YSi-X_Ope_E - 第40页
iv Before using the machine 4. Page layout The description below shows a typical page layout used in this manual. Step Sub step or description of step T ypical page layout Chapter number Chapter title Figure, picture or …
iii
Before using the machine
3. Contents of each chapter
This manual is comprised of the following chapters.
Chapter 1
Part names and functions
Explains major part names and functions of the machine that you should know before attempting operation.
Chapter 2
Basic operation
This chapter explains how to start up the machine and turn it off, as well as the basic menus and elements displayed on
the operation screen.
Chapter 3 Daily operation
Chapter 3 describes the daily work performed by the operator for board inspection.
Chapter 4 Maintenance
This chapter describes checkpoints and procedures for daily and periodic inspections that must be perform to avoid
trouble with the machine.
Chapter 5 Lubrication points
Shows a list of lubrication locations and explains the procedure for lubricating the ball screw and guide of each axis.
Appendix
The appendix provides specifications for power supply connections and machine-to-machine connections, as well as
information about option units.
Index
The index at the end of this manual helps you quickly find where necessary items are explained.
iv
Before using the machine
4. Page layout
The description below shows a typical page layout used in this manual.
Step
Sub step or
description of step
Typical page layout
Chapter number
Chapter title
Figure, picture
or table caption
Note, Caution
or Warning
23001-M6-10
n
Step
This describes the procedure for each operation.
n
Substep or description of step
This provides detailed information on the steps in each procedure.
n
Figure, picture or table caption
This is the title of the figure, picture or table and appears at the upper left.
n
Note, Caution or Warning
These are explained in detail in "Safety" instructions.
