3OM-1064-001 - 第43页
A : Shows an ERROR message. B : Shows the ERROR description. C : Indicates the Cause and Remedy of Error (There are some errors for which the indication may not be displayed). D : Shows an error code consisting of 6 digi…
1. ERROR Display
When a device in operation is interrupted or stopped in an error condition
(error condition detected as impossible to continue the operation), the “ER-
ROR” display (Fig. 2.2) appears on the screen.
• When an error occurs during automatic operation, the tower light illumi-
nates (standard setting) and the “ERROR” display appears on the screen.
The “ERROR” display also appears when an error occurs while a device is
running (while the LED of the [START], [MOVE], [ZERO], or [READY]
button is ON).
Note: The ♦-marked functions are optional.
Fig. 2.1
♦
♦
An error has occurred!
Fig. 2.2
0005-002 2-2 Tg0248-PM-ER
1. ERROR Display
A
B
C
E
F
G
H
D
A : Shows an ERROR message.
B : Shows the ERROR description.
C : Indicates the Cause and Remedy of Error
(There are some errors for which the indication may not be displayed).
D : Shows an error code consisting of 6 digits
E : Press the [NEXT PAGE] key to open the next page. Pressing the [PREV.
PAGE] key opens the previous page.
F : When several errors are displayed, the displayed page No. and the number
of errors appear at the upper right corner of the display.
G : This key is used to stop buzzer sound.
Ref.: When the [RESET] button on the operation panel is pressed, buzzer
sound stops and the display before an error has occurred resumes.
H : The displayed 4 digits represents a code which clarifies the error spot in
the software and is used only by a service personnel. Or, 8 digits will
appear, representing a recognition error code.
Refer to “3. Trouble Shooting after Error Display of Section 2” for details.
Remedial Procedure after Error Display
(1) Press the [CLEAR ALARM] key. (Fig. 2.2)
The buzzer stops sounding.
(2) Check the contents of the error message and the remedial procedure dis-
played on the operation monitor.
(3) Remove the cause of error.
(4) Press the [RESET] key to resume the original display.
0005-002 2-3 Tg0248-PM-ER
1. “ERROR” Display
2. Error Messages
0005-002 2-4 Tg0248-PM-ER
2. Error Messages
Main Section Error Messages A
01H XA AXIS 01H XA-AXIS ORIGIN
02H XA-AXIS TIMING
03H XA-AXIS DATA
04H XA-AXIS LIMIT
05H
XA-AXIS SERVOMOTOR DRIVER
06H XA-AXIS INTERLOCK
02H YA AXIS 01H YA-AXIS ORIGIN
02H YA-AXIS TIMING
03H YA-AXIS DATA
04H YA-AXIS LIMIT
05H
YA-AXIS SERVOMOTOR DRIVER
06H YA-AXIS INTERLOCK
03H XB AXIS 01H XB-AXIS ORIGIN
02H XB-AXIS TIMING
03H XB-AXIS DATA
04H XB-AXIS LIMIT
05H
XB-AXIS SERVOMOTOR DRIVER
06H XB-AXIS INTERLOCK
04H YB AXIS 01H YB-AXIS ORIGIN
02H YB-AXIS TIMING
03H YB-AXIS DATA
04H YB-AXIS LIMIT
05H
YB-AXIS SERVOMOTOR DRIVER
06H YB-AXIS INTERLOCK
05H 01H LA1-AXIS ORIGIN
02H LA1-AXIS TIMING
03H LA1-AXIS DATA
04H LA1-AXIS LIMIT
05H
LA1-AXIS SERVOMOTOR DRIVER
LA1 AXIS
06H LA1-AXIS INTERLOCK
06H 01H LA2-AXIS ORIGIN
03H LA2-AXIS DATA
04H LA2-AXIS LIMIT
05H
LA2-AXIS SERVOMOTOR DRIVER
LA2 AXIS
06H LA2-AXIS INTERLOCK
01H LB1-AXIS ORIGIN07H
03H
LB1-AXIS DATA
04H LB1-AXIS LIMIT
05H
LB1-AXIS SERVOMOTOR DRIVER
LB1 AXIS
06H LB1-AXIS INTERLOCK
08H LB2 AXIS 01H LB2-AXIS ORIGIN
03H LB2-AXIS DATA
04H LB2-AXIS LIMIT
05H
LB2-AXIS SERVOMOTOR DRIVER
06H LB2-AXIS INTERLOCK
09H ZA1 AXIS 01H ZA1-AXIS ORIGIN
03H ZA1-AXIS DATA
04H
ZA1-AXIS COMMUNICATION
01H ZA2-AXIS ORIGIN0AH ZA2 AXIS
03H ZA2-AXIS DATA
04H
ZA2-AXIS COMMUNICATION
0BH ZB1 AXIS 01H ZB1-AXIS ORIGIN
03H ZB1-AXIS DATA
04H
ZB1-AXIS COMMUNICATION
0CH ZB2 AXIS 01H ZB2-AXIS ORIGIN
03H ZB2-AXIS DATA
04H
ZB2-AXIS COMMUNICATION
0DH BPC AXIS 01H BPC-AXIS ORIGIN
03H
BPC-AXIS DATA
04H
BPC-AXIS LIMIT
05H
BPC-AXIS SERVOMOTOR DRIVER
06H
BPC-AXIS INTERLOCK
Main Section Error Messages A
0EH PWC AXIS 01H PWC-AXIS ORIGIN
03H PWC-AXIS DATA
04H PWC-AXIS LIMIT
06H PWC-AXIS INTERLOCK
20H 01H TFA1-AXIS ORIGIN
02H TFA1-AXIS TIMING
FEEDER BASE1
03H SEND CYLINDER
01H TFA2-AXIS ORIGIN21H
02H
TFA2-AXIS TIMING
FEEDER BASE2
03H SEND CYLINDER
01H TFB1-AXIS ORIGIN
02H TFB1-AXIS TIMING
22H
FEEDER BASE3
03H SEND CYLINDER