00196775-0102_OM_DockingStation_SX_EN - 第18页
2 Operating Safety Docking Station for SIPLACE SX Changeover Tables 2.3 ESD guidelines Operating Manual 14 2.2.2.2 Warning Label W 203 Part No.: 03009342-01 Label locations: 2x on the docking station for SIPLACE SX chang…
13
Docking Station for SIPLACE SX Changeover Tables 2 Operating Safety
Operating Manual 2.2 Warning Signal and Warning and Danger Labels
2.2 Warning Signal and Warning and Danger Labels
2.2.1 Cleaning the Warning Labels
WARNING
Do not use harsh detergents or solvents for cleaning the warning labels.
Be sure to replace any warning labels that are missing, damaged, or no longer readable.
Pay attention to the correct location of the warning labels.
2.2.2 Warning and Danger Labels
2.2.2.1 Warning Label W 206
Part No.: 03009345-01
Label locations: On the docking station for SIPLACE SX changeover tables
- Covers for the power supply
Number per machine: 4
Class: WARNING
Dangerous voltage!
Parts labelled with this sticker are live even when the main switch is switched
off.
Disconnect the machine from the supply system before commencing any
service work!
NAFTA Region: Risk Of Electric Shock Or Burn.
Fig. 2 - 1 Warning label W206, part no. 03009345-01
Fig. 2 - 2 Warning label W206, part no. 03009345-01 - label locations
2 Operating Safety Docking Station for SIPLACE SX Changeover Tables
2.3 ESD guidelines Operating Manual
14
2.2.2.2 Warning Label W 203
Part No.: 03009342-01
Label locations: 2x on the docking station for SIPLACE SX changeover tables
– 1x each on the left and right behind the power and data interface on
the housing.
Number per machine: 2
Class: WARNING
CRUSHING DANGER!
Reaching inside may result in injury to arms and hands.
Do not reach into the running machine!
Fig. 2 - 3 Warning label W203, part no. 03009342-01
Fig. 2 - 4 Warning label W203, part no. 03009342-01 - label locations
2.3 ESD guidelines
Please observe the information on the ESD directives as indicated in the operating manual of the
placement system.
15
Docking Station for SIPLACE SX Changeover Tables 3 Product Description
Operating Manual 3.1 Functional Description
3 Product Description
Part No. 00116965-01 docking station for SIPLACE SX changeover tables
3.1 Functional Description
General
The docking station is an additional component to the pre-setup station. It is the link between the
pre-setup station and the changeover table of the SIPLACE X-series. The docking station allows
the external setup of changeover tables with feeder modules, function tests and setup checks.
1
5
3
2
4
7
8
6
Fig. 3 - 1 Docking station for SIPLACE SX
(1) Docking station (5) Sensor for changeover table detection
(2) Changeover table docking device X-series (6) Control buttons
(3) Skid strips for guiding and docking the
component table
(7) EDIF (power and data interface)
(4) Pneumatic cylinder for locking the changeover
table
(8) Adjustable feet for height adjustment and
fastening to the ground