00198442-01_UM_TX-V2_EN - 第279页
User manual SIPLACE TX V2 6 Station extensions From software version 711.1 04/2018 6.5 SIPLACE Shuttle Extension 283 6.5.3 Overview 6 Fig. 6.5 - 1 SIPLACE Shuttle Ex tension - configuration example (1) Shuttle Extens ion…
6 Station extensions User manual SIPLACE TX V2
6.5 SIPLACE Shuttle Extension From software version 711.1 04/2018
282
6.5 SIPLACE Shuttle Extension
Item no. 00588508-xx SIPLACE Shuttle Extension
6.5.1 Description
The Shuttle Extension connects a SIPLACE TX V2 placement machine with another production
device in a placement line, even if this has a different conveyor mode. The Shuttle Extension bal-
ances the positions of fixed trolleys (e.g. fixed side on right to fixed side on outside) or takes over
the distribution from single to dual lane and vice versa.
The Shuttle Extension can be fitted to either the input or output section of the SIPLACE TX V2.
The control system and power supply is provided by the downstream or upstream SIPLACE TX
V2. As part of the placement line, the Shuttle Extension is programmed via SIPLACE Pro.
6
6.5.2 Technical data
PLEASE NOTE
For a detailed description, refer to the
"Shuttle Extension Assembly Instructions and User Manual " [item no. 00198271-xx]
Shuttle extension dimensions
Length
440 mm
Width
680 mm
Height at a conveyor height of 950 mm
1163 mm
Weight of Shuttle Extension
80 kg
Board thickness
0.3 mm to 4.5 mm
Board width
Single conveyor
45 mm to 460 mm
Dual conveyor
45 mm to 260 mm
Board length
50 mm to 375 mm
Board weight
Max. 2 kg
User manual SIPLACE TX V2 6 Station extensions
From software version 711.1 04/2018 6.5 SIPLACE Shuttle Extension
283
6.5.3 Overview
6
Fig. 6.5 - 1 SIPLACE Shuttle Extension - configuration example
(1) Shuttle Extension on the SIPLACE TX input section
(2) Shuttle Extension on the SIPLACE TX output section
(3) SIPLACE TX
(1)
(2)
(3)
6 Station extensions User manual SIPLACE TX V2
6.6 SIPLACE JTF-ML2 From software version 711.1 04/2018
284
6.6 SIPLACE JTF-ML2
Item no. 00588116-xx JTF ML II (tray feeder module)
Item no. 00588177-xx JTF-ML II waffle pack tray cassette 7
Item no. 00588199-xx JTF-ML II waffle pack tray cassette 9
Item no. 00588117-xx Assembly kit forJTF ML 2
Item no. 00588112-xx Changeover table JTF-ML
6.6.1 Description
The SIPLACE JTF-ML 2 is an automatic changer for standard JEDEC waffle pack trays. The SI-
PLACE TX can accommodate a SIPLACE JTF-ML 2 at location 1. The SIPLACE JTF-ML 2 is fitted
either next to the output conveyor or at the side of the component trolley.
Depending on the magazine type, the SIPLACE JTF-ML 2 stores up to 18 thin or 14 thick JEDEC
waffle pack trays in an exchangeable cassette and supplies them as required. The placement ma-
chine can therefore be supplied with different component types at variable changeover times.
To use a JTF-ML, fit location with the component trolley for JTF-ML 2, item no. 03123556-02. The
output conveyor extension must also be present.