
command specifies either the maximum remote terminal response
time (RT) limit for the amount of time the terminal has to transmit, or
it specifies the m aximum inter-message gap (IMG).
SEARCH:SEARCH<x>:TRIGger:A:BUS:B <x>:MIL1553B :
TIMe:QUALifier
When the MIL-STD-1553 bus search condition is set to TI Me,this
command specifies the trigger data time qualifier.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B <x>:PARallel:
VALue
This command specifi esthebinarydatastringtobeusedfora
Parallel search
SEARCH:SEARCH<x>:TRIGger:A:BUS:B <x>:RS232C:
CONDition
This command specifies the search condition for an RS-232 trigger
SEARCH:SEARCH<x>:TRIGger:A:BUS:B <x>:RS232C:RX:
DATa:SIZe
This command specifies the length o f the data string for an
RS-232search, if the search condition is RX
SEARCH:SEARCH<x>:TRIGger:A:BUS:B <x>:RS232C:RX:
DATa:VALue
This command specifies the binary data string for an RS-232 search,
if the condition involves RX
SEARCH:SEARCH<x>:TRIGger:A:BUS:B <x>:RS232C:TX:
DATa:SIZe
This command speci fies the length of the data string to be used for
an RS-232 search, if the search condition is TX
SEARCH:SEARCH<x>:TRIGger:A:BUS:B <x>:RS232C:TX:
DATa:VALue
This command specifies the binary data string to be used for an
RS-232 search, if the condition involves RX
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:SPI:CONDition This command specifies the search condition for SPI search
SEARCH:SEARCH<x>:TRIGger:A:BUS:B <x>:SPI:DATa{:
MISO|:IN}:VALue
This command specifies the binary data string to be used for SPI
search if the search condition is MISO or MISOMOSI
SEARCH:SEARCH<x>:TRIGger:A:BUS:B <x>:SPI:DATa{:
MOSI|:OUT}:VALue
This command specifies the binary data string for an SPI search if
the search condition is MISO or MISOMOSI
SEARCH:SEARCH<x>:TRIGger:A:BUS:B <x>:SPI:DATa:SIZe This command specifies the length of the data string i n bytes to
be used for SPI search
SEARCH:SEARCH<x>:TRIGger:A:BUS:B <x>:USB :
ADDRess:HIVALue
This command specifies the high limit for USB address searches
SEARCH:SEARCH<x>:TRIGger:A:BUS:B <x>:USB :
ADDRess:VALue
This command specifies the value for USB address searches
SEARCH:SEARCH<x>:TRIGger:A:BUS:B <x>:USB :
CONDition
This command specifies the USB search condition.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B <x>:USB :DATa:
HIVALue
This command specifies the high limit for U SB data searches
SEARCH:SEARCH<x>:TRIGger:A:BUS:B <x>:USB :DATa:
OFFSet
This command specifies the data offset for USB data searches
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-69