AG900 and AG900 S Applicators Customer Product Manual - 第6页
AG − 900+ and AG900+S Applicators 2 Part 1098464A 2009 Nordson Corporation Safety Information Research and evaluate safety information from all applicable sources, including the owner-specific safety policy , best in…
AG−900+ and AG900+S Applicators
1
2009 Nordson Corporation
Part 1098464A
AG900+ and AG900+S Applicators
Safety
Read this section before using the equipment. This section contains recommendations and
practices applicable to the safe installation, operation, and maintenance (hereafter referred
to as “use”) of the product described in this document (hereafter referred to as
“equipment”). Additional safety information, in the form of task-specific safety alert
messages, appears as appropriate throughout this document.
WARNING! Failure to follow the safety messages, recommendations, and hazard
avoidance procedures provided in this document can result in personal injury,
including death, or damage to equipment or property.
Safety Alert Symbols
The following safety alert symbol and signal words are used throughout this document to
alert the reader to personal safety hazards or to identify conditions that may result in
damage to equipment or property. Comply with all safety information that follows the signal
word.
WARNING! Indicates a potentially hazardous situation that, if not avoided, can
result in serious personal injury, including death.
CAUTION! Indicates a potentially hazardous situation that, if not avoided, can
result in minor or moderate personal injury.
CAUTION! (Used without the safety alert symbol) Indicates a potentially
hazardous situation that, if not avoided, can result in damage to equipment or
property.
Responsibilities of the Equipment Owner
Equipment owners are responsible for managing safety information, ensuring that all
instructions and regulatory requirements for use of the equipment are met, and for
qualifying all potential users.
AG−900+ and AG900+S Applicators
2
Part 1098464A
2009 Nordson Corporation
Safety Information
Research and evaluate safety information from all applicable sources, including the
owner-specific safety policy, best industry practices, governing regulations, material
manufacturer’s product information, and this document.
Make safety information available to equipment users in accordance with governing
regulations. Contact the authority having jurisdiction for information.
Maintain safety information, including the safety labels affixed to the equipment, in
readable condition.
Instructions, Requirements, and Standards
Ensure that the equipment is used in accordance with the information provided in this
document, governing codes and regulations, and best industry practices.
If applicable, receive approval from your facility’s engineering or safety department, or
other similar function within your organization, before installing or operating the
equipment for the first time.
Provide appropriate emergency and first aid equipment.
Conduct safety inspections to ensure required practices are being followed.
Re-evaluate safety practices and procedures whenever changes are made to the
process or equipment.
User Qualifications
Equipment owners are responsible for ensuring that users:
receive safety training appropriate to their job function as directed by governing
regulations and best industry practices
are familiar with the equipment owner’s safety and accident prevention policies and
procedures
receive, equipment- and task-specific training from another qualified individual
NOTE: Nordson can provide equipment-specific installation, operation, and
maintenance training. Contact your Nordson representative for information
possess industry- and trade-specific skills and a level of experience appropriate to
their job function
are physically capable of performing their job function and are not under the influence
of any substance that degrades their mental capacity or physical capabilities
Applicable Industry Safety Practices
The following safety practices apply to the use of the equipment in the manner described in
this document. The information provided here is not meant to include all possible safety
practices, but represents the best safety practices for equipment of similar hazard potential
used in similar industries.
AG−900+ and AG900+S Applicators
3
2009 Nordson Corporation
Part 1098464A
Intended Use of the Equipment
Use the equipment only for the purposes described and within the limits specified in this
document.
Do not modify the equipment.
Do not use incompatible materials or unapproved auxiliary devices. Contact your
Nordson representative if you have any questions on material compatibility or the use of
non-standard auxiliary devices.
Instructions and Safety Messages
Read and follow the instructions provided in this document and other referenced
documents.
Familiarize yourself with the location and meaning of the safety warning labels and tags
affixed to the equipment. Refer to Safety Labels and Tags at the end of this section.
If you are unsure of how to use the equipment, contact your Nordson representative for
assistance.
Installation Practices
Install the equipment in accordance with the instructions provided in this document and in
the documentation provided with auxiliary devices.
Ensure that the equipment is rated for the environment in which it will be used and that
the processing characteristics of the material will not create a hazardous environment.
Refer to the Material Safety Data Sheet (MSDS) for the material.
If the required installation configuration does not match the installation instructions,
contact your Nordson representative for assistance.
Position the equipment for safe operation. Observe the requirements for clearance
between the equipment and other objects.
Install lockable power disconnects to isolate the equipment and all independently
powered auxiliary devices from their power sources.
Properly ground all equipment. Contact your local building code enforcement agency for
specific requirements.
Ensure that fuses of the correct type and rating are installed in fused equipment.
Contact the authority having jurisdiction to determine the requirement for installation
permits or inspections.
Operating Practices
Familiarize yourself with the location and operation of all safety devices and indicators.
Confirm that the equipment, including all safety devices (guards, interlocks, etc.), is in
good working order and that the required environmental conditions exist.
Use the personal protective equipment (PPE) specified for each task. Refer to Equipment
Safety Information or the material manufacturer’s instructions and MSDS for PPE
requirements.
Do not use equipment that is malfunctioning or shows signs of a potential malfunction.