00198442-01_UM_TX-V2_EN - 第254页
6 Station extensions Use r manual SIPLACE TX V2 6.1 Nozzle changer From software version 711.1 04/2018 258 6.1.1 Nozzle changer for SI PLACE SpeedSt ar C&P20 P2 6.1.1.1 Short nozzle changer for C&P20 P2 with 4 ma…
User manual SIPLACE TX V2 6 Station extensions
From software version 711.1 04/2018 6.1 Nozzle changer
257
6 Station extensions
For the relevant configurations and other options, refer to the individual specifications for the SI-
PLACE placement machines.
6.1 Nozzle changer
The nozzle changer is available in two variants for the relevant head type:
– Short nozzle changer with 4 magazines and 20 nozzle garages each for the
SIPLACE TX1_V2/TX2 V2
– Narrow nozzle changer with 3 magazines and 20 nozzle garages each for the
SIPLACE TX2i V2
The magazines are seated on a common support. They are centered with two parallel pins and
fixed in place with 4 push buttons. The exact position is determined with two fiducials on each
magazine. The correct seat of the magazines on the basic nozzle changer body is monitored by
microswitches, to prevent a collision of the placement head with any magazines projecting up-
wards. All magazine locations must be filled since the safety circuit stops the placement machine
in response to missing magazines or magazines that are not seated correctly. At the installed noz-
zle station, components can be blown off the nozzles of the SpeedStar and nozzles stripped off
and rejected.
6 Station extensions User manual SIPLACE TX V2
6.1 Nozzle changer From software version 711.1 04/2018
258
6.1.1 Nozzle changer for SIPLACE SpeedStar C&P20 P2
6.1.1.1 Short nozzle changer for C&P20 P2 with 4 magazines
The short nozzle changer with 4 magazines is used with the SIPLACE TX1/2.
Item no. 03103649-xx Nozzle changer basic assembly CP/all - short
Item no. 03101503-xx Nozzle magazine 60xx/40xx with 20 garages
6
Fig. 6.1 - 1 Short nozzle changer for the SIPLACE SpeedStar C&P20 P2 with 4 magazines
6
CAUTION
Only use this nozzle magazine together with the SpeedStar.
User manual SIPLACE TX V2 6 Station extensions
From software version 711.1 04/2018 6.1 Nozzle changer
259
6.1.1.2 Narrow nozzle changer for C&P20 P2 with 3 magazines
The narrow nozzle changer with 3 magazines is used with the SIPLACE TX2i.
Item no. 03129201-xx Nozzle changer for TX2i
Item no. 03101503-xx Nozzle magazine 60xx with 20 garages
6
Fig. 6.1 - 2 Nozzle changer for the SIPLACE SpeedStar C&P20 P2 with 3 magazines
6
CAUTION
Only use this nozzle magazine together with the SpeedStar.