3OM-1064-001 - 第230页

2010X003 COMPONENT OUTW ARD LENGTH ERROR Note : X represents “1 through 4, 8 and 9”. COMPONENT OUTW ARD LENGTH Y WAS LESS THAN TOLERANCE. 2010X004 COMPONENT OUTW ARD LENGTH ERROR Note : X represents “1 through 4, 8 and 9…

100%1 / 308
0005-002 4-33 Tg0248-PM-ER
5. Component Recognition Error Code and List of Error Messages
20010000 COMPONENT MISSING COMPONENT WAS NOT FOUND.
Error Code Display A Display B
2001X001 COMPONENT MISSING
Note: X represents “1 through 4,
8 and 9”.
COMPONENT WAS NOT FOUND.
(Cause 1) This is the device’s self-diagnostic message.
(Reset Procedure in the case of Cause 1)
Reset Procedure
(1) Press the [CLEAR ALARM] key and the buzzer stops sounding.
(2) Press the [ZERO] button to return all the axes to their original positions.
(3) Re-start.
(4) If the device can’t be re-started, contact our service personnel.
2010X003 COMPONENT OUTWARD
LENGTH ERROR
Note: X represents “1 through 4,
8 and 9”.
COMPONENT OUTWARD LENGTH Y WAS LESS THAN
TOLERANCE.
2010X004 COMPONENT OUTWARD
LENGTH ERROR
Note: X represents “1 through 4,
8 and 9”.
COMPONENT OUTWARD LENGTH Y WAS MORE THAN
TOLERANCE.
2010X005 COMPONENT OUTWARD
LENGTH ERROR
Note: X represents “1 through 4,
8 and 9”.
COMPONENT OUTWARD LENGTH X WAS INCOR-
RECT.
2010X002 COMPONENT OUTWARD
LENGTH ERROR
Note: X represents “1 through 4,
8 and 9”.
COMPONENT OUTWARD LENGTH X WAS MORE THAN
TOLERANCE.
2010X001 COMPONENT OUTWARD
LENGTH ERROR
Note: X represents “1 through 4,
8 and 9”.
COMPONENT OUTWARD LENGTH X WAS LESS THAN
TOLERANCE.
2010X007 COMPONENT OUTWARD
LENGTH ERROR
Note: X represents “1 through 4,
8 and 9”.
COMPONENT OUTWARD LENGTH X OR Y WAS IN-
CORRECT.
2010X006 COMPONENT OUTWARD
LENGTH ERROR
Note: X represents “1 through 4,
8 and 9”.
COMPONENT OUTWARD LENGTH Y WAS INCOR-
RECT.
(Cause 1) Wrong parameters (mold size X, Y and tolerance) are set for the selected component.
(Cause 2) Dirt and dust, etc., have adhered to the nozzle diffusion plate and the head lighting unit
in the vicinity of the corners (or edges or leads).
(Cause 3) An improper parameter is set in the "DIRECTION" data box of the label "LEAD
DATA".
(Reset Procedure in the case of Causes 1, 2 and 3)
Reset Procedure
(1) Check the selected component and the parameters set in the “X” and “Y” text boxes of the
label “MOLD SIZE” and in the “X” and “Y” text boxes of the label “MOLD SIZE TOLER-
ANCE” in the component library data.
(2) If wrong parameters are set in the component library data, correct them.
0103-003 4-34 Tg0248-PM-ER
5. Component Recognition Error Code and List of Error Messages
Error Code Display A Display B
X
Y
Y
Notes:(a) When the front-lighting system is used to recognize square and deform components, the
word “LEAD” is changed to “ELECTRICAL CONTACT”.
(b) The last two digits of the error code represents the lead No.
(Cause 1) The lead width of the selected component exceeds its tolerance.
(Cause 2) Too small parameter is set in the "LEAD WIDTH TOL" data box.
The parameter set in the "LEAD WIDTH TOL" data box becomes valid only when
"MANUAL" is set in both "RECOG DATA SET" and "LEAD WIDTH TOL SET" data
boxes.
(Cause 3) Dirt and dust, etc., have adhered to the nozzle diffusion plate and the head lighting unit
in the vicinity of the leads.
(Reset Procedure in the case of Causes 1, 2 and 3)
Reset Procedure
(1) Check the selected component and the parameters set in the “WIDTH” text boxes of the lebel
“LEAD DATA” in the component library data.
(2) If wrong parameters are set in the component library data, correct them.
5. Component Recognition Error Code and List of Error Messages
0103-003 4-35 Tg0248-PM-ER
20113230 LEAD WIDTH ERROR
to 239
WIDTH OF LEAD 3 (LEFT) EXCEEDS THE TOLERANCE.
Error Code Display A Display B
20113310 LEAD WIDTH ERROR
to 319
WIDTH OF LEAD 1 (LOWER) EXCEEDS THE TOLER-
ANCE.
20113330 LEAD WIDTH ERROR
to 339
WIDTH OF LEAD 3 (LOWER) EXCEEDS THE TOLER-
ANCE.
20113410 LEAD WIDTH ERROR
to 419
WIDTH OF LEAD 1 (RIGHT) EXCEEDS THE TOLER-
ANCE.
20113420 LEAD WIDTH ERROR
to 429
WIDTH OF LEAD 2 (RIGHT) EXCEEDS THE TOLER-
ANCE.
20113320 LEAD WIDTH ERROR
to 329
WIDTH OF LEAD 2 (LOWER) EXCEEDS THE TOLER-
ANCE.
20113430 LEAD WIDTH ERROR
to 439
WIDTH OF LEAD 3 (RIGHT) EXCEEDS THE TOLER-
ANCE.
20113130 LEAD WIDTH ERROR
to 139
WIDTH OF LEAD 3 (UPPER) EXCEEDS THE TOLER-
ANCE.
20113210 LEAD WIDTH ERROR
to 219
WIDTH OF LEAD 1 (LEFT) EXCEEDS THE TOLERANCE.
20113120 LEAD WIDTH ERROR
to 129
WIDTH OF LEAD 2 (UPPER) EXCEEDS THE TOLER-
ANCE.
20113110 LEAD WIDTH ERROR
to 119
WIDTH OF LEAD 1 (UPPER) EXCEEDS THE TOLER-
ANCE.
20113220 LEAD WIDTH ERROR
to 229
WIDTH OF LEAD 2 (LEFT) EXCEEDS THE TOLERANCE.
Lead Width