YSi-X_Ope_E - 第97页
4-36 4 Maintenance 7.1.3 Cleaning and greasing the HS-axis ball screws n Required tools • Phillips screwdriver • Lent-free cleaning wipe • Specified grease (NSL) c CAUTION W ear protective glasses and gloves when handlin…
4-35
4
Maintenance
7.1.2 Cleaning and greasing the HZ-axis guide
n
Required tools
• Phillips screwdriver
• Lent-free cleaning wipe
• Grease gun
• Specified grease (NSL)
c
CAUTION
Wear protective glasses and gloves when handling grease.
e
1
Press the emergency stop button.
The machine must be in emergency stop to
ensure safety during work
.
2
Open the safety door on the rear of
the machine.
3
Clean the guides.
Move the X-ray source up and down and
then wipe away the old grease and dirt from
the entire guide with a paper wipe.
53444-M6-00
c
CAUTION
Also wipe clean the slide groove of each guide.
4
Inject new grease.
Use the grease gun to inject the specified
grease (NSL) into the grease nipple.
There are two grease nipples each for the
left and right guides (total of 4 places).
53445-M6-00
n
NOTE
See Chapter 5, “Lubrication points”, for details on the
lubrication points and grease gun nozzles.
5
Wipe away excess grease
.
Move the X-ray source up and down and
then wipe away excess grease with a paper
wipe.
Cleaning HZ-axis guide
Step 3
Guide
Paper wipe
Lubricating the HZ-axis guide
Step 4
Grease nipple
Grease nipple
Grease nipples
4-36
4
Maintenance
7.1.3 Cleaning and greasing the HS-axis ball screws
n
Required tools
• Phillips screwdriver
• Lent-free cleaning wipe
• Specified grease (NSL)
c
CAUTION
Wear protective glasses and gloves when handling grease.
e
1
Press the emergency stop button.
The machine must be in emergency stop to
ensure safety during work.
2
Open the safety door on the rear of
the machine.
3
Remove the grease spattering
prevention cover.
1. Use the Phillips screwdriver to remove the
bolts (two each on left and right)
securing the grease spattering
prevention cover.
2. Remove the grease spattering prevention
cover by pulling it left.
53446-M6-00
4
Clean the ball screws.
Move the camera to the left and right by
hand and then wipe away the old grease
and dirt from the entire ball screw with a
paper wipe.
53447-M6-00
c
CAUTION
Wipe away the old grease and dirt in the lead groove
of the ball screw.
Also check that no debris or residue
remains in the lead groove.
5
Inject new grease.
Use the grease gun to inject the specified
grease (NSL) into the grease nipple (1
place).
53448-M6-00
n
NOTE
See Chapter 5, “Lubrication points”, for details on the
lubrication points and grease gun nozzles.
6
Wipe away excess grease
.
Move the camera to the left and right
several times by hand and then wipe away
excess grease with a paper wipe.
7
Reattach the grease spattering
prevention cover.
Reattach the cover using the reverse of the
removal procedure.
Removing grease spattering prevention cover
Step 3
Grease spattering prevention cover
Cleaning the HS-axis ball screw
Step 4
Paper wipe
Lubricating the HS-axis ball screw
Step 5
Grease nipple
4-37
4
Maintenance
7.1.4 Cleaning and greasing the HS-axis guide
n
Required tools
• Lent-free cleaning wipe
• Grease gun
• Specified grease (NSL)
c
CAUTION
Wear protective glasses and gloves when handling grease.
e
1
Press the emergency stop button.
The machine must be in emergency stop to
ensure safety during work.
2
Open the safety door on the rear of
the machine.
3
Clean the guides.
Move the camera to the left and right by
hand and then wipe away the old grease
and dirt from the entire guide with a paper
wipe.
53449-M6-00
c
CAUTION
Also wipe clean the slide groove of each guide.
4
Inject new grease.
Use the grease gun to inject the specified
grease (NSL) into the grease nipple.
There are two grease nipples each on the
upper and lower guides (total of 4 grease
nipples).
53450-M6-00
n
NOTE
See Chapter 5, “Lubrication points”, for details on the
lubrication points and grease gun nozzles.
5
Wipe away excess grease
.
Move the camera several times by hand
and then wipe away excess grease with a
paper wipe.
Cleaning HS-axis guide
Step 3
Guide
Paper wipe
Lubricating the HS-axis guide
Step 4
Grease nipples
Grease nipple
Grease nipple