3OM-1064-001 - 第218页

0005-002 4-22 Tg0248-PM-ER Error Code Display A Display B 10470002 TEACHING THE LIGHTING “HEAD NO.” EXCEEDS THE RANGE OF SETTING. 10470003 TEACHING THE LIGHTING “NOZZLE ID” EXCEEDS THE RANGE OF SETTING. 10470004 TEACHING…

100%1 / 308
3. Control-to-Control Communication Error Code and List of Error Messages
0005-002 4-21 Tg0248-PM-ER
Error Code Display A Display B
10450001 TEACHING THE CAMERA
GAIN / LEVEL
“HEAD NO.” EXCEEDS THE RANGE OF SETTING.
10450000 TEACHING THE CAMERA
GAIN / LEVEL
“CAMERA NO.” EXCEEDS THE RANGE OF SETTING.
10460000 TEACHING THE CAMERA
SHUTTER SPEED
“CAMERA NO.” EXCEEDS THE RANGE OF SETTING.
10460001 TEACHING THE CAMERA
SHUTTER SPEED
“HEAD NO.” EXCEEDS THE RANGE OF SETTING.
10460002 TEACHING THE CAMERA
SHUTTER SPEED
“LEVEL” EXCEEDS THE RANGE OF SETTING.
10460003 TEACHING THE CAMERA
SHUTTER SPEED
“RECOGNITION METHOD” EXCEEDS THE RANGE OF
SETTING.
(Cause 1) This is the device’s self-diagnostic message.
(Reset Procedure in the case of Cause 1)
Reset Procedure
(1) Press the [CLEAR ALARM] key and the buzzer stops sounding.
(2) Press the [ZERO] button to return all the axes to their original positions.
(3) Re-start.
(4) If the device can’t be re-started, contact our service personnel.
(Cause 1) This is the device’s self-diagnostic message.
(Reset Procedure in the case of Cause 1)
Reset Procedure
(1) Press the [CLEAR ALARM] key and the buzzer stops sounding.
(2) Press the [ZERO] button to return all the axes to their original positions.
(3) Re-start.
(4) If the device can’t be re-started, contact our service personnel.
0005-002 4-22 Tg0248-PM-ER
Error Code Display A Display B
10470002 TEACHING THE LIGHTING
“HEAD NO.” EXCEEDS THE RANGE OF SETTING.
10470003 TEACHING THE LIGHTING “NOZZLE ID” EXCEEDS THE RANGE OF SETTING.
10470004 TEACHING THE LIGHTING “RECOGNITION METHOD” EXCEEDS THE RANGE OF
SETTING.
10470001 TEACHING THE LIGHTING
“LIGHTING TYPE” EXCEEDS THE RANGE OF SETTING.
10470000 TEACHING THE LIGHTING “CAMERA NO.” EXCEEDS THE RANGE OF SETTING.
10480002 COMPONENT LIBRARY
TEACH
“NOZZLE POSITION” EXCEEDS THE RANGE OF
SETTING.
10480003 COMPONENT LIBRARY
TEACH
“CAMERA NO.” EXCEEDS THE RANGE OF SETTING.
10480004 COMPONENT LIBRARY
TEACH
“HEAD NO.” EXCEEDS THE RANGE OF SETTING.
10480001 COMPONENT LIBRARY
TEACH
“NOZZLE ID” EXCEEDS THE RANGE OF SETTING.
10480000 COMPONENT LIBRARY
TEACH
“TEACH MODE” EXCEEDS THE RANGE OF SETTING.
10480005 COMPONENT LIBRARY
TEACH
“START-UP MODE” EXCEEDS THE RANGE OF
SETTING.
(Cause 1) This is the device’s self-diagnostic message.
(Reset Procedure in the case of Cause 1)
Reset Procedure
(1) Press the [CLEAR ALARM] key and the buzzer stops sounding.
(2) Press the [ZERO] button to return all the axes to their original positions.
(3) Re-start.
(4) If the device can’t be re-started, contact our service personnel.
(Cause 1) This is the device’s self-diagnostic message.
(Reset Procedure in the case of Cause 1)
Reset Procedure
(1) Press the [CLEAR ALARM] key and the buzzer stops sounding.
(2) Press the [ZERO] button to return all the axes to their original positions.
(3) Re-start.
(4) If the device can’t be re-started, contact our service personnel.
3. Control-to-Control Communication Error Code and List of Error Messages
0005-002 4-23 Tg0248-PM-ER
Error Code Display A Display B
10510001 SETTING THE RECOGNITION
MONITOR DISPLAY MODE
“COMP. RECOG SELECTION” EXCEEDS THE RANGE
OF SETTING.
“CAMERA NO.” EXCEEDS THE RANGE OF SETTING.
10510003 SETTING THE RECOGNITION
MONITOR DISPLAY MODE
“COMPONENT ID” EXCEEDS THE RANGE OF SETTING.
10510004 SETTING THE RECOGNITION
MONITOR DISPLAY MODE
“COMPONENT NO.” EXCEEDS THE RANGE OF
SETTING.
10510002 SETTING THE RECOGNITION
MONITOR DISPLAY MODE
10510005 SETTING THE RECOGNITION
MONITOR DISPLAY MODE
“HEAD NO.” EXCEEDS THE RANGE OF SETTING.
10510006 SETTING THE RECOGNITION
MONITOR DISPLAY MODE
“NOZZLE ID” EXCEEDS THE RANGE OF SETTING.
10510007 SETTING THE RECOGNITION
MONITOR DISPLAY MODE
“DISPLAY MODE” EXCEEDS THE RANGE OF SETTING
10500000 SETTING THE RECOGNITION
FUNCTION
“EXECUTIVE FUNCTION” EXCEEDS THE RANGE OF
SETTING.
10510000 SETTING THE RECOGNITION
MONITOR DISPLAY MODE
“MODE” EXCEEDS THE RANGE OF SETTING.
(Cause 1) This is the device’s self-diagnostic message.
(Reset Procedure in the case of Cause 1)
Reset Procedure
(1) Press the [CLEAR ALARM] key and the buzzer stops sounding.
(2) Press the [ZERO] button to return all the axes to their original positions.
(3) Re-start.
(4) If the device can’t be re-started, contact our service personnel.
(Cause 1) This is the device’s self-diagnostic message.
(Reset Procedure in the case of Cause 1)
Reset Procedure
(1) Press the [CLEAR ALARM] key and the buzzer stops sounding.
(2) Press the [ZERO] button to return all the axes to their original positions.
(3) Re-start.
(4) If the device can’t be re-started, contact our service personnel.