3OM-1064-001 - 第196页
0005-002 3-10 Tg0248-PM-ER
3. List of Check Messages
0005-002 3-9 Tg0248-PM-ER
Priority
No.
Item (Section A) Check Message (Section B) Check Code Remarks
DISENGAGED P.C.B.
SET P.C.B.
090101XX
Reserved Data
090201XX
FURNACE SIGNAL
CHECK THE FURNACE SIGNAL.
090301XX
05
RECOGNITION
READY
WAIT UNTIL RECOGNITION-UNIT IS READY TO WORK.
090401XX
PRESS THEޣREADY [A]ޤBUTTON TO SET FEEDER [A] IN
READY MODE.
110101XX
PRESS THEޣREADY[B]ޤBUTTION TO SET FEEDER [B] IN
READY MODE.
110102XX
PRESS THEޣREADY[UPR]ޤBUTTON TO SET TRAY-L
UPPER MAGAZINE IN READY MODE.
110103XX
♦
PRESS THEޣREADY[LWR]ޤBUTTON TO SET TRAY-L
LOWER MAGAZINE IN READY MODE.
110104XX
♦
PRESS THEޣREADY[UPR]ޤBUTTON TO SET TRAY-R
UPPER MAGAZINE IN READY MODE.
110105XX
♦
PRESS THEޣREADY[LWR]ޤBUTTON TO SET TRAY-R
LOWER MAGAZINE IN READY MODE.
110106XX
♦
THE BANK CARRIAGE CART-A IS NOT LOCATED AT ITS
STATIONARY POSITION.
DISCONNECT IT COMPLETELY FROM THE MACHINE AT
MANUAL MODE.
110107XX
♦
THE BANK CARRIAGE CART-B IS NOT LOCATED AT ITS
STATIONARY POSITION.
DISCONNECT IT COMPLETELY FROM THE MACHINE AT
MANUAL MODE.
110108XX
♦
CONNECT THE BANK CARRIAGE CART-A COMPLETELY
WITH THE MACHINE.
110109XX
♦
CONNECT THE BANK CARRIAGE CART-B COMPLETELY
WITH THE MACHINE.
110110XX
♦
06 FEEDER NOT READY
SWITCH
SET “ENABLE” FOR DESTINATION ALTERNATE
FEEDER. [FDR XXX]
110111XX
ZERO ALL DEVICES WITH THEޣZEROޤBUTTON.
130101XX
ZERO CONVEYOR WIDTH (PWC-AXIS).
130102XX
ZERO P.C.B. LOCATE LEVER (PPC-AXIS).
130103XX
♦
ZERO TRAY-L.
130104XX
♦
ZERO TRAY-R.
130105XX
♦
07 OUT OF ORIGIN
ZERO BACKUP UP/DOWN AXIS. (BPC-AXIS)
130106XX
♦
0005-002 3-10 Tg0248-PM-ER
Section 4
Recognition Error Codes
0005-002 4-1 Tg0248-PM-ER