00198442-01_UM_TX-V2_EN - 第158页
4 Setting up and commissioning User manual SIPLACE TX V2 4.2 Configuration when delivered From software version 711.1 04/2018 158 4.2 Configuration when delivered 4.2.1 Services As a special service, SIPLACE offers to re…
User manual SIPLACE TX V2 4 Setting up and commissioning
From software version 711.1 04/2018 4.1 Safety instruction for transportation
157
4
4
WARNING
Risk of damage due to excessive fork spacing!
Increased fork spacing, which means that the placement machine is raised at points out-
side its contact surface, can lead to deformation of the placement machine frame and
cause damage to cables and lines.
The forks may only be opened to a degree which ensures that they are still within the
contact area of the placement machine underside (see fig. 4.2 - 4
, page 163).
WARNING
DANGER OF CRUSHING!
Risk of crushing feet when transporting the placement machine.
Wear special protective shoes.
4 Setting up and commissioning User manual SIPLACE TX V2
4.2 Configuration when delivered From software version 711.1 04/2018
158
4.2 Configuration when delivered
4.2.1 Services
As a special service, SIPLACE offers to realize the complete integration of your SIPLACE place-
ment machine in your production line. With our extensive expertise and by using the right tools
and equipment, we can ensure that the installation process runs smoothly and efficiently. How-
ever, this will require you to clarify the infrastructure aspects in advance and make any necessary
changes at your production facility.
4.2.2 Shipping packaging
The SIPLACE TX is delivered together with the 2 component trolleys in a crate or on a pallet.
Within Europe, the machine and component trolleys will be shipped on two wooden pallets, pack-
aged in plastic film. Outside Europe, the machine and component trolleys are supplied in wooden
crates.
4
4.2.3 Checking a delivery
Check the delivery for damage.
Check the shock sensors at location 1.
Unpack the machine and the accessories and check the delivery for completeness (reference
delivery note).
Document the results in the installation report /acceptance protocol.
CAUTION
Damage from condensation
To avoid damage from condensation, only open the plastic placement machine packag-
ing once the placement machine or the components have adjusted to the ambient tem-
peratures. This can take up to 24 hours.
User manual SIPLACE TX V2 4 Setting up and commissioning
From software version 711.1 04/2018 4.2 Configuration when delivered
159
4.2.4 Shipping braces
The SIPLACE TX has two shipping braces with steel spacers (see item 1 in fig. 4.2 - 1, page 159)
screwed to the feet. In addition, a shipping brace is screwed to the opposite side (see item 2 in
fig. 4.2 - 1
, page 159). Furthermore, the placement machine is secured with wooden brackets to
prevent it slipping. The component trolley is also fixed with shipping braces.
4
Fig. 4.2 - 1 Transportation crate/pallet - shipping braces
(1) Shipping braces with steel spacers - front
(2) Shipping braces with steel spacers - back
The shipping crate or pallet with the shipping braces and steel spacers must be kept for use later
on.
1
2