3OM-1064-001 - 第195页
3. List of Check Messages 0005-002 3-9 Tg0248-PM-ER Prior ity No. Item (Sect ion A) Check Mess age (Section B ) Check Code Rem arks DISEN GAGED P. C. B. SET P.C.B. 090101XX Rese rve d Data 090201XX FUR NAC E S IGNAL CH E…
Priority
No.
Item (Section A) Check Message (Section B) Check Code Remarks
SET UP STICK FEEDER OF FEEDER BASE #4 CONNEC-
TOR #43.
050609XX
SET UP STICK FEEDER OF FEEDER BASE #4 CONNEC-
TOR #44.
050610XX
SET UP STICK FEEDER OF FEEDER BASE #4 CONNEC-
TOR #45.
050611XX
03
SET UP STICK FEEDER OF FEEDER BASE #4 CONNEC-
TOR #46.
050612XX
FEEDER CHECK 4
SET UP VIBRATORY STICK FEEDER OF FEEDER BASE #4
CONNECTOR #41.
050613XX
SET UP VIBRATORY STICK FEEDER OF FEEDER BASE #4
CONNECTOR #42.
050614XX
SET UP VIBRATORY STICK FEEDER OF FEEDER BASE #4
CONNECTOR #43.
050615XX
SET UP VIBRATORY STICK FEEDER OF FEEDER BASE #4
CONNECTOR #44.
050616XX
SET UP VIBRATORY STICK FEEDER OF FEEDER BASE #4
CONNECTOR #45.
050617XX
SET UP VIBRATORY STICK FEEDER OF FEEDER BASE #4
CONNECTOR #46.
050618XX
ZERO FEEDER
CHECK WHETHER OR NOT A FEEDER (ADHESIVE TAPE,
ETC.) HAS NOT COMPLETED ITS FEEDING OPERATION.
ALSO, CHECK THAT A FEEDER IS INSTALLED COR-
RECTLY.
AND ZERO FEEDER.
050701XX
Unconditional
only in “PAUSE”
Mode
COMPONENT
LIBRARY DATA
ERROR
DATA RELATIVE TO RECOGNITION UNUSUALLY
OCCURRED.
CHECK THE DATA.
050801XX
070101XX
REMOVE MAINTENANCE AREA SENSOR [A] (BACK
SIDE) SHADED.;BPH081,082
070201XX
MAINTENANCE AREA
SENSOR
REMOVE MAINTENANCE AREA SENSOR [B] (FRONT
SIDE) SHADED. :BPH083,084
070202XX
REMOVE FEEDER MIS-SET SENSOR [A1] SHADED.
;BPH053
070301XX
REMOVE FEEDER MIS-SET SENSOR [A2] SHADED.
;BPH054
070302XX
REMOVE FEEDER MIS-SET SENSOR [B1] SHADED.
;BPH055
070303XX
FEEDER MIS-SET
REMOVE FEEDER MIS-SET SENSOR [B2] SHADED.
;BPH055
070304XX
REMOVE NOZZLE MIS-SET SENSOR [A1] SHADED.
;F(A1)-BPH061
070401XX
REMOVE NOZZLE MIS-SET SENSOR [A2] SHADED.
;F(A2)-BPH061
070402XX
♦
NOZZLE MIS-SET
REMOVE NOZZLE MIS-SET SENSOR [B1] SHADED.
;F(B1)-BPH061
070403XX
UNAVAILABLE DATA
INPUT AVAILABLE FEEDER NO. IN CURRENT PRO-
GRAM.
070501XX
Reserved Data
COMPONENT REJECT CUP [A] BECAME FULL.
REMOVE COMPONENT FROM COMPONENT REJECT
CUP [A]. ;(CC(A)-BPH044)
070601XX
COMPONENT REJECT CUP [B] BECAME FULL.
REMOVE COMPONENT FROM COMPONENT REJECT
CUP [B]. ;(CC(B)-BPH044)
070602XX
COMPONENT REJECT CONVEYOR [A] BECAME FULL.
REMOVE COMPONENT FROM COMPONENT REJECT
CONVEYOR [A]. ;(CC(A)-BPH046)
070603XX
04
COMPONENT REJECT
COMPONENT REJECT CONVEYOR [B] BECAME FULL.
REMOVE COMPONENT FROM COMPONENT REJECT
CONVEYOR [B]. ;(CC(B)-BPH046)
070604XX
3. List of Check Messages
0005-002 3-8 Tg0248-PM-ER
3. List of Check Messages
0005-002 3-9 Tg0248-PM-ER
Priority
No.
Item (Section A) Check Message (Section B) Check Code Remarks
DISENGAGED P.C.B.
SET P.C.B.
090101XX
Reserved Data
090201XX
FURNACE SIGNAL
CHECK THE FURNACE SIGNAL.
090301XX
05
RECOGNITION
READY
WAIT UNTIL RECOGNITION-UNIT IS READY TO WORK.
090401XX
PRESS THEޣREADY [A]ޤBUTTON TO SET FEEDER [A] IN
READY MODE.
110101XX
PRESS THEޣREADY[B]ޤBUTTION TO SET FEEDER [B] IN
READY MODE.
110102XX
PRESS THEޣREADY[UPR]ޤBUTTON TO SET TRAY-L
UPPER MAGAZINE IN READY MODE.
110103XX
♦
PRESS THEޣREADY[LWR]ޤBUTTON TO SET TRAY-L
LOWER MAGAZINE IN READY MODE.
110104XX
♦
PRESS THEޣREADY[UPR]ޤBUTTON TO SET TRAY-R
UPPER MAGAZINE IN READY MODE.
110105XX
♦
PRESS THEޣREADY[LWR]ޤBUTTON TO SET TRAY-R
LOWER MAGAZINE IN READY MODE.
110106XX
♦
THE BANK CARRIAGE CART-A IS NOT LOCATED AT ITS
STATIONARY POSITION.
DISCONNECT IT COMPLETELY FROM THE MACHINE AT
MANUAL MODE.
110107XX
♦
THE BANK CARRIAGE CART-B IS NOT LOCATED AT ITS
STATIONARY POSITION.
DISCONNECT IT COMPLETELY FROM THE MACHINE AT
MANUAL MODE.
110108XX
♦
CONNECT THE BANK CARRIAGE CART-A COMPLETELY
WITH THE MACHINE.
110109XX
♦
CONNECT THE BANK CARRIAGE CART-B COMPLETELY
WITH THE MACHINE.
110110XX
♦
06 FEEDER NOT READY
SWITCH
SET “ENABLE” FOR DESTINATION ALTERNATE
FEEDER. [FDR XXX]
110111XX
ZERO ALL DEVICES WITH THEޣZEROޤBUTTON.
130101XX
ZERO CONVEYOR WIDTH (PWC-AXIS).
130102XX
ZERO P.C.B. LOCATE LEVER (PPC-AXIS).
130103XX
♦
ZERO TRAY-L.
130104XX
♦
ZERO TRAY-R.
130105XX
♦
07 OUT OF ORIGIN
ZERO BACKUP UP/DOWN AXIS. (BPC-AXIS)
130106XX
♦
0005-002 3-10 Tg0248-PM-ER