00198442-01_UM_TX-V2_EN - 第81页
User manual SIPLACE TX V2 2 Operational safety From software version 711.1 04/2018 2.5 Safety features 81 2.5.3.2 Enabling the EMERGENCY STOP If problems occur , the SIPLA CE TX can be stopped by pressing the EMERGENCY S…
2 Operational safety User manual SIPLACE TX V2
2.5 Safety features From software version 711.1 04/2018
80
2
Fig. 2.5 - 6 EMERGENCY STOP loops
Start button pressed?
No
Yes
No
Yes
No
2
Active
Safety cutoff No
Voltage
Y axis 0 V
X axis 0 V
Star axis 0 V
DP axis 42 V-
Z axis (C&P, TH) 42 V-
Z axis (CPP) 0 V-
Active
PCB conveyor No
Lifting table No
PCB clamping No
Width adjustment No
Tape cutter No
Component trolley feeding device Yes
EMERGENCY STOP button
pressed?
- Protective cover open?
Position switch on the com-
ponent trolley interrupted?
0
Active
Safety cutoff Yes
Voltage
Y axis 300 V-
X axis 300 V-
Star axis 160 V-
DP axis 42 V-
Z axis (C&P, TH) 42 V-
Z axis (CPP) 160 V-
Active
PCB conveyor Yes
Lifting table Yes
PCB clamping Yes
Width adjustment Yes
Tape cutter. Yes
Component trolley feeding device Yes
Yes
Yes
Compressed
air min. 0.5 MPa
(5.0 bar)?
Yes
User manual SIPLACE TX V2 2 Operational safety
From software version 711.1 04/2018 2.5 Safety features
81
2.5.3.2 Enabling the EMERGENCY STOP
If problems occur, the SIPLACE TX can be stopped by pressing the EMERGENCY STOP button.
An EMERGENCY STOP can be triggered by:
– Pressing one of the EMERGENCY STOP buttons on the placement machine
In these cases, the safety cutoffs are triggered and the power contactors will be switched off within
100 ms or 500 ms (STOP category 1, controlled shutdown with interruption of power supply during
downtime).
2.5.3.3 Resetting an EMERGENCY STOP
To reset an EMERGENCY STOP, unlock the EMERGENCY STOP button.
Find out the reason why the EMERGENCY STOP button triggered.
Remove the cause.
Unlock the relevant EMERGENCY STOP button.
2.5.3.4 Resetting the lock
Close the open protective cover.
2.5.3.5 Triggering the lock
Opening the protective cover.
2 Operational safety User manual SIPLACE TX V2
2.5 Safety features From software version 711.1 04/2018
82
2.5.4 Hand guards at the locations with dummy feeders
2
Fig. 2.5 - 7 Hand guard on the component trolley locations
2
(1) Dummy feeder SIPLACE X, item no. 00141226-xx
WARNING
Operatio nal
Operational safety by occupying every second location!
The operational safety of the component trolley in the SIPLACE TX V2 is ensured if at
least every second free location is occupied with a feeder module or hand guard (dummy
feeder).
Fit a hand guard at locations 1 and 2.
Even when configuring a holder for waffle pack trays, secure every second location
with a hand guard.