3OM-1064-001 - 第190页

3. List of Check Messages 0005-002 3-4 Tg0248-PM-ER Pri or ity No. Item (S ection A) Check Mess age (Section B ) Check Code Remarks EMERGENCY STOP TURN O FF THE [EMERGENCY S TOP ] BUTT ON A ND TURN ON THE [POWER ON] BUTT…

100%1 / 308
2. Check Codes
Check codes are classified as follows and expressed in *1 through *4 below.
3. List of Check Messages
Check “Section A” and “Section B” at the management information message
display and operate or activate the device referring to the following manage-
ment information message list.
*1: Shows the category of priority for check and remedy.
*2: Shows the Check Item (Section A).
*3: Shows the Check Message (Section B).
*4: Shows the Check Code.
Notes: (a) The “” marked items are optional.
(b) When error description is indicated, refer to
“Section 4 Recognition Error Codes”.
*1 Priority Code
*2 Block Code
*3 Classification Code
*4 CPU2 Management Code
2. Check Codes
0005-002 3-3 Tg0248-PM-ER
*1 *2 *3
Indication Example
*4
Priority
No.
Item (Section A) Check Message (Section B) Check Code Remarks
EMERGENCY STOP
TURN OFF THE [EMERGENCY STOP] BUTTON AND
TURN ON THE [POWER ON] BUTTON.
010101XX
AIR PRESSURE DROP
INCREASE AIR PRESSURE AND PRESS THE [POWER
ON] BUTTON TO POWER UP THE MACHINE.
010201XX
CUT OFF THE LOAD
POWER CIRCUIT
PRESS THE [POWER ON] BUTTON TO POWER UP THE
MACHINE.
010301XX
CLOSE THE MAINTENANCE COVER [A] (BACK SIDE) AND PRESS
THE [POWER ON] BUTTON TO POWER UP THE MACHINE.
010401XX
CLOSE THE MAINTENANCE COVER [A] (BACK SIDE)
010402XX
CLOSE THE MAINTENANCE COVER [B] (FRONT SIDE) AND PRESS
THE [POWER ON] BUTTON TO POWER UP THE MACHINE.
010403XX
MAINTENANCE
COVER
CLOSE THE MAINTENANCE COVER [B] (FRONT SIDE)
010404XX
CLOSE THE SAFETY BAR[A] (BACK SIDE) AND PRESS THE
[POWER ON] BUTTON TO POWER UP THE MACHINE.
010501XX
CLOSE THE SAFETY BAR[B] (FRONT SIDE) AND PRESS THE
[POWER ON] BUTTON TO POWER UP THE MACHINE.
010502XX
CLOSE THE SAFETY BAR[A] (BACK SIDE) AND PRESS THE
[READY [A] ] BUTTON TO SET FEEDER [A] IN READY MODE.
010503XX
01
SAFETY BAR
CLOSE THE SAFETY BAR [B] (FRONT SIDE) AND PRESS THE
[READY [B] ] BUTTON TO SET FEEDER [B] IN READY MODE.
010504XX
3. List of Check Messages
0005-002 3-4 Tg0248-PM-ER
Priority
No.
Item (Section A) Check Message (Section B) Check Code Remarks
EMERGENCY STOP
TURN OFF THE [EMERGENCY STOP] BUTTON AND
TURN ON THE [POWER ON] BUTTON.
010101XX
AIR PRESSURE DROP
INCREASE AIR PRESSURE AND PRESS THE [POWER
ON] BUTTON TO POWER UP THE MACHINE.
010201XX
CUT OFF THE LOAD
POWER CIRCUIT
PRESS THE [POWER ON] BUTTON TO POWER UP THE
MACHINE.
010301XX
CLOSE THE MAINTENANCE COVER [A] (BACK SIDE) AND PRESS
THE [POWER ON] BUTTON TO POWER UP THE MACHINE.
010401XX
CLOSE THE MAINTENANCE COVER [A] (BACK SIDE)
010402XX
CLOSE THE MAINTENANCE COVER [B] (FRONT SIDE) AND PRESS
THE [POWER ON] BUTTON TO POWER UP THE MACHINE.
010403XX
MAINTENANCE
COVER
CLOSE THE MAINTENANCE COVER [B] (FRONT SIDE)
010404XX
CLOSE THE SAFETY BAR[A] (BACK SIDE) AND PRESS THE
[POWER ON] BUTTON TO POWER UP THE MACHINE.
010501XX
CLOSE THE SAFETY BAR[B] (FRONT SIDE) AND PRESS THE
[POWER ON] BUTTON TO POWER UP THE MACHINE.
010502XX
CLOSE THE SAFETY BAR[A] (BACK SIDE) AND PRESS THE
[READY [A] ] BUTTON TO SET FEEDER [A] IN READY MODE.
010503XX
SAFETY BAR
CLOSE THE SAFETY BAR [B] (FRONT SIDE) AND PRESS THE
[READY [B] ] BUTTON TO SET FEEDER [B] IN READY MODE.
010504XX
CIRCUIT PROTECTOR IS ACTIVE IN THE MACHINE.
010601XX
CIRCUIT PROTECTOR FOR BEAM-A IS ACTIVE.;K101A
010602XX
CIRCUIT PROTECTOR FOR BEAM-B IS ACTIVE.;K101B
010603XX
CIRCUIT PROTECTOR FOR BACKUP UP/DOWN (BPC-
AXIS) IS ACTIVE.;Q351
010604XX
CIRCUIT PROTECTOR FOR CONVEYOR WIDTH (PWC-
AXIS) IS ACTIVE.;K51
010605XX
CIRCUIT PROTECTOR FOR TRAY-L IS ACTIVE.;TL-Q501
010606XX
♦
CIRCUIT PROTECTOR FOR TRAY-R IS ACTIVE.;TR-Q501
010607XX
♦
CIRCUIT PROTECTOR FOR TRAVERSE IS ACTIVE.;Q401,402
010608XX
CIRCUIT PROTECTOR FOR FEEDER [A] (BACK SIDE) IS
ACTIVE.; Q131, 132
010609XX
CIRCUIT PROTECTOR
CIRCUIT PROTECTOR FOR FEEDER [B] (FRONT SIDE)
IS ACTIVE.;Q133, 134
010610XX
CLOSE THE COMPONENT SUPPLY COVER [A] (BACK
SIDE) AND PRESS THE [POWER ON] BTN. TO POWER
UP THE MACHINE.
010701XX
CLOSE THE COMPONENT SUPPLY COVER [B] (BACK
SIDE) AND PRESS THE [POWER ON] BTN. TO POWER
UP THE MACHINE.
010702XX
CLOSE THE COMPONENT SUPPLY COVER [B] (BACK
SIDE) AND PRESS THE [READY [B] ] BUTTON TO SET
FEEDER [B] IN READY MODE.
010703XX
SUPPLY COVER
CLOSE THE COMPONENT SUPPLY COVER [A] (BACK
SIDE) AND PRESS THE [READY [A] ] BUTTON TO SET
FEEDER [A] IN READY MODE.
010704XX
BEAM ABNORMAL
APPROACH
OPEN THE SUPPLY COVER AND PULL AWAY THE
ABNORMALLY APPROACHING BEAM BY HAND.
010801XX
01
BEAM POWER
CUT OFF
BEAM POWER CUTOFF IS DETECTED. PRESS THE [SYS
CLR] BUTTON.
010901XX
Priority
No.
Item (Section A) Check Message (Section B) Check Code Remarks
SET OPERATION MODE TO PLACEMENT.
030101XX
PLEASE SELECT THE AVAILABLE MENU.
030102XX
SET ENABLE FOR DESTINATION ALTERNATE FEEDER.
030103XX
MACHINE IS IN PAUSE MODE.
030104XX
INPUT CORRECT DATA FOR MANUAL AXIS
OPERATION.
030105XX
PLEASE INPUT CORRECT NOZZLE TYPE DATA.
030106XX
INPUT NON-DEFECTIVE P.C.B.
㧔
O-NO
㧕
030107XX
WAIT UNTIL DATA COMMUNICATION WITH EXTERNAL
DEVICE IS COMPLETED.
030108XX
PLEASE CANCEL “SET UP” MODE AS CLOSING A
MAINTENANCE COVER [A] (BACK SIDE)
030109XX
PLEASE CANCEL “SET UP” MODE AS CLOSING A
MAINTENANCE COVER [B] (FRONT SIDE).
030110XX
REMOVE P.C.B. ON L-CONVEYOR.
030111XX
No Checking in
“TEST” Mode
REMOVE P.C.B. ON P-CONVEYOR.
030112XX
No Checking in
“TEST” Mode
REMOVE P.C.B. ON R-CONVEYOR.
030113XX
No Checking in
“TEST” Mode
REMOVE P.C.B. ON EL-CONVEYOR.
030114XX
No Checking in
“TEST” Mode
REMOVE P.C.B. ON ER-CONVEYOR.
030115XX
No Checking in
“TEST” Mode
SET TRAY-L OPERATION MODE TO
“
LINE
”
.
030116XX
♦
SET TRAY-R OPERATION MODE TO
“
LINE
”
.
030117XX
♦
CLOSE THE TRAY-L UPPER DOOR.
030118XX
♦
CLOSE THE TRAY-L LOWER DOOR.
030119XX
♦
CLOSE THE TRAY-R UPPER DOOR.
030120XX
♦
CLOSE THE TRAY-R LOWER DOOR.
030121XX
♦
INPUT THE TEST ID
030122XX
♦
INPUT THE FEEDER NO.
030123XX
♦
SET JIG P.C.B.
030124XX
♦
IT ISN’T PRACTICABLE WITDTH
“
SET UP
”
MODE.
030125XX
NOZZLE IS NOT ATTACHED WITH HEAD.
030126XX
NOZZLE IS ATTACHED WITH HEAD.
030127XX
NOZZLE IS NOT STORED AT THE SPECIFIED NOZZLE
STOCKER ADDRESS.
030128XX
L-AXIS IS NOT NEAR ORIGIN.
030129XX
CHECK THE L TRAY MATRIX DATA(X,Y). (SHORTAGE
OF COMPONENT IS DETECTED.)
030130XX
CHECK THE R TRAY MATRIX DATA(X,Y). (SHORTAGE
OF COMPONENT IS DETECTED.)
030131XX
BPC-AXIS NOT ORIGIN.
030132XX
P.C.B. IS NOT LOCATE ON THE P-CONVEYOR.
030133XX
CLOSE NOZZLE STOCKER A1.
030134XX
CLOSE NOZZLE STOCKER A2.
030135XX
OPERATORS ERROR
CLOSE NOZZLE STOCKER B1.
030136XX
SET VACUUM OF A1-HEAD TO “OFF” IN MANUAL
SUBSYSTEM OPERATION MENU.
030137XX
SET VACUUM OF A2-HEAD TO “OFF” IN MANUAL
SUBSYSTEM OPERATION MENU.
030138XX
SET VACUUM OF B1-HEAD TO “OFF” IN MANUAL
SUBSYSTEM OPERATION MENU.
030139XX
SET VACUUM OF B2-HEAD TO “OFF” IN MANUAL
SUBSYSTEM OPERATION MENU.
030140XX
02
THE BANK CARRIAGE CART IS NOT LOCATED AT ITS
STATIONARY POSITION.
CONNECT IT CORRECTLY OR DISCONNECT IT
COMPLETELY FROM THE MACHINE.
030141XX
♦
3. List of Check Messages
0005-002 3-5 Tg0248-PM-ER
♦
♦