00198442-01_UM_TX-V2_EN - 第21页

User manual SIPLACE TX V2 1 Introduction From software version 711.1 04/2018 1. 3 Placement machine de scription 21 1.3.2 Placement machine serial number The serial number of the machine ca n be found on the typeplate, o…

100%1 / 304
1 Introduction User manual SIPLACE TX V2
1.3 Placement machine description From software version 711.1 04/2018
20
1.3.1 Placement Head Configurations
1
CPP_H = Multistar CPP in high assembly position
CPP_L = Multistar CPP in low assembly position
Machine Placement head Standard cameras Options
SIPLACE
TX1
C&P20 P2 Component camera, type 48 --
CPP_L Component camera, type 30 Component camera, type 45
CPP_H
Component camera, type 30 Component camera, type 45
Stationary camera, type 33 (only at
location 1)
TH Stationary camera, type 33
(only at location 1)
Stationary camera, type 25 (only at
location 1)
SIPLACE
TX2
C&P20 P2 / C&P20 P2 Component camera, type 48 --
CPP_L/CPP_L Component camera, type 30 Component camera, type 45
CPP_H / CPP_H
Component camera, type 30 Component camera, type 45
Stationary camera, type 33 (only at
location 1)
TH / CPP_H
Stationary camera, type 33
(only at location 1)
Stationary camera, type 25 (only at
location 1)
Component camera, type 30 Component camera, type 45
SIPLACE
TX2i
C&P20 P2 / C&P20 P2 Component camera, type 48 --
CPP_L/CPP_L Component camera, type 30 Component camera, type 45
CPP_H / CPP_H Component camera, type 30 Component camera, type 45
User manual SIPLACE TX V2 1 Introduction
From software version 711.1 04/2018 1.3 Placement machine description
21
1.3.2 Placement machine serial number
The serial number of the machine can be found on the typeplate, on the inside of the placement
machine frame at location 1.
1
Fig. 1.3 - 1 Position of typeplate with serial number
(T) Direction of travel
(1) Typeplate
1
PLEASE NOTE
Electrical ratings on the typeplate
The electrical ratings on the typeplate are maximum values. The electrical power actually
consumed depends on the placement machine configuration and the placement pro-
gram.
(1)
1 Introduction User manual SIPLACE TX V2
1.3 Placement machine description From software version 711.1 04/2018
22
1.3.3 EC Declaration of conformity
The product described below:
1
1
Manufactured by
ASM Assembly Systems GmbH&Co.KG
Rupert-Mayer-Str. 44
81379 Munich 1
conforms to the regulations and standards listed in the EC Declaration of
Conformity provided.
1.3.4 Use as prescribed
The product may only be used for the areas of application specified in the catalogues and techni-
cal descriptions i.e. for the placement of SMD components and may only be used together with
the third party devices and components recommended or approved by ASM Assembly Systems
GmbH & Co. KG. Use for a different or extended purpose is not prescribed.
In the case of incorrect usage, ASM Assembly Systems GmbH & Co. KG will not assume liability
for any damage which occurs and will not guarantee the correct and proper function of machine
components.
Use as prescribed also includes compliance with all the instructions in the user manual.
For the product to operate correctly and reliably, it must have been transported, stored, erected
and assembled correctly and must be operated and maintained with care.
Product
Placement machine
Type SIPLACE TX1 SIPLACE TX2 SIPLACE TX2i
Item no.: 588301 588302 588300