00198442-01_UM_TX-V2_EN - 第269页

User manual SIPLACE TX V2 6 Station extensions From software version 711.1 04/2018 6.1 Nozzle changer 273 6.1.4.2 T echnical data 6 Nozzle changer for the SIPLACE T winSta r Number of ma gazines Location 1 6 Max. 8 magaz…

100%1 / 304
6 Station extensions User manual SIPLACE TX V2
6.1 Nozzle changer From software version 711.1 04/2018
272
6.1.4 Nozzle changer for the SIPLACE TwinStar
Item no. 03005191-xx Magazine for 2 nozzles
Item no. 03001807-xx Magazine for 1 nozzle
6
Fig. 6.1 - 11 Nozzle changer for the SIPLACE TwinStar
6.1.4.1 Description
This nozzle changer can accommodate up to 8 nozzle magazines. There are two different maga-
zine types available: standard magazines and magazines for special nozzles or grippers. The
magazines are seated on a common support. They are centered with two parallel pins and fixed
in place with two countersunk screws.
User manual SIPLACE TX V2 6 Station extensions
From software version 711.1 04/2018 6.1 Nozzle changer
273
6.1.4.2 Technical data
6
Nozzle changer for the SIPLACE TwinStar
Number of magazines
Location 1 6 Max. 8 magazines for max. 16 nozzle garages
Number of nozzle holders may be freely configured
Standard configuration 3 magazines with two nozzle garages each
1 magazine with one nozzle garage
Nozzle types 5xx (standard)
20xx / 28xx (with nozzle adapter 20xx/28xx on 5xx)
Special nozzles, gripper
6 Station extensions User manual SIPLACE TX V2
6.1 Nozzle changer From software version 711.1 04/2018
274
6.1.4.3 Configuration example with SIPLACE TwinStar
Location 1 can accommodate a nozzle changer with eight magazines for the TwinStar (item 1 in
fig. 6.1 - 12
, page 274).
6
Fig. 6.1 - 12 Position of nozzle changer for the TwinStar - configuration example of SIPLACE TX2
6
NC CPP
Nozzle changer for the CPP with 4 magazines
COT 40 In
Component trolley in the innermost position
COT 40 Out
Component trolley in the outermost position
IC
Stationary camera
NC TH
Nozzle changer for the TwinStar