00198442-01_UM_TX-V2_EN - 第286页

6 Station extensions Use r manual SIPLACE TX V2 6.7 Stationary came ras From software version 711.1 04/2018 290 6.7.2.2 T echnical dat a 6 Component dimensions 0.5 mm x 0.5 mm to 55 mm x 45 mm Component range 0402, MEL F…

100%1 / 304
User manual SIPLACE TX V2 6 Station extensions
From software version 711.1 04/2018 6.7 Stationary cameras
289
6.7.2 Stationary P&P component camera (type 33) 55 x 45, digital (IC camera)
Item no. 00588100-xx Stationary camera fore the CPP head /TH, type 33
6
Fig. 6.7 - 2 Structure for the stationary P&P component camera, type 33, 55 x 45, digital
(1) Camera housing with integral camera and camera amplifier
(2) Glass plate - illumination and lens levels below
6.7.2.1 Safety instructions
6
(1)
(2)
WARNING
Risk of collisions!
When changing the placement head from a TwinStar/VHF to a SpeedStar, the SpeedStar
collides with the camera housing.
Dismantle the stationary component camera for the TwinStar.
6 Station extensions User manual SIPLACE TX V2
6.7 Stationary cameras From software version 711.1 04/2018
290
6.7.2.2 Technical data
6
Component dimensions 0.5 mm x 0.5 mm to 55 mm x 45 mm
Component range 0402, MELF, SO, PLCC, QFP, electrolytic capacitors, BGA
Min. lead pitch 0.3 mm
Min. lead width 0.15 mm
Min. ball pitch 0.35 mm
Min. ball diameter 0.2 mm
Field of vision 65 mm x 50 mm
Illumination type Front-illumination (6 levels, programmable as required)
User manual SIPLACE TX V2 6 Station extensions
From software version 711.1 04/2018 6.8 Support pin
291
6.8 Support pin
Item no. 00119680-01 Support pin
Wide boards tend to deflect during placement such that, under certain circumstances, the compo-
nents can no longer be placed with the desired accuracy. Highly curved PCBs also affect the
placement accuracy. This problem can be easily rectified by fitting support pins on the lifting table.
6
Fig. 6.8 - 1 Support pin
(1) Magnetic base
6
PLEASE NOTE
Make sure that the magnetic base of the Support Pin is not placed under the side wall of
the conveyor. This could lead to the side wall profile being damaged.
(1)