00198442-01_UM_TX-V2_EN - 第27页
User manual SIPLACE TX V2 2 Operational safety From software version 711.1 04/2018 2.1 Safety instructions 27 2 Operational safety 2.1 Safety instructions 2.1.1 Conventions for the use of hazard symbols This user manual …
1 Introduction User manual SIPLACE TX V2
1.5 Operator levels From software version 711.1 04/2018
26
1.5 Operator levels
Certain functions or menus may only be executed or accessed by specially trained personnel. A
differentiation is made between the following operator levels:
– Production
– Advanced production
– Service (customer)
The operator levels "Advanced production" and "Service (customer)" can be password protected.
Production 1
This operator level includes those people who have been trained to operate the placement ma-
chine. These people are authorized to use any functions associated with operating the placement
machine and may call up any menus needed to use the machine.
Advanced production 1
People with this operator level have completed special training and are authorized to perform
setup tasks e.g. creating setup configurations or determining Vision parameters etc.
Service (customer) 1
People with this operator level are specially trained technicians at the customer end, who can, for
example, define placement machine option settings.
1
User manual SIPLACE TX V2 2 Operational safety
From software version 711.1 04/2018 2.1 Safety instructions
27
2 Operational safety
2.1 Safety instructions
2.1.1 Conventions for the use of hazard symbols
This user manual contains notes that must be observed to guarantee your personal safety and to
avoid damage to equipment. These notes are highlighted by warning triangles and are indicated
as follows according to the level of risk:
2
2
2
2
DANGER
Definition
Danger, as used in this user manual, means that death, severe injury or considerable
damage to equipment will occur if the danger instructions are not followed.
WARNING
Definition
Warning, as used in this user manual, means that death, severe injury or considerable
damage to equipment may occur if the warning instructions are not followed.
CAUTION
Definition
Caution, as used in this user manual, means that slight injury or damage to equipment
may occur if the caution instructions are not followed.
PLEASE NOTE
Definition
A note, as used in this user manual, provides information on the product or indicates a
part of the user manual that requires particular attention.
2 Operational safety User manual SIPLACE TX V2
2.1 Safety instructions From software version 711.1 04/2018
28
2.1.2 Qualified personnel
Qualified or adequately trained personnel means that these people are familiar with the setting up,
operation and preventive maintenance of placement machines and add-on devices and are suit-
ably qualified, e.g.
– have been trained, instructed or authorized to switch on and off, isolate, earth and identify
electrical circuits and system components in accordance with normal safety standards.
– have been trained or instructed in the upkeep and use of appropriate safety equipment in ac-
cordance with normal safety standards.
2.1.3 Important notes on operational safety
The following points MUST be observed in order to maintain operational safety:
2.1.3.1 General
The operational safety of SIPLACE placement machines can only be guaranteed if the place-
ment machine is used as prescribed and in accordance with the instructions in the user/pre-
ventive maintenance manuals (job cards).
Always follow any safety regulations specific to your country.
Make sure that the warning labels are always clearly identifiable and always easily readable.
Replace any damaged warning or notice labels. Replace any labels that are missing.
The placement machine key for releasing the covers on the placement machine must be kept
in a safe place where it is only accessible to qualified personnel!
2
If it is necessary to work on the machine and you do not have adequately trained personnel
within your operation, always call in a ASM Assembly Systems GmbH&Co.KG service engi-
neer! ASM Assembly Systems GmbH&Co.KG will not accept liability for any damage or con-
sequential damage that is the result of unauthorized/incorrect work.
If particularly hazardous situations are identified while the placement machine is in use, the
placement machine operating company must immediately notify the manufacturer in writing
so that appropriate action can be taken to reduce the potential danger.
PLEASE NOTE
Owner's responsibility
The placement machine operating company, and only this operating company, is respon-
sible for the safekeeping of the placement machine key and for ensuring that it is handed
over to authorized persons.