3OM-1064-001 - 第188页

1. CHECK Display Compared with an “ERROR” display which appears when an error occurs while a device is activated, an “CHECK” display appears when a pushbutton on the operation panel is pressed under the condition that re…

100%1 / 308
Section 3
Starting Guidance
0005-002 3-1 Tg0248-PM-ER
1. CHECK Display
Compared with an “ERROR” display which appears when an error occurs
while a device is activated, an “CHECK” display appears when a pushbutton
on the operation panel is pressed under the condition that requirements for a
device to be activated are not fulfilled with the machine in the “STOP” or
“PAUSE” mode.
Fig. 3.1
A: Check Item
B: Check Messages
Refer to “3. List of Check Messages” for the detailed information on the check
messages and remedial information.
Reset Procedure after Check Message
(1) Refer to the “CHECK” display and operate and activate the devices in-
stalled on the machine.
(2) Press the [RTN] key or the [RESET] button on the operation panel to
resume the original display.
0005-002 3-2 Tg0248-PM-ER
1. CHECK Display
A
B
2. Check Codes
Check codes are classified as follows and expressed in *1 through *4 below.
3. List of Check Messages
Check “Section A” and “Section B” at the management information message
display and operate or activate the device referring to the following manage-
ment information message list.
*1: Shows the category of priority for check and remedy.
*2: Shows the Check Item (Section A).
*3: Shows the Check Message (Section B).
*4: Shows the Check Code.
Notes: (a) The “” marked items are optional.
(b) When error description is indicated, refer to
“Section 4 Recognition Error Codes”.
*1 Priority Code
*2 Block Code
*3 Classification Code
*4 CPU2 Management Code
2. Check Codes
0005-002 3-3 Tg0248-PM-ER
*1 *2 *3
Indication Example
*4
Priority
No.
Item (Section A) Check Message (Section B) Check Code Remarks
EMERGENCY STOP
TURN OFF THE [EMERGENCY STOP] BUTTON AND
TURN ON THE [POWER ON] BUTTON.
010101XX
AIR PRESSURE DROP
INCREASE AIR PRESSURE AND PRESS THE [POWER
ON] BUTTON TO POWER UP THE MACHINE.
010201XX
CUT OFF THE LOAD
POWER CIRCUIT
PRESS THE [POWER ON] BUTTON TO POWER UP THE
MACHINE.
010301XX
CLOSE THE MAINTENANCE COVER [A] (BACK SIDE) AND PRESS
THE [POWER ON] BUTTON TO POWER UP THE MACHINE.
010401XX
CLOSE THE MAINTENANCE COVER [A] (BACK SIDE)
010402XX
CLOSE THE MAINTENANCE COVER [B] (FRONT SIDE) AND PRESS
THE [POWER ON] BUTTON TO POWER UP THE MACHINE.
010403XX
MAINTENANCE
COVER
CLOSE THE MAINTENANCE COVER [B] (FRONT SIDE)
010404XX
CLOSE THE SAFETY BAR[A] (BACK SIDE) AND PRESS THE
[POWER ON] BUTTON TO POWER UP THE MACHINE.
010501XX
CLOSE THE SAFETY BAR[B] (FRONT SIDE) AND PRESS THE
[POWER ON] BUTTON TO POWER UP THE MACHINE.
010502XX
CLOSE THE SAFETY BAR[A] (BACK SIDE) AND PRESS THE
[READY [A] ] BUTTON TO SET FEEDER [A] IN READY MODE.
010503XX
01
SAFETY BAR
CLOSE THE SAFETY BAR [B] (FRONT SIDE) AND PRESS THE
[READY [B] ] BUTTON TO SET FEEDER [B] IN READY MODE.
010504XX