3OM-1064-001 - 第146页

0005-002 2-91 Tg0248-PM-ER Error Code Display A Display B 3. T rouble Shooting after Error Display 60 05 05 SAFETY CIRCUIT (Cause 1) This is the device’ s self-diagnostic message. (Reset Procedure in the case of Cause 1)…

100%1 / 308
60 05 02 SAFETY CIRCUIT AREA SENSORS FOR BEAM-B SIDE WERE
ACTIVATED.;BPH083,BPH084 E / NR
(Cause 1) This is the device’s self-diagnostic message.
(Reset Procedure in the case of Cause 1)
Reset Procedure
(1) Press the [CLEAR ALARM] key and the buzzer stops sounding.
(2) Press the [ZERO] button to return all the axes to their original positions.
(3) Re-start.
(4) If the device can’t be re-started, contact our service personnel.
Error Code Display A Display B
0005-002 2-90 Tg0248-PM-ER
3. Trouble Shooting after Error Display
60 05 01 SAFETY CIRCUIT AREA SENSORS FOR BEAM-A SIDE WERE
ACTIVATED.;BPH081,BPH082 E / NR
(Cause 1) This is the device's self-diagnostic message.
(Reset Procedure in the case of Cause 1)
Reset Procedure
(1) Press the [CLEAR ALARM] key and the buzzer stops sounding.
(2) Press the [ZERO] button to return all the axes to their original positions.
(3) Re-start.
(4) If the device can’t be re-started, contact our service personnel.
60 04 0E INTERLOCK YB AXIS POSITIONING BACKWARD WAS NOT
DETECTED.;BPH031
(Cause 1) Check whether or not solenoid valves (YSV02A) and (YSV02B) for YB-axis stationary
position stopper forward and backward movement are working normally.
(Reset Procedure in the case of Cause 1)
Reset Procedure
(1) Press the [CLEAR ALARM] key and the buzzer stops sounding.
(2) Check whether or not YB-axis stationary position stopper forward sensor (BPH031) is
functioning correctly.
(3) Press the [ZERO] button to return all the axes to their original positions.
(4) Re-start.
(5) If the device can’t be re-started, contact our service personnel.
60 04 0D INTERLOCK YB AXIS POSITIONING FORWARD WAS NOT
DETECTED.;BPH030
(Cause 1) Check whether or not solenoid valves (YSV02A) and (YSV02B) for YB-axis stationary
position stopper forward and backward movement are working normally.
(Reset Procedure in the case of Cause 1)
Reset Procedure
(1) Press the [CLEAR ALARM] key and the buzzer stops sounding.
(2) Check whether or not YB-axis stationary position stopper forward sensor (BPH030) is
functioning correctly.
(3) Press the [ZERO] button to return all the axes to their original positions.
(4) Re-start.
(5) If the device can’t be re-started, contact our service personnel.
0005-002 2-91 Tg0248-PM-ER
Error Code Display A Display B
3. Trouble Shooting after Error Display
60 05 05 SAFETY CIRCUIT
(Cause 1) This is the device’s self-diagnostic message.
(Reset Procedure in the case of Cause 1)
Reset Procedure
(1) Press the [CLEAR ALARM] key and the buzzer stops sounding.
(2) Press the [ZERO] button to return all the axes to their original positions.
(3) Re-start.
(4) If the device can’t be re-started, contact our service personnel.
60 05 04 SAFETY CIRCUIT
(Cause 1) This is the device’s self-diagnostic message.
(Reset Procedure in the case of Cause 1)
Reset Procedure
(1) Press the [CLEAR ALARM] key and the buzzer stops sounding.
(2) Press the [ZERO] button to return all the axes to their original positions.
(3) Re-start.
(4) If the device can’t be re-started, contact our service personnel.
60 05 03 SAFETY CIRCUIT
(Cause 1) This is the device’s self-diagnostic message.
(Reset Procedure in the case of Cause 1)
Reset Procedure
(1) Press the [CLEAR ALARM] key and the buzzer stops sounding.
(2) Press the [ZERO] button to return all the axes to their original positions.
(3) Re-start.
(4) If the device can’t be re-started, contact our service personnel.
0005-002 2-92 Tg0248-PM-ER
Error Code Display A Display B
3. Trouble Shooting after Error Display
(Cause 1) The specified camera may not be able to recognize the lead width and pitch in the
component library data for the current program.
(Reset Procedure in the case of Cause 1)
Reset Procedure
(1) Press the [CLEAR ALARM] key and the buzzer stops sounding.
(2) Select other view range camera.
(3) Press the [ZERO] button to return all the axes to their original positions.
(4) Re-start.
(5) If the device can’t be re-started, contact our service personnel.
61 02 01 INSIDE RECOGNITION
XXXXXX
REFER TO “SECTION 4 RECOGNITION ERROR”.
(Cause 1) This is the device’s self-diagnostic message.
(Reset Procedure in the case of Cause 1)
Reset Procedure
(1) Press the [CLEAR ALARM] key and the buzzer stops sounding.
(2) Press the [ZERO] button to return all the axes to their original positions.
(3) Re-start.
(4) If the device can’t be re-started, contact our service personnel.
Note: Refer to “Section 4 Recognition Error Codes”.
61 01 01 PLACEMENT NOZZLE NO AVAILABLE NOZZLE FOUND IN NOZZLE
STOCKER.
(Cause 1) No available nozzle found in nozzle stocker.
(Reset Procedure in the case of Cause 1)
Reset Procedure
(1) Register the nozzle used for the nozzle arrangement data.
(2) Arrange the nozzle in the nozzle stocker.
(3) Re-start the operation.
(4) If the machine can’t be reset even after this check work, contact our service personnel be-
cause the sensor cable or sensor may be defective.
61 03 01 COMPONENT RECOGNITION
DATA
UNAVAILABLE RECOGNITION IN DESIGNATED
CAMERA.
UNAVAILABLE RECOGNITION IN CAMERA WITH
MACHINE.
(Cause 1) There is no appropriate camera visual field available to cameras A1, A2, B1 and B2.
(Reset Procedure in the case of Cause 1)
Reset Procedure
(1) Press the [CLEAR ALARM] key and the buzzer stops sounding.
(2) Check error message on program change and correct data.
(3) Press the [ZERO] button to return all the axes to their original positions.
(4) Re-start.
(5) If the device can’t be re-started, contact our service personnel.
61 03 02 COMPONENT RECOGNITION
DATA