YSi-X_Ope_E - 第35页

8. How to replace consumable parts 4-39 8.1 Replacing the conveyor belts 4-39 8.2 Replacing the UPS (uninterruptible power supply) battery 4-41 Chapter 5 Lubrication points 1. Lubrication points and applicable grease 5-1…

100%1 / 124
2. Maintenance list 4-3
3. Preparing for maintenance tasks 4-5
3.1 Consumable parts 4-5
3.2 Maintenance tools 4-6
3.2.1 Cleaning tools 4-6
3.2.2 Lubricating tools and grease 4-7
3.3 Required tools 4-8
3.4 Removing the rear center panel 4-9
4. Weekly inspection 4-10
4.1 Cleaning the camera lighting unit 4-10
4.2 Checking the board sensor condition 4-12
4.3 Checking the board clamp condition 4-12
5. Monthly 4-13
5.1 Inspecting each axis 4-13
5.2 Cleaning and greasing the ball screws and guides 4-14
5.2.1 Cleaning and greasing the XT-axis ball screws 4-14
5.2.2 Cleaning and lubricating the XT-axis guides 4-15
5.2.3 Cleaning and greasing the YT-axis ball screws 4-16
5.2.4 Cleaning and greasing the YT-axis guides 4-17
5.2.5 Cleaning and greasing the LX-axis ball screws 4-18
5.2.6 Cleaning and greasing the LX-axis guides 4-19
5.2.7 Cleaning and greasing the LY-axis ball screws 4-20
5.2.8 Cleaning and greasing the LY-axis guides 4-21
5.3 Inspecting and cleaning the conveyor belt 4-22
5.4 Checking the conveyor belt tension 4-24
5.5 X-ray generator 4-26
5.5.1 Inspecting the X-ray generator 4-26
6. Three-month inspection 4-28
6.1 Cleaning and greasing the ball screws and guides 4-28
6.1.1 Cleaning and greasing the W-axis ball screws 4-28
6.1.2 Cleaning and greasing the W-axis guides 4-29
6.1.3 Cleaning and greasing the MS-axis guides 4-30
6.2 Inspecting and cleaning the air filter 4-31
7. Six-month inspection 4-33
7.1 Cleaning and greasing the ball screws and guides 4-33
7.1.1 Cleaning and greasing the HZ-axis ball screws 4-33
7.1.2 Cleaning and greasing the HZ-axis guide 4-35
7.1.3 Cleaning and greasing the HS-axis ball screws 4-36
7.1.4 Cleaning and greasing the HS-axis guide 4-37
7.2 Cleaning the filter of controller (Type HD/Type HB) 4-38
8. How to replace consumable parts 4-39
8.1 Replacing the conveyor belts 4-39
8.2 Replacing the UPS (uninterruptible power supply) battery 4-41
Chapter 5 Lubrication points
1. Lubrication points and applicable grease 5-1
1.1 Applicable grease 5-1
1.2 Grease gun 5-1
2. Lubrication of each unit 5-2
2.1 Each axis unit 5-2
2.1.1 XT and YT-axis guide and ball screw 5-2
2.1.2 LX-axis guide and ball screw 5-3
2.1.3 LY-axis guide and ball screw 5-4
2.1.4 W-axis guide and ball screw 5-5
2.1.5 MS-axis guide 5-6
2.1.6 HZ and HS-axis guide and ball screw 5-7
Appendix
1. Power connection terminals A-1
2. Connection between machines A-2
3. UPS (Uninterruptible Power Supply) A-3
3.1 Safety precaution A-3
3.1.1 Precautions when shipping or exporting the UPS A-3
3.1.2 Disposing of used battery after replacement A-3
3.1.3 Safety precautions A-3
3.2 About the UPS A-5
3.3 Operation and setting A-6
3.3.1 Front panel A-6
3.3.2 Operation during normal operation (power is normal) A-6
3.3.3 Operation during power failure or trouble A-6
3.4 Maintenance A-7
3.4.1 Battery replacement period A-7
3.4.2 Battery replacement A-7
3.4.3 Replacement battery storage A-7
3.5 Troubleshooting A-8
4. Precautions for X-ray generator A-10
4.1 Warming up the X-ray generator A-10
4.2 Protective function for the X-ray generator A-10
Index
The instruction manual of this machine is written for those who operate
this machine.
Please read this manual carefully for correct operations and pay
special attention to safety precautions.
After reading through this manual, please use this manual as an
occasional reference and keep it within reach.
Before using the machine
Contents
1. Using this manual i
1.1 Available manuals i
1.2 Manual contents i
2. Warranty ii
3. Contents of each chapter iii
4. Page layout iv