00196775-0102_OM_DockingStation_SX_EN - 第25页
21 Docking Station for SIPLACE SX Changeover Tables 3 Product Description Operating Manual 3.4 Installation and Mounting 3.4.2 Mounting The docking station is anchored to the floor with four heavy duty anchors TA M, ∅ 12…
3 Product Description Docking Station for SIPLACE SX Changeover Tables
3.4 Installation and Mounting Operating Manual
20
3.4 Installation and Mounting
To ensure safe operation of the docking station, it must be mounted as described below.
3.4.1 Mounting Accessories
The mounting accessories are provided in a separate package. This package is identified with the
label shown below.
Contents:
1. Power cable
2. Fastening parts
Fig. 3 - 5 Mounting accessories
3.4.1.1 Fastening Parts
4x heavy duty anchor TA M, ∅12 mm
4x cylinder head screw, DIN EN ISO 4762 M8x80-8.8
4x washer, DIN EN ISO 7090 8.4-140HV
21
Docking Station for SIPLACE SX Changeover Tables 3 Product Description
Operating Manual 3.4 Installation and Mounting
3.4.2 Mounting
The docking station is anchored to the floor with four heavy duty anchors TA M, ∅12 mm and the
other fastening parts.
1
2
3
Fig. 3 - 6 Fastening and hole pattern
(1) Position the docking station in its intended location and align it.
(2) Align the holes in the adjusting feet plates with the holes in the metal sheet on top.
(3) Mark the front hole of each adjusting feet plate or mark it with an appropriate tool.
(4) Place the docking station aside.
(5) Drill the four holes with a diameter of 12 mm and a depth of 80 mm.
(6) Insert the heavy duty anchors into the drilled holes.
(7) Reposition the docking station at its location and fasten it with the provided screws.
3 Product Description Docking Station for SIPLACE SX Changeover Tables
3.4 Installation and Mounting Operating Manual
22