00198442-01_UM_TX-V2_EN - 第172页
4 Setting up and commissioning User manual SIPLACE TX V2 4.4 Infrastructure at the installation location From software ver sion 711.1 04/2018 172 4.4.3.4 Mains connection - delivery configuration The mains power connecti…
User manual SIPLACE TX V2 4 Setting up and commissioning
From software version 711.1 04/2018 4.4 Infrastructure at the installation location
171
4.4.3.3 Power supply cable - specification
The placement machine is delivered with a mains power cable with the following specifications:
– 5 x 2.5 mm² for 3 x 200 V~ to 3 x 415 V ± 10 %, 50/60 Hz mains voltage for a cable length of
up to 5 meters to the machine mains power connection.
4
4
4
Fig. 4.4 - 4 Terminal panel for connecting the power cable
The mains supply cable is connected to the connection terminals (1) in sector 1 at the output end.
WARNING
Cross-section and length of mains connection cable
The cross-section and length of the mains connection cable influence the Short-Circuit-
Current-Rating (SCCR) of the placement machine.
When replacing the mains connection cable, do not increase the cross-section of the
wires or shorten the length of the cable.
WARNING
Clear marking of electrical leads!
The electrical leads to each individual placement machine and to the options installed
must be clearly labeled and easily assignable.
The regulations of the country in which the machine is operated apply.
(1)
4 Setting up and commissioning User manual SIPLACE TX V2
4.4 Infrastructure at the installation location From software version 711.1 04/2018
172
4.4.3.4 Mains connection - delivery configuration
The mains power connection is configured according to the power supply of the country con-
cerned.
– The placement machine is configured for voltages of 3 x 200 V~ to 3 x 220 V~ ± 10 %; 50/60
Hz.
The placement machines features the mains connection cable WITHOUT connector plug. 4
4
Fig. 4.4 - 5 Description of wires in the mains power cable
– The machine is configured for voltages of 3 x 360 V~ to 3 x 415 V ± 10 %, 50/60 Hz.
The placement machine has a mains power cable WITH a 16A Cekon plug. 4
4
Fig. 4.4 - 6 Assignment in the Cekon plug
1 = (L1): three-phase
2 = (L2): three-phase
3 = (L3): three-phase
4 = (N): neutral conductor
green/yellow = (PE): conductor
PE
L1
L2
L3
N
User manual SIPLACE TX V2 4 Setting up and commissioning
From software version 711.1 04/2018 4.4 Infrastructure at the installation location
173
4.4.4 Overview of the microfuses
4
Fig. 4.4 - 7 Overview of the microfuses
4
Fuse Components Electricity Voltage [V]
F1 Shuttle 6.3 AT 42
F3 Shuttle & Option 6.3 AT 24
F4 Distributor 4.0 AT 24
F5 Monitor 1&2 /CIN 6.3 AT 24
F6 MGCU Supply 6.3 AT 42
F7 Conveyor control 6.3 AT 24
F10 Internal Polyfuse 24