00198442-01_UM_TX-V2_EN - 第262页

6 Station extensions Use r manual SIPLACE TX V2 6.1 Nozzle changer From software version 711.1 04/2018 266 6.1.2.5 T echnical dat a 6 Nozzle changer for the SIPLACE MultiSt ar Number of magazines per location *a SIPLACE …

100%1 / 304
User manual SIPLACE TX V2 6 Station extensions
From software version 711.1 04/2018 6.1 Nozzle changer
265
6.1.2.4 Nozzle magazine with 9 garages for 28xx nozzles
6
Fig. 6.1 - 7 Nozzle magazine for 28xx nozzles
(1) 5 garages for 28xx nozzles with a maximum nozzle length of 12.5 mm
(garage numbers 1, 5, 6, 8 and 9)
(2) 4 garages for 28xx nozzles with a maximum nozzle length of 16.5 mm
(garage numbers 2, 3, , 4 and 7)
(3) Fiducials (only visible when locking plate open)
(1)
(2)
(3)
(3)
6 Station extensions User manual SIPLACE TX V2
6.1 Nozzle changer From software version 711.1 04/2018
266
6.1.2.5 Technical data
6
Nozzle changer for the SIPLACE MultiStar
Number of magazines per location
*a
SIPLACE TX1 V2 / TX2 V2 6
SIPLACE TX2i V2 6
4
3
Max. number of nozzle garages per location
SIPLACE TX1 V2 / TX2 V2 6
SIPLACE TX2i V2 6
80
60
Standard configuration per location
SIPLACE TX1 V2 / TX2 V2 6
6
6
SIPLACE TX2i V2 6
3 magazines with 60 x 20xx nozzle garages
1 magazine with 9 x 28xx nozzle garages
2 magazines with 40 x 20xx nozzle garages
1 magazine with 9 x 28xx nozzle garages
Nozzle types 20xx, 28xx
*)a All magazines in the nozzle changer must be configured.
User manual SIPLACE TX V2 6 Station extensions
From software version 711.1 04/2018 6.1 Nozzle changer
267
6.1.2.6 Configuration example with SIPLACE CPP
The locations 1 and 2 can each accommodate a short nozzle changer with four magazines each
for the CPP head (item 1 in fig. 6.1 - 8
, page 267).
6
Fig. 6.1 - 8 Position of nozzle changer for the SIPLACE MultiStar - configuration example (SIPLACE TX1/TX2)
6
6
NC CPP
Nozzle changer for the CPP with 4 magazines
COT 40 In
Component trolley in the innermost position
COT 40 Out
Component trolley in the outermost position
IC
Stationary camera
PLEASE NOTE
The placement machine stops if magazines are missing
The machine will stop if there are magazines missing or incorrectly fitted.
Use all magazine places.