AG900 and AG900 S Applicators Customer Product Manual

AG900+ and AG900+S Applicators Customer Product Manual Part 1098464A Issued 9/09

AG900+ and

AG900+S

Applicators

Customer Product Manual

Part 1098464A

Issued 9/09

Part 1098464A

 2009 Nordson Corporation

For CE Declaration, refer to melter manual.

Nordson Corporation welcomes requests for information, comments, and inquiries about its

products. General information about Nordson can be found on the Internet using the following

address: http://www.nordson.com.

Address all correspondence to:

Nordson Corporation

Attn: Customer Service

11475 Lakefield Drive

Duluth, GA 30097

Notice

This is a Nordson Corporation publication which is protected by copyright. Original copyright date 2006.

No part of this document may be photocopied, reproduced, or translated to another language without the

prior written consent of Nordson Corporation. The information contained in this publication is subject to

change without notice.

Trademarks

AccuJet, AeroCharge, Apogee, AquaGuard, Asymtek, Automove, Baitgun, Blue Box, CanWorks, Century, CF,

Clean Coat, CleanSleeve, CleanSpray, ColorMax, Control Coat, Coolwave, Cross-Cut, Cyclo-Kinetic, Dispensejet,

DispenseMate, DuraBlue, Durafiber, Dura-Screen, Durasystem, Easy Coat, Easymove Plus, Ecodry, Econo-Coat,

e.dot, EFD, e stylized, ETI, Excel 2000, Fillmaster, FlexiCoat, Flexi-Spray, Flex-O-Coat, Flow Sentry, Fluidmove,

FoamMelt, FoamMix, HDLV Heli-flow, Helix, Horizon, Hot Shot, iControl, iFlow, Isocoil, Isocore, Iso-Flo, iTRAX,

Kinetix, Little Squirt, LogiComm, Magnastatic, March, Maverick, MEG, Meltex, Microcoat, Micromark, MicroSet,

Millennium, Mini Squirt, Mountaingate, MultiScan, Nordson, OptiMix, Package of Values, Pattern View, PermaFlo,

Plasmod, Porous Coat, PowderGrid, Powderware, Printplus, Prism, ProBlue, Pro-Flo, ProLink, Pro-Meter,

Pro-Stream, RBX, Rhino, Saturn, Scoreguard, Seal Sentry, Select Charge, Select Coat, Select Cure, Slautterback,

Smart-Coat, Solder Plus, Spectrum, Speed-Coat, SureBead, Sure Clean, Sure Coat, Sure-Max, Tracking Plus,

TRAK, Trends, Tribomatic, TrueBlue, Ultra, Ultrasaver, UpTime, Vantage, Veritec, VersaBlue, Versa-Coat,

Versa-Screen, Versa-Spray, Walcom, Watermark, and When you expect more

are registered trademarks of Nordson Corporation.

Accubar, Advanced Plasma Systems, AeroDeck, AeroWash, AltaBlue, AquaCure, ATS, Auto-Flo, AutoScan,

Best Choice, Blue Series, Check Mate, Classicblue, Color-on-Demand, Controlled Fiberization, Control Weave,

CPX, cScan, DispensLink, Dry Cure, DuraBraid, DuraCoat, DuraDrum, DuraPail, Easy Clean, EasyOn, Eclipse,

E-Nordson, EquiBead, ESP, FilEasy, Fill Sentry, FluxPlus, G−Net, G−Site,, iON, Iso-Flex, iTrend, Lacquer Cure,

Lean Cell, Maxima, MicroFin, MicroMax, Mikros, MiniBlue, MiniEdge, Minimeter, Multifil, Myritex, OptiStroke,

Partnership+Plus, PatternJet, PatternPro, PCI, Powder Pilot, Powercure, Precise Coat, Primarc, Process Sentry,

Prodigy, Pulse Spray, Quad Cure, Ready Coat, Royal Blue, Select Series, Sensomatic, Shaftshield, SheetAire,

Smart, SolidBlue, Spectral, Spectronic, SpeedKing, Spray Works, Summit, Sure Brand, SureMix, SureSeal,

Sure Wrap, Swirl Coat, Tempus, Trade Plus, ThruWave, Ultrasmart, Universal, ValveMate, VersaDrum, VersaPail,

Vista, Web Cure, and 2 Rings (Design) are trademarks of Nordson Corporation.

Designations and trademarks stated in this document may be brands that, when used by third parties for their own

purposes, could lead to violation of the owners’ rights.

Table of Contents

Part 1098464A

 2009 Nordson Corporation

Safety 1...............................................................

Safety Alert Symbols 1.................................................

Responsibilities of the Equipment Owner 1................................

Safety Information 2.................................................

Instructions, Requirements, and Standards 2............................

User Qualifications 2.................................................

Applicable Industry Safety Practices 3....................................

Intended Use of the Equipment 3......................................

Instructions and Safety Messages 3....................................

Installation Practices 3...............................................

Operating Practices 4................................................

Maintenance and Repair Practices 4...................................

Equipment Safety Information 4..........................................

Equipment Shutdown 5...............................................

Relieving System Hydraulic Pressure 5.............................

De-energizing the System 5......................................

Disabling the applicators 5.......................................

General Safety Warnings and Cautions 5...............................

Other Safety Precautions 8...........................................

First Aid 9..........................................................

Description 10...........................................................

Needle and Nozzle Design 11............................................

Material Pressure Regulator 11...........................................

Hose Connections 11...................................................

Specifications 12.......................................................

Physical Dimensions 12.................................................

Installation 13...........................................................

Operation 16............................................................

Maintenance 17..........................................................

Maintenance Schedule 17...............................................