00198442-01_UM_TX-V2_EN - 第154页
3 Technical data and assemblies User manual SIPLACE TX V2 3.9 Component trolley From software ver sion 711.1 04/2018 154
User manual SIPLACE TX V2 3 Technical data and assemblies
From software version 711.1 04/2018 3.9 Component trolley
153
3.9.5 SIPLACE TX-Series tape container
3.9.5.1 Description
The tape container can hold reels with a diameter of 13" and 7" (option).
3
Fig. 3.9 - 6 SIPLACE TX-Series component trolley, with tape container
(1) Tape container with separating plate
(2) Tape reel 7" (optional)
(3) Tape reel 13"
(4) Waste tape container
3
PLEASE NOTE
Using spindles
TX component trolleys do not generally need spindles.
Use spindles if the error message "Timeout" appears frequently on the X feeder
module.
(3)
(2)
(4)
(1)
3 Technical data and assemblies User manual SIPLACE TX V2
3.9 Component trolley From software version 711.1 04/2018
154
User manual SIPLACE TX V2 4 Setting up and commissioning
From software version 711.1 04/2018 4.1 Safety instruction for transportation
155
4 Setting up and commissioning
4.1 Safety instruction for transportation
4
4
4
WARNING
Observe the applicable accident prevention regulations!
The applicable accident prevention regulations concerning the transportation of
heavy goods must be followed.
WARNING
Risk of injuries!
Make sure that there are no people in the hazard area.
DANGER
Risk of placement machine tilting - only transport the placement machine with shipping
braces and steel spacers fitted.
There is a risk of tilting if the required specifications for the fork-lift and the attachment
points on the placement machine are not observed!
The placement machine may only be lifted for transportation at the side on which the
output end of the placement machine is located (see section 4.4
, page 165).
Both shipping braces with steel spacers must be fitted to the placement machine
(see fig. 4.2 - 4
, page 163).
The forks of the fork-lift must be pushed between the contact surfaces of the place-
ment machine (machine frame) and the steel spacers. The steel spacers are used
as an additional safety measure to prevent the placement machine from tilting.
Only use the specified fork-lift for transportation of the placement machine. Observe
the specifications of the fork-lift (see section 4.2.5.3
, page 161).
DANGER
Risk of tilting the transportation crate or the pallet!
There is a risk of tilting if the required specifications for the fork-lift are not observed!
Make sure you only use the specified equipment for transportation. Observe the
specifications of the transportation equipment (see section 4.2.5.3
, page 161).