00198442-01_UM_TX-V2_EN - 第69页
User manual SIPLACE TX V2 2 Operational safety From software version 711.1 04/2018 2.4 Safety instructions for operation 69 2.4.1 1 Safety instructions for em ptying the waste t ape cont ainer The waste t ape cont ainer …
2 Operational safety User manual SIPLACE TX V2
2.4 Safety instructions for operation From software version 711.1 04/2018
68
2.4.9 Safety instructions for the component cameras of the TwinStar during place-
ment head change
2
2.4.10 Safety instructions for docking the component trolley in or out
2
2
2
2
WARNING
Risk of collisions!
When changing the placement head from a TwinStar/VHF to a SpeedStar, the SpeedStar
collides with the camera housing.
Dismantle the stationary component cameras of type 33, 55 x 45, and type 25, 16 x
16 for the TwinStar.
WARNING
Operation only with component trolley!
The placement machine may only be operated if there is a component trolley present
and docked at each location.
Fill any free locations with dummy feeder modules as described in
section 2.5.4
, page 82.
WARNING
DANGER OF CRUSHING!
Risk of crushing when docking and undocking the component trolley.
Always dock/undock the component trolley alone.
CAUTION
Risk of breaking handles!
Risk of breaking handles when transporting the component trolley.
When transporting the component trolley, do not lift it by its handles.
CAUTION
Risk of injuring limbs!
Risk of injuring limbs when docking and undocking.
When docking and undocking, make sure that there are no body limbs in the travel
area of the component trolley.
User manual SIPLACE TX V2 2 Operational safety
From software version 711.1 04/2018 2.4 Safety instructions for operation
69
2.4.11 Safety instructions for emptying the waste tape container
The waste tape container must be pulled out of the component trolley for emptying. There is a risk
of catching your thumbs as you do so. To prevent this, observe the safety instructions in section
5.8.2
, page 230.
2 Operational safety User manual SIPLACE TX V2
2.5 Safety features From software version 711.1 04/2018
70
2.5 Safety features
2.5.1 Protective covers
The travel range of the gantries is covered with two movable protective covers. The protective
hoods and covers serve as protective devices which prevent unauthorized access to the inside of
the placement machine.
2
2
Fig. 2.5 - 1 Protective covers
(1) Protective cover location 1
(2) Protective cover location 2
(T) Direction of travel
CAUTION
Risk of damage!
The protective covers and other covers could be damaged if too much force is exerted.
Do not stand on or climb up the protective covers and other covers.
(1)
(2)