00198442-01_UM_TX-V2_EN - 第14页
1 Introduction User manual SIPLACE TX V2 1.1 Important notes on the user manual From software version 711.1 04/2018 14 1.1.2 Danger notes 1 1.1.3 Manufacturer's/supplier's liability We here by confirm that the …
User manual SIPLACE TX V2 1 Introduction
From software version 711.1 04/2018 1.1 Important notes on the user manual
13
1 Introduction
This user manual is a guide or reference work for operating and setting up the SIPLACE
®
TX V2
placement machines.
The TX V2 placement machines are available in three different variants:
– SIPLACE TX1
– SIPLACE TX2
– SIPLACE TX2i
The numbers in the type name indicate the number of gantries used. Each gantry has one place-
ment head.
1
The header of each chapter contains the release and software version, to which this manual ap-
plies.
1.1 Important notes on the user manual
1.1.1 Contents and filing of the user manual
This user manual contains basic information that must be observed when setting up, operating
and maintaining the machine. The service engineers, qualified staff, operators and users plus sys-
tem owner must therefore read it before commencing installation and commissioning. The instruc-
tions must be kept permanently accessible where the placement machine is used.
In addition, the user must ensure that the employees have fully understood the contents of the
user manual.
PLEASE NOTE
The SIPLACE TX V2 placement machines are of largely identical design. Any differenc-
es will be mentioned specifically.
For the relevant configurations and other options, refer to the individual specifica-
tions for the SIPLACE TX V2.
The diagrams in this user manual show the SIPLACE TX2. These diagrams also apply
in principle to the SIPLACE TX1 or TX2i. Additional diagrams will be shown for any de-
viations.
1 Introduction User manual SIPLACE TX V2
1.1 Important notes on the user manual From software version 711.1 04/2018
14
1.1.2 Danger notes
1
1.1.3 Manufacturer's/supplier's liability
We hereby confirm that the contents of this user manual are of a descriptive and explanatory na-
ture only and do not contain any contractual conditions or guaranties. The liability and obligations
assumed by ASM Assembly Systems GmbH&Co.KG can be found exclusively in the relevant
contract agreement concerning the supply of the placement machine described in this manual.
This applies in particular to all statements regarding performance or service life and the agreed
liability for faults or defects. The provisions of the contract regarding the liability for faults or defect
are neither extended nor restricted by any statements in this user manual.
1.1.4 Revision table
1
1.1.5 Further information about and contents of the documentation package
1.1.5.1 How to get information
If you have any further questions concerning this manual or if you would like additional information
on a particular topic, please get in touch with your local SIPLACE dealer or contact us directly at:
ASM Assembly Systems GmbH&Co.KG
Rupert-Mayer-Str. 44
81379 Munich 1
1.1.5.2 SIPLACE on the World Wide Web (WWW)
We also have our own site on the Internet. Why not log into our homepage at http://www.asm-smt-
solutions.com.
WARNING
Read the user manual!
Tasks may only be performed by qualified staff who have completed the relevant
training.
Only perform tasks on the placement machine if you have precise knowledge of the
relevant section in the user manual.
Observe all warnings, caution notes and hazard notes.
Please also read chapter 2 of this user manual through carefully.
Edition Amendments
04/2018 First edition
User manual SIPLACE TX V2 1 Introduction
From software version 711.1 04/2018 1.1 Important notes on the user manual
15
All the menus and other information are available in two languages: You can choose between the
German and English versions.
The various headings contain information on
– Our products
– Services
– Contacts, etc.
Registered customers can also access the SIPLACE User Group. There you can call up special
information on our placement machines, such as
– Technical documentation
– Technical information
– Spare parts catalogs etc.
Registering for access to the User Group is easy:
Click on ’Register now’.
Complete the registration form and just send it off.
You will then quickly receive access authorization with USER ID and a password.