YSi-X_Ope_E - 第44页
1-3 1 Part names and functions n Behind panel (lower left front) LAN connector Pressure regulator for shutter Main pressure regulator USB port Air supply/shutoff switch Source air connector YSi-X main unit Behind lower l…
1-2
1
Part names and functions
Alarm buzzer
This buzzer sounds if an error or abnormal operation occurs. (The buzzer volume can be adjusted by turning the buzzer
ring right or left.)
Safety door
This door is locked during board inspection and cannot be opened. Press the emergency stop button to open this door
during operation. Always use the handle when opening or closing this door.
Board conveyor entrance/exit
Board loading/unloading openings that are connected to the upstream and downstream conveyors.
Pressure gauge
Setting air pressure : 0.40 MPa
Shows green for normal condition and turns red when a pressure drop is detected.
Main switch
Turns on or off the power to the machine. The power is on when turned to the right.
c
CAUTION
Wait about 10 seconds before turning the main power switch back on after turning it off.
n
Operation display and data input unit
Standard machines are equipped with a keyboard and a mouse for machine operation and data input.
Keyboard
Mouse
Liquid crystal display
YSi-X main unit
Operation and data input section
X-ray safety switch
X-ray safety switch
READY button
Emergency
stop button
23102-M6-00
Emergency stop button
Pressing this button triggers emergency stop and turns off the servo power. To release the emergency stop button, turn it
to the right.
[READY] button
When emergency stop is canceled, pressing this [READY] button turns on the servo power and the button lights up.
X-RAY indicator
Lights up when the machine servo is ON.
X-RAY safety key
Set this key to “ENABLE” when using X-ray inspection.
1-3
1
Part names and functions
n
Behind panel (lower left front)
LAN connector
Pressure regulator for shutter
Main pressure regulator
USB port
Air supply/shutoff switch
Source air connector
YSi-X main unit
Behind lower left front panel
23103-M6-00
Air supply/shutoff switch
Turning this switch to the right shuts off air supply and exhausts air that remains in the air path of the main unit.
Main pressure regulator
Adjusts the air pressure supplied to this machine. Turn the knob to adjust the air pressure so that the black needle on the
pressure gauge reads 0.4MPa.
Pressure regulator for shutter
Adjusts the air pressure to drive the shutter. Turn the knob to adjust the air pressure to 0.25MPa.
Source air connector
Prepare an air hose with an inner diameter of at least 8mm having a 30SH socket (Nitto Koki, or equivalent), and connect
it to this connector. Use dry, clean air passed through an air filter.
USB port
Use this USB port when making a backup of data.
LAN connector
This can be used for Ethernet connection.
1-4
1
Part names and functions
n
Behind panel (lower front and lower rear)
tooltip
Power
connection
terminals
Main breaker
Main breaker cable
YSi-X main unit
■ Behind lower center of front panel
Controller
UPS
(uninterruptible power supply)
■ Behind lower right of front panel
23104-M6-00
YSi-X main unit
Type HD/Type HB
■ Behind lower center of front panel
Controller UPS (uninterruptible power supply)
■ Behind lower center of rear panel
23109-M6-00
Power terminal block
Connects a 3-phase AC power cable to this terminal block. (For more details, see Appendix 1, "Power connection terminals".)
UPS (uninterruptible power supply)
The UPS retains (backs up) the power even if abnormal conditions such as power failure or voltage fluctuations occur.
(For more details, see Appendix 3, "UPS (uninterruptible power supply)".
n
Machine-to-machine connection connectors
Connector labeled "NEXT INTERFACE" connects to the downstream machine, and the connector labeled "PREVIOUS
INTERFACE" connects to the upstream machine. (For more details, see Appendix 2, "Connection between machines".
Machine-to-machine connection connectors
Behind rear panel
NEXT INTERFACE connector
(For connection to downstream machine)
PREVIOUS INTERFACE connector
(For connection to upstream machine)
23105-M6-10