00198442-01_UM_TX-V2_EN - 第285页
User manual SIPLACE TX V2 6 Station extensions From software version 711.1 04/2018 6.7 Stationary ca meras 289 6.7.2 St ationary P&P compone nt camera (type 33) 55 x 45, digit al (IC camera) Item no. 00588100- xx S t…
6 Station extensions User manual SIPLACE TX V2
6.7 Stationary cameras From software version 711.1 04/2018
288
6.7.1.2 Technical data
6
Component dimensions 0.2 mm x 0.2 mm up to 16 mm x 16 mm for single component
measurement
Component range 0402 to SO, PLCC, QFP, sockets, plugs, BGA, special components,
bare dies, flip-chips, shields
Min. lead pitch 0.25 mm
Min. lead width 0.1 mm
Min. ball pitch 0.14 mm
Min. ball diameter 0.08 mm
Field of vision 19.4 mm x 19.4 mm
Illumination type Front-illumination (6 levels, programmable as required)
User manual SIPLACE TX V2 6 Station extensions
From software version 711.1 04/2018 6.7 Stationary cameras
289
6.7.2 Stationary P&P component camera (type 33) 55 x 45, digital (IC camera)
Item no. 00588100-xx Stationary camera fore the CPP head /TH, type 33
6
Fig. 6.7 - 2 Structure for the stationary P&P component camera, type 33, 55 x 45, digital
(1) Camera housing with integral camera and camera amplifier
(2) Glass plate - illumination and lens levels below
6.7.2.1 Safety instructions
6
(1)
(2)
WARNING
Risk of collisions!
When changing the placement head from a TwinStar/VHF to a SpeedStar, the SpeedStar
collides with the camera housing.
Dismantle the stationary component camera for the TwinStar.
6 Station extensions User manual SIPLACE TX V2
6.7 Stationary cameras From software version 711.1 04/2018
290
6.7.2.2 Technical data
6
Component dimensions 0.5 mm x 0.5 mm to 55 mm x 45 mm
Component range 0402, MELF, SO, PLCC, QFP, electrolytic capacitors, BGA
Min. lead pitch 0.3 mm
Min. lead width 0.15 mm
Min. ball pitch 0.35 mm
Min. ball diameter 0.2 mm
Field of vision 65 mm x 50 mm
Illumination type Front-illumination (6 levels, programmable as required)